11739278-1-M-Whirlpool-WP22001304-Water Injector Assembly
Part Location Diagram of WP22001304 Whirlpool Water Injector Assembly
See part 23 in the diagram
11739278-1-S-Whirlpool-WP22001304-Water Injector Assembly 360 view
( Grid squares measure 1x1 inch )
11739278-1-S-Whirlpool-WP22001304-Water Injector Assembly 11739278-2-S-Whirlpool-WP22001304-Water Injector Assembly 11739278-1-S-Whirlpool-WP22001304-Water Injector Assembly 360 view
Part Location Diagram of WP22001304 Whirlpool Water Injector Assembly

Water Injector Assembly WP22001304

Rated by 2 customers 

?

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$50.25
In Stock
Fix Number:
FIX11739278
Manufacturer #:
WP22001304
Manufactured by:
Whirlpool

Jump to:

Product Description

The part includes the hose, water injector and clamp.

  • Works with the following brands:
    Maytag, International
  • Works with the following products:
    Washer
  • Fixes the following symptoms:
    Leaking
  • Part# WP22001304 replaces these:
    AP6006212, 22001304, 22002310
Works with the following brands:
Maytag, International
Works with the following products
Washer
Fixes the following symptoms
Leaking
Part Number Cross Reference
Part# WP22001304 replaces these:
AP6006212, 22001304, 22002310

Questions and Answers

Be the first to ask our experts a question about this part!

Washer Affresh Cleaner
$12.54
In Stock
Part Number: FIX1960673
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Cleaner
$18.43
In Stock
Part Number: FIX12346712
This cooktop cleaning kit includes a scraper and scrub pad that remove build-up and cooked-on spills without scratching or harming your cooktop surfaces and a non-abrasive cleaner that is safe for all glass and ceramic c...
Appliance Cleaner
$23.93
In Stock
Part Number: FIX16227489
This cleaner is ideal for ventilation, microwaves, cooktops, refrigeration, and stainless steel surfaces. It easily removes burnt-on debris and greasy residues. Can be used on kitchen cabinets, countertops, tile and stee...
Affresh Dishwasher Cleaner Tablets - 6
$19.04
In Stock
Part Number: FIX12345667
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Scratch B Gone Stainless Steel Scratch Remover Kit
$126.64
In Stock
Part Number: FIX2340672
This product permanently removes scratches, stains and rust from all brushed surfaces on stainless steel appliances, grills, sinks and more. This is for use on true stainless steel products only
Stainless Steel Cleaner
$15.56
In Stock
Part Number: FIX12717775
Our scratch-free, streak-free formula removes fingerprints, smudges, grease, dirt and oil, while protecting and polishing to repel dust and dirt. Use on all stainless steel appliance brands and surfaces. Stainless Steel ...

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.8 / 5.0, 2 reviews.
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Gregory from Worthington, OH
Parts Used:
WP22001304
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
Water injector cracked. Loose and leaking
UNPLUG THE WASHER

Remove two screws on the bottom front of the washer using a Philips screwdriver. They are one on each corner just underneath the lip. You don't need to lift the washer.

Grip the bottom of the front of the washer and slowly pull forward to un-hinge the front from the top. Once the clips at the t op of the front pop you can remove the front and set aside. You our may need a puddy knife or to wiggle the front back and forth to get the front clips to pop.

Using a socket set remove the two bolts that hold down the top. Each bolt is back in the top front corner. I recommend using a socket extension. After a few turns I was able to remove the bolts by hand.

Remove the 4 screws on the back top of the console. Two screws on each side. Pull the the front panel off and towards you. You will see a single screw in the center of the console floor that holds the injector. Remove that screw.

Wiggle off the hose near the front that is for the bleach.
Lift the lid at the front and hinge back. The injector will be near the back at the hinge. Remove the injector by pulling it to the left from the tab.

Use pliers to squeeze the clip holding the hose near the pump and use a slight twisting motion to raise the clamp an inch or two from the pump. Gently pull the hose off the pump and remove the entire ejector assembly.

While the washer is open I suggest wiping and vacuuming the insides.

Installation is the reverse. Be sure the new hose is fully seated on the pump and the hose clamp is again near the end of the hose.

When reinstalling the screw that holds the injector. Be sure to get it in straight. There is a little white tab near the screw that will go into a hole in the lid base. That will help you guide to find the screw hole and that the injector is fully tightened. DO NOT over tighten.

Don't forget to re-attach the bleach hose as well. And re-bolt the lid.

To re attach the front attach it at the top first. Use a hinging motion to make sure the clips attach. You might need a puddy knife. The joint will be tight and flush if the clips engage properly. They may also click in.

Use the screws to re attach the front at the bottom.
Read less
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from Goleta, CA
Parts Used:
WP22001304
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set, Wrench (Adjustable)
Water Injector Assembly had broken off due to clothes over-load.
Removed rear control panel cover to gain access to the screw holding the water injector assembly in place, and removed screw. Then removed front washer panel in order to gain access to the two bolts securing the top washer panel to the side panels, and lifted top washer panel to gain access to Water Injector Assembly. Removed old one by r emoving one screw from behind the control panel and hose at cold/hot water intake solenoid. Installed the new Water Injector Assembly in reverse order, and reinstalled front washer panel and cover on the back of the control panel.
Read less
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX11739278
Manufacturer Part Number: WP22001304
Brand Model Number Description
Maytag 6329 Washer - MAYTAG AUTOMATIC WASHER
Maytag 6349 Washer - MAYTAG AUTOMATIC WASHER
Maytag 6359 Washer - MAYTAG AUTOMATIC WASHER
Maytag LAT1916AAE Washer - Residential
Maytag LAT1916ABE Washer - Residential
Maytag LAT2200AAE Washer - Residential
Maytag LAT2300AAE Washer - Residential
Maytag LAT2300AWW Washer - Residential
Maytag LAT2301AAE Washer - Residential
Maytag LAT2500AAE Washer - Residential
Maytag LAT2600AAE Washer - Residential
Maytag LAT2914AAE Washer - Residential
Maytag LAT2914AAL Washer - Residential
Maytag LAT2914AAM Washer - Residential
Maytag LAT2915AAE Washer - Residential
Maytag LAT2915AAM Washer - Residential
Maytag LAT2916AAE Washer - Residential
Maytag LAT2916AAM Washer - Residential
Maytag LAT2916ABE Washer - Residential
Maytag LAT3500AAE Washer - Residential
Maytag LAT3500AAQ Washer - Residential
Maytag LAT3600AAE Washer - Residential
Maytag LAT3600AAQ Washer - Residential
Maytag LAT3914AAE Washer - Residential
Maytag LAT3914AAL Washer - Residential
Maytag LAT3914AAM Washer - Residential
Maytag LAT4000AAW Washer - Residential
Maytag LAT4914AAE Washer - Residential
Maytag LAT4914AAL Washer - Residential
Maytag LAT4914AAM Washer - Residential
Water Injector Assembly
$ 50.25
  In Stock
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.