Tension Springs -Set of 2 202718
Works With Model A202S!
$10.45
In Stock
- Fix Number:
- FIX2016844
- Manufacturer #:
- 202718
- Manufactured by:
- Whirlpool
Works With Model A202S!
Jump to:
Product Description
This is a set of 2 tension springs.
-
Works with the following brands:Maytag, Jenn-Air, International
-
Works with the following products:Washer, Washer Dryer Combo
-
Fixes the following symptoms:Burning smell, Will not agitate, Spins slowly
-
Part# 202718 replaces these:AP4023504, 434716, 2-11946, 2-2718, 202718, 211946 ... Show more , 22001442 Show less
- Works with the following brands:
- Maytag, Jenn-Air, International
- Works with the following products
- Washer, Washer Dryer Combo
- Fixes the following symptoms
- Burning smell, Will not agitate, Spins slowly
- Part# 202718 replaces these:
- AP4023504, 434716, 2-11946, 2-2718, 202718, 211946, 22001442
Part Number Cross Reference
Questions and Answers
Be the first to ask our experts a question about this part!
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
View More
View Less
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
1980 Maytag tub/basket wobble on spin, tub off center when stopped
After removing the front panel I found one damper pad was hanging half out. After lifting the tub with a piece of 4x4 PVC found a second pad totally gone. Suggestions: use the 4x4 lift method works fine if you position the washer so you can remove the rear round access panels and work behind the washer to clean/install the rear pad. A sho
... Read more
rt piece (6" roughly) of 2x4 or similar works good to "prop" the whole tub forward to re-attach the front spring last. Replacing pads and belt didn't cure the tub/basket wobble but then tuning-adjusting the springs tensions nuts individually with (and without) a load in the tub on spin did re-center the tub and equalized-reduced somewhat (40%?) the amount of tub-basket spin balance wobble. Yes the washer is leveled very carefully in both axis. Replaced the original motor tension springs and (worn!) drive belt to hopefully extend the life. DEFINITELY worth the effort to keep my wife happy!!!!
Read less
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX2016844
Manufacturer Part Number: 202718
Manufacturer Part Number: 202718
Brand | Model Number | Description |
---|---|---|
Maytag | A100S | Washer - Top Loading |
Maytag | A101 | Washer - Top Loading |
Maytag | A102 | Washer - Top Loading |
Maytag | A102S | Washer - Top Loading |
Maytag | A103 | Washer - Top Loading |
Maytag | A103S | Washer - Top Loading |
Maytag | A104 | Washer - Top Loading |
Maytag | A105 | Washer - Top Loading |
Maytag | A106 | Washer - Top Loading |
Maytag | A106S | Washer - Residential |
Maytag | A107 | Washer - Top Loading |
Maytag | A107S | Washer - Residential |
Maytag | A108 | Washer - Top Loading |
Maytag | A108S | Washer - Residential |
Maytag | A110 | Washer - Top Loading |
Maytag | A112 | Washer - Top Loading |
Maytag | A15CA | Washer |
Maytag | A15CM | Washer |
Maytag | A15CT | Washer |
Maytag | A16CA | Washer |
Maytag | A16CM | Washer |
Maytag | A16CT | Washer |
Maytag | A17CA | Washer |
Maytag | A17CM | Washer |
Maytag | A17CT | Washer |
Maytag | A180 | Washer - Top Loading |
Maytag | A181 | Washer - Top Loading |
Maytag | A182 | Washer - Top Loading |
Maytag | A183 | Washer - Top Loading |
Maytag | A18CA | Washer |
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.