Part Location Diagram of WPW10121334 Whirlpool Thrust
See part 18 in the diagram
( Grid squares measure 1x1 inch )

Thrust WPW10121334

Rated by 2 customers 

?

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$5.61
In Stock
Fix Number:
FIX11748620
Manufacturer #:
WPW10121334
Manufactured by:
Whirlpool

Product Description

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.0 / 5.0, 2 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Michael from DUXBURY, MA
Parts Used:
W10837240, WPW10446781, WPW10121334, 661570, WP3389420, 279640
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
Idler pulley snapped off
Completely took dryer apart. Found problem. Ordered part. (Should have over nighted parts. ). Put dryer back together. The part company had a great video on disassemble. Watched it backwards to reassemble Works great. Hope this is helpful.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Joseph from Tucson, AZ
Parts Used:
WP500092, WP40111201, WP37001298, WP37001042, WP23748, WPW10121334
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
Noisy dryer from an obvious part(s) failure.
Removed eight ?" screws (8A X 3/8 Hex Washer Head Tapping) starting with two at bottom kick panel, then two at dryer door panel; disconnect electrical connectors to release door panel from dryer body; remove four screws from dryer opening bulkhead to expose drum and blower impeller; remove two screws securing top dryer panel to side panel s; reach inside right lower access to release dryer belt from idler wheel; lift top panel a little while pulling out bulky drum. Vacuum the heck out of the inside. Even better, do all this outside and take compressed air to the inside. Because this dryer was 19 years old, all three rollers (drum, idler wheel), guides (2), felts(2), and belt were replaced. The noise was caused by seized rollers but all rubber on rollers and belt was cracking, so best to change such old worn out parts. Don't forget to lube all shafts with oil (plumbers silicone best), then reassemble...js
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX11748620
Manufacturer Part Number: WPW10121334
Brand Model Number Description
Kenmore 10687884100 Dryer
Kenmore 10687884300 Dryer
Kenmore 10687884600 Dryer
Kenmore 10697502820 Dryer - Kenmore Dryer Model 106.97502820 (10697502820, 106 97502820) Parts
Kenmore 11051730 Washer
Kenmore 11055594 Washer
Kenmore 1105807410 Dryer
Kenmore 1105808010 Dryer
Kenmore 1105808700 Dryer
Kenmore 1105808800 Dryer
Kenmore 1105808810 Dryer
Kenmore 1105808850 Dryer
Kenmore 1105808860 Dryer
Kenmore 1105817820 Dryer
Kenmore 1105817830 Dryer
Kenmore 1105818810 Dryer
Kenmore 1105818820 Dryer
Kenmore 1105907000 Dryer
Kenmore 1105907100 Dryer
Kenmore 1105907400 Dryer
Kenmore 1105907500 Dryer
Kenmore 1105907501 Dryer
Kenmore 1105907600 Dryer
Kenmore 1105907610 Dryer
Kenmore 1105907700 Dryer
Kenmore 1105907710 Dryer
Kenmore 1105907720 Dryer
Kenmore 1105907721 Dryer
Kenmore 1105907730 Dryer
Kenmore 1105907800 Dryer