Part Location Diagram of WPW10463866 Whirlpool Drive Motor
See part 47 in the diagram
( Grid squares measure 1x1 inch )

Drive Motor WPW10463866

Rated by 1 customers 

?

A Bit Difficult 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$279.15
In Stock
Fix Number:
FIX11755147
Manufacturer #:
WPW10463866
Manufactured by:
Whirlpool

Product Description

This drive motor rotates the drum by turning the belt.

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 2.8 / 5.0, 1 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Paul from Peoria, AZ
Parts Used:
WPW10463866, WP694089, 4392065
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Bad motor and drum belt.
Open the top of the washer with a flat screwdriver it pries open. Removed the top two 5/16 screws from the inside of the front panel and removed the front panel, It has no screws at the bottom. Then remove four 1/2 nuts from the drum panel and remove the drum panel. Take the drum belt off of the drum and remove the drum. Remove the motor by unplugging the one big wire plug and two single blue wires. Be sure to take note of the location that each of the blue wires came from. The blower fan on the outside end of the motor unscrews clockwise and the motor is held in place with two clips. One on each side of the motor. The two drum rollers are each held on with a bolt in the center of them. After the motor is in place the new blower fan is threaded on counter clockwise on the motor shaft. Put the blower fan cover panel back on and reassemble the dryer. make sure the drum belt is in alignment with the motor pulley Also make sure the drum felt around the drum is not folded or torn and reinstall the drum panel. Spin the drum to check for metal on metal and or drag from roller alignment. Reinstall the front panel and close the top of the dryer.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX11755147
Manufacturer Part Number: WPW10463866
Brand Model Number Description
Maytag MED6300TQ0 Dryer - Residential
Maytag MED6400TB0 Dryer - Residential
Maytag MED6400TQ0 Dryer - Residential
Maytag MED6600TQ0 Dryer - Residential
Maytag MGD6300TQ0 Dryer - Residential
Maytag MGD6300TQ1 Dryer - RESIDENTIAL DRYER
Maytag MGD6400TB0 Dryer - Residential
Maytag MGD6400TQ0 Dryer - Residential
Maytag MGD6600TQ0 Dryer - Residential
Maytag MGD6600TQ1 Dryer - RESIDENTIAL DRYER
Whirlpool WED6200SW0 Dryer - Residential
Whirlpool WED6200SW1 Dryer - Residential
Whirlpool WED6400SB0 Dryer - Residential
Whirlpool WED6400SB1 Dryer - Residential
Whirlpool WED6400SG0 Dryer - Residential
Whirlpool WED6400SG1 Dryer - Residential
Whirlpool WED6400SW0 Dryer - Residential
Whirlpool WED6400SW1 Dryer - Residential
Whirlpool WED6600VU0 Dryer - Residential
Whirlpool WED6600VW0 Dryer - Residential
Whirlpool WED6600WL0 Dryer - Residential 29" Electric
Whirlpool WGD6200SW0 Dryer - Residential
Whirlpool WGD6200SW1 Dryer - Residential
Whirlpool WGD6200SW2 Dryer - Residential
Whirlpool WGD6400SB0 Dryer - Residential
Whirlpool WGD6400SB1 Dryer - Residential
Whirlpool WGD6400SB2 Dryer - Residential
Whirlpool WGD6400SG0 Dryer - Residential
Whirlpool WGD6400SG1 Dryer - Residential
Whirlpool WGD6400SG2 Dryer - Residential