Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
Door Hinge WP74008014
$98.46
In Stock
- Fix Number:
- FIX11744215
- Manufacturer #:
- WP74008014
- Manufactured by:
- Whirlpool
- Product Description
- If your oven door is not opening or closing easily, there may be an issue with the door hinge. The hinge uses spring tension to allow the door to stay open at an angle instead of dropping open. This genuine OEM hinge can be used on either the left or righthand side of the door, and measures approximately 20.5 inches long. This part is sold individually, however we recommend replacing both hinges at the same time, as they can wear out a similar rate.
- Works with the following brands:
- Jenn-Air, Maytag, Kenmore, Amana
- Works with the following products
- Wall Oven, Microwave Oven Combo, Cooktop, Range
- Fixes the following symptoms
- Door won’t close
- Part# WP74008014 replaces these:
- AP6011024, 5-80073, 580073, 7-0834, 700834, 71001832, 71002869, 71003350, 7102869, 7106P115-60, 74008014, JA99700834, Y700834
Part Number Cross Reference
Product Description
If your oven door is not opening or closing easily, there may be an issue with the door hinge. The hinge uses spring tension to allow the door to stay open at an angle instead of dropping open. This genuine OEM hinge can be used on either the left or righthand side of the door, and measures approximately 20.5 inches long. This part is sold individually, however we recommend replacing both hinges at the same time, as they can wear out a similar rate.
-
Works with the following brands:Jenn-Air, Maytag, Kenmore, Amana
-
Works with the following products:Wall Oven, Microwave Oven Combo, Cooktop, Range
-
Fixes the following symptoms:Door won’t close
-
Part# WP74008014 replaces these:AP6011024, 5-80073, 580073, 7-0834, 700834, 71001832 ... Show more , 71002869, 71003350, 7102869, 7106P115-60, 74008014, JA99700834, Y700834 Show less
Videos For installing this part.
Replacing your Door Hinge
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts Additional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Carolyn J. from Oswego, KS
- Parts Used:
- WP74008014, 8009
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Screw drivers
Oven door Hinge was broke...Door would just fall open
Watched the video on the repair you supplied...gave us confidence to make the repair. As easy as the video shows. We went ahead and bought 2 hinges and replaced both sides, since we had it apart...We, however, took the opportunity to take the door completely apart and clean it very good. Went back together easy. The new parts fit perfectl
... Read more
y and my oven looks and works like it is brand new..New light bulb was a snap too. So glad I found this company....fast shipping too. Will always look here first in the future.
Read less
6 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Timothy from MARIETTA, GA
- Parts Used:
- WP74008014
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
Broken Door Hinge
As instructed in your video
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Newark, DE
- Parts Used:
- WP74008014
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
Door wouldn't close completely
I read about a lot of people who could not get the door to close after installing one or both hinges. It happened to me as well. The answer was to pull out a little pin right next to the large pin that serves as a pivot for the overall hinge. The small pin was preventing the hinge from retracting all the way. I hope that this helps ot
... Read more
her people who have instead modified their doors with magnets etc. Easy fix. And I have no idea why that little pin is in there. /Users/praiseassembly/Desktop/hinge.jpg
Read less
2 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- nicholas from easton, PA
- Parts Used:
- WP74008014
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
broken spring in the left hinge
viewed the video first. it was very helpful.it should have mentioned not to re move the pins until the door is back in the receptacle slots. I replaced both hinges because of the age of the oven,over 14 yrs. old.i saved well over two hundred dollars.both repair services said the parts were not available. but I found parts select and I tha
... Read more
nk you for coming to my rescue.i will certainly call on you in the future if needed. nick c
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dale from Austin, TX
- Parts Used:
- WP74008014
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Sticky door opening/closing - oven would not close completely
Followed the instructions provided by the video. Obviously some minor changes due to different model, but basically identical. The replacement of the hinges fixed the sticky door, but did not solve the closure issue. So, based on help from others, I bought a set of 4 samarian cobalt Samarium Cobalt Magnets 3/4 in x 1/4 in Disc
... Read more
SMCO-D5
from magnet4less.com . I glued to the oven using J&B weld. Both are rated for temperatures above 500F. Worked perfectly. Both top and bottom close completely now with very little extra pulling force required...
... Read more
SMCO-D5
from magnet4less.com . I glued to the oven using J&B weld. Both are rated for temperatures above 500F. Worked perfectly. Both top and bottom close completely now with very little extra pulling force required...
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
★
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
JOHN A - March 30, 2021
Verified Purchase
correct parts arrived in good condition
This was the correct part for my oven; installation was simple. Parts seemed sturdy and well-made. Door is now smoother than before, as the original hinge looks to have worn out long before the spring finally gave up due to flexing.
Gary H - October 1, 2020
Verified Purchase
Works perfect
I will be ordering from y’all again. It fit perfect and works as it should
Model Compatibility
This part works with the following models:
Fix Number: FIX11744215
Manufacturer Part Number: WP74008014
Manufacturer Part Number: WP74008014
Brand
Model Number
Description
Kenmore
21334
Microwave Oven Combo
- Kenmore Oven/Microwave Combo Model 213.34 (21334, 213 34) Parts
✖
Mail-In Recycling Rebate