Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
High Temperature Adhesive - 2oz. WPY055980
$26.89
In Stock
- Fix Number:
- FIX11757492
- Manufacturer #:
- WPY055980
- Manufactured by:
- Whirlpool
- Product Description
- This is replacement high temperature adhesive for your washer and dryer. It is designed to hold objects together, and will not disintegrate at a high temperature. This is a 2-ounce tube of adhesive that is sold individually. This is an OEM product sourced directly from the manufacturer.
- Works with the following brands:
- Maytag, Jenn-Air
- Works with the following products
- Dryer, Washer
- Fixes the following symptoms
- Noisy, Marks left on clothes
- Part# WPY055980 replaces these:
- AP6024142, 055980, 055984, 14205665, 55980, 55984, 7-57185, 7-57186, 757185, 757186, Y055980, Y757185, Y757186
Part Number Cross Reference
Product Description
This is replacement high temperature adhesive for your washer and dryer. It is designed to hold objects together, and will not disintegrate at a high temperature. This is a 2-ounce tube of adhesive that is sold individually. This is an OEM product sourced directly from the manufacturer.
-
Works with the following brands:Maytag, Jenn-Air
-
Works with the following products:Dryer, Washer
-
Fixes the following symptoms:Noisy, Marks left on clothes
-
Part# WPY055980 replaces these:AP6024142, 055980, 055984, 14205665, 55980, 55984 ... Show more , 7-57185, 7-57186, 757185, 757186, Y055980, Y757185, Y757186 Show less
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Leslie
August 19, 2022
What color is the glue? I need white
For model number LG washer
Hello Leslie, Thank you for the question. The glue is a transparent brown color. We hope this helps, good luck with this repair!
Was this helpful?
Thank you for voting!
Related Parts Additional or alternate parts to consider.
View More
View Less
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Ralph from Alexandria, OH
- Parts Used:
- WPY54414, WPY055980, WP56076, WP40113601, WP40111201, WP37001144, WP37001132, WP23748, WP233520
- Difficulty Level:
- Really Easy
- Total Repair Time:
- More than 2 hours
- Tools:
- Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Grinding , drum flopping , .....Noise !
I won't go into all the details of the repairs .....The videos this company provides are A+++.. Some would say I would have been better off purchasing a New dryer ...LOL if I had to use a appliance repair man for this job ...Probably ...but ...using this site certified parts , and using the easy to follow instruction videos ....It was tru
... Read more
ly a very easy repair . I spent more time getting everything perfectly clean inside the dryer housing ,and letting the high temp adhesive cure than I did actually installing the parts.I can't recommend this company or the parts more ...Just take your time with removal , cleaning , and installation ....Patience !Excellent ...parts quality , shipping speed , and video installation instructions !!!! My dryer now works and SOUNDS like a new dryer ....Thank you !
Read less
8 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My washer was making a squeaky noise and vibrating on the rinse cycle.
I unplugged the washer then took the front cover off and took the screws holding the lid out. Then i leaned the washer back against the wall and unscrewed the nuts holding the 3 tub hold down springs. These look like 2 seperate nuts, 1 on top and 1 under the washer bottom but it is 1 long body nut so just put the socket on the bottom and
... Read more
back it all the way off. Then Take the drive and pump belts off and put blocking down under the tub pulley and pull the washer back down so the tub is resting on the Blocking, this will raise it up enough to clean the cone hub where the damper pads go. I used a mirror propped up inside the back of the washer to see the back side of the damper area to clean and install the new pads.The kit does not come with the glue needed to put the pads back on so don't forget to order it with the parts. Also the glue does not give a full cure time so i gave it 24 hours to be sure it was set. then i started putting everything back together. The tub springs gave me the most trouble. I was able to get 1 on easy but the other 2 i had to use a clamp on the support to the spring and use a pry bar to hold the spring down far enough to start the nut back on. But after that it all went easy and quick.This site does a great job with all the helpful instructions, pictures and videos.
Read less
7 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
1980 Maytag tub/basket wobble on spin, tub off center when stopped
After removing the front panel I found one damper pad was hanging half out. After lifting the tub with a piece of 4x4 PVC found a second pad totally gone. Suggestions: use the 4x4 lift method works fine if you position the washer so you can remove the rear round access panels and work behind the washer to clean/install the rear pad. A sho
... Read more
rt piece (6" roughly) of 2x4 or similar works good to "prop" the whole tub forward to re-attach the front spring last. Replacing pads and belt didn't cure the tub/basket wobble but then tuning-adjusting the springs tensions nuts individually with (and without) a load in the tub on spin did re-center the tub and equalized-reduced somewhat (40%?) the amount of tub-basket spin balance wobble. Yes the washer is leveled very carefully in both axis. Replaced the original motor tension springs and (worn!) drive belt to hopefully extend the life. DEFINITELY worth the effort to keep my wife happy!!!!
Read less
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- john from manorville, NY
- Parts Used:
- WPY055980, WP31001747
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Socket set
my dryer started making noise, rough metal on metal sound and clothes took a couple cycles to dry.
Looked in the back of the dryer and rear drum felt was already falling apart so I ripped it out. We actually ran it a couple times without the felt ( do not do this!) Wound up grinding off some metal. My advice is look up a video on whatever repair your doing. Once I removed the drum my felt seal unlike most videos I watched attached to t
... Read more
he back of my dryer and not to the drum itself. Scrape off old adhesive and apply new adhesive which will be recommended if your purchasing felt.my felt seal once its glued on it folds over itself. Slide drum over felt reattach your belt and even with my grinded out metal it ran like new.This site made my repair easy with timely delivery and helpful videos. Hope this helps someone.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- gary from worth, IL
- Parts Used:
- WPY055980, WP40111201, WP37001298, WP37001287, WP37001132
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver, Screw drivers, Socket set
noise while running
r&r front and drum. glue in new seal. watching video really helped.
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Blower wheel is cracked and the front glide bearing is worn out
1. remove the cover from the front by unscrewing two screws in the bottom. 2. remove the cover for the blower wheel by unscrewing around 7 screws 3. remove the clip and the c-clip and pull the blower wheel. 4. replace the blower wheel with a new one and reinstall the rest.
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
★
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Orland B - June 30, 2021
Verified Purchase
Quality
Good quality
Model Compatibility
This part works with the following models:
Fix Number: FIX11757492
Manufacturer Part Number: WPY055980
Manufacturer Part Number: WPY055980
Brand
Model Number
Description
✖
Mail-In Recycling Rebate