Part Location Diagram of WP33001003 Whirlpool Lint Filter
See part 10 in the diagram
Replacing your Maytag Dryer Lint Filter
( Grid squares measure 1x1 inch )

Lint Filter WP33001003

★★★★★
★★★★★
4 Reviews

Rated by 11 customers 

?

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

?
$25.03
In Stock
Fix Number:
FIX11741039
Manufacturer #:
WP33001003
Manufactured by:
Whirlpool

Product Description

This lint filter is a genuine OEM replacement part for your dryer. The lint filter is used to trap debris and prevent it from clogging up your dryer vents. If your lint filter has become damaged it should be replaced. Using your dryer without a lint filter can be a serious fire hazard, along with decreasing the efficiency of the machine. No tools are required to replace this part, simply pull out the old filter and slide the new one into place.

Videos For installing this part.

Replacing your Lint Filter

Replacing your Lint Filter

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.6 / 5.0, 11 reviews.
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
James from SANTA ROSA, CA
Parts Used:
WP6-3129480, WP33001003, 12001541
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers, Socket set, Wrench (Adjustable)
My drier was making rumbling noises.
I followed the video instructions, which were great by the way. Pretty easy to remove the front panel, then housing, then belt, then drum to expose drum support rollers and shafts. Removed old and replaced with new after cleaning lint up a bit. Unfortunately, there is still a bit of a rumble when the drier starts up. I fully expected the changed out parts to make a difference, but it was only a modest improvement. I need to do further trouble shooting and diagnosis.
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Carol from HACIENDA HTS, CA
Parts Used:
WP33001003
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Lint filter was broken.
Step l: Opened clothes dryer door.
Step 2: Removed broken lint filter.
Step 3. Slid new lint filter into place more easily than the old one ever went in (or out).
Step 4. Felt relieved that the ordering and installation was so effortless.
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Phansy from Aloha, OR
Parts Used:
WP33001003, 12112425
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
burning smell in the landry room. after the investigation, I found the washer's belt drive was cracked for sometime.
This is my first time that I have work on the washing machine. The washer is 29 years old. After I got the replacement parts from PartSelect, I started to work on it right away. I unplugged the unit front the wall just in case, because I work alone by myself. I just moved the machine forward a little bit so I can tilt it back that way I c an get access to the drive belts. I removed 2 belts out. The first one is for the pump and the second one is for inside tube I guess. The installation is reverse from the removal. I did run one light load for testing. the machine ran fine, except it likes to walk around the room. I went on line and look for the remedy for that. Finally, I did check the feet rubber pad and leveled just one of them by increase the length a little bit. Now everything is working better. Thank you for providing me the right parts and some tips that I can learn from it.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Lowell A. from Chester, VT
Parts Used:
WP33001003
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Old filter developed holes
Hardest thing was finding right part that fit. It was located on the site and after delivery it was just slid into the holder and it fit.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
steven from Lakeside, CA
Parts Used:
WP33001003
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
torn lint screen in a 29 year old Maytag dryer
reoved the new filter from packaging, threw away damaged filter, installed new filter. A NO BRAINER FOR A CHANGE!!!!!!!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
MARK from Orrington, ME
Parts Used:
WPY312959, WP33001003
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Dryer drum not spinning
Remove front by removing 2 screws at bottom. Remove rear access panel at bottom right. Remove front bracket that holds drum in by removing 4 screws. Put on new belt flat side side down. It does NOT go in the groove! Install on motor pulley and idler per instructions in belt package through the rear access panel. Re-assemble front bracket, front panel, and rear access cover. Done. Remember, the belt does NOT go in the drum groove! No one seems to mention that.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ron from Otsego, MI
Parts Used:
WP33001003
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Old filter holey. Mostly from mice.
Swapped parts
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sandra from Torrance, CA
Parts Used:
WP33001003
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
needed new dryer filter
removed old dryer filter and put new filter into dryer
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Francis from Port Charlotte, FL
Parts Used:
WP33001003
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
No problem
Just put in in to the dyer slot
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Angela from El Paso, TX
Parts Used:
WP33001003
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Lint Filter broke
Replaced the Lint Filter with the Filter obtained from this site It was a perfect replacement fit.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Customer Reviews
Average Rating: (4 Reviews)
5.0
★★★★★
★★★★★
Filter By Rating:
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Model Compatibility

This part works with the following models:
Fix Number: FIX11741039
Manufacturer Part Number: WP33001003
Brand Model Number Description
Maytag DE106 Dryer - Electric
Maytag DE107 Dryer - Electric
Maytag DE110 Dryer - Electric
Maytag DE180 Dryer - Maytag Dryer Model DE180 Parts
Maytag DE18CA Dryer - Electric
Maytag DE18CM Dryer - Electric
Maytag DE18CS Dryer - Electric
Maytag DE18CT Dryer - Electric
Maytag DE19CA Dryer - Electric
Maytag DE19CD Dryer - Electric
Maytag DE19CS Dryer - Electric
Maytag DE19CT Dryer - Electric
Maytag DE210 Dryer - Electric
Maytag DE212 Dryer - Residential
Maytag DE21CM Dryer - Electric
Maytag DE21CT Dryer - Electric
Maytag DE22CA Dryer - Electric
Maytag DE22CS Dryer - Electric
Maytag DE22CT Dryer - Electric
Maytag DE23CD Dryer - Electric
Maytag DE24CA Dryer - Electric
Maytag DE24CM Dryer - Electric
Maytag DE24CS Dryer - Electric
Maytag DE24CT Dryer - Electric
Maytag DE25CS Dryer - Electric
Maytag DE303 Dryer - Residential
Maytag DE308 Dryer - Electric
Maytag DE309 Dryer - Electric
Maytag DE312 Dryer - Residential
Maytag DE313 Dryer - Residential