DeWALT Parts

Start With Your Model Number

Need help finding your model number?

Find Parts Fast

Guaranteed Fit

Repair Videos

Popular DeWALT Parts

Brush and Lead

$8.95

In Stock

Add to cart

Fix Number

FIX10181643

Manufacturer Part Number

614367-00

This OEM brush is sold individually, however two are needed in most power tools, and should be replaced at the same time, even if only one is worn. If the motor of your power tool is running poorly, worn brushes are the likely cause. A brush that is worn out will often wear down near the wire lead and can become cracked, pitted, or burned. When replacing the carbon brushes, take this time to check the condition of the armature, if it appears damaged this can indicate more significant motor issues.

Watch the install video

Brush

$5.19

In Stock

Add to cart

★★★★★

★★★★★

1 Review

Fix Number

FIX10188358

Manufacturer Part Number

N097696

Watch the install video

Brush

$13.99

In Stock

Add to cart

Fix Number

FIX10170261

Manufacturer Part Number

381028-08

This carbon brush fits a variety of gardening and lawn tools. The brush is a common replacement part and can easily fix most motor malfunctions. This brush comes with a wire lead and a connection terminal. Inspect the wire lead for any damage and replace immediately if burns or cracks are noticed. Refer to the diagram provided by the manufacturer for installation instructions.

BRUSH BOX ASM

$4.99

In Stock

Add to cart

Fix Number

FIX12522639

Manufacturer Part Number

N292059

Watch the install video

Brush

$8.33

In Stock

Add to cart

★★★★★

★★★★★

2 Reviews

Fix Number

FIX10183735

Manufacturer Part Number

650916-01

Sold Individually This motor brush is for angle grinders. The motor brush transfers electric current to the spinning armature in the motor. Unplug the angle grinder before installing this part. Wear work gloves to protect your hands.

Installation Instructions

Pam from BENBROOK, TX

Worn brush

Honestly I Utubed it, cause it was the first time I've done it and wanted to make sure I did it right, super easy. Read more...

Watch the install video

Hd.Valve Piston

$4.99

In Stock

Add to cart

Fix Number

FIX10246998

Manufacturer Part Number

180450-S

This is a manufacturer-approved replacement head valve and is sold independently. It controls the amount of air that enters the cylinder when the trigger is initiated. This action creates an imbalance in pressure between the cylinder and the air reservoir, allowing the head valve to open, firing the piston. The head valve can harden and crack and the valve body itself can break too. This will usually become obvious because air will leak from the gun exhaust. To access this part for the repair, you will need to remove the top cap from the nail gun.

Watch the install video

Hex Hole Flange

$6.17

In Stock

Add to cart

Fix Number

FIX10188627

Manufacturer Part Number

N134467

Brush and Spring

$8.86

In Stock

Add to cart

★★★★★

★★★★★

1 Review

Fix Number

FIX10166057

Manufacturer Part Number

145323-06

This carbon brush and spring kit includes a carbon brush, wire lead, and a spring. The parts fit a variety of tools such as saws. If you notice your motor is running poorly or is intermittent, then check the brush for damage, cracks, and burns. It is common to replace the brushes repeatedly as they easily wear off from friction and use. Tip: remember to inspect your armature for burns and cracks when replacing your carbon brushes. This will help identify larger motor problems. This part measures to 3/4 inches in length, 1/2 inches in width, and the 1/4 inches in thickness. Refer to the manual for installation instructions and a list of the parts included.

Sander Pad Hook and Loop (Velcro) - 5 Inch

$27.93

In Stock

Add to cart

Fix Number

FIX10106353

Manufacturer Part Number

151281-08

The 151281-08 Pad is used to hold 5 inch Hook and Loop sandpaper with 8 vacuum holes. Over the past few years the popularity of Hook and Loop paper has grown because of the ease of changing sandpaper when needed. Over that of the PSA (Pressure Sensitive Sandpaper) Applying too much pressure on the sander may cause premature wear on the Hook and Loop pad. When a pad needs to be replaced, simply remove the three screws that hold the pad to the sander, then replace it with a new pad.

Watch the install video

Power Cord

$17.56

In Stock

Add to cart

★★★★★

★★★★★

1 Review

Fix Number

FIX10169875

Manufacturer Part Number

330072-98

This power cord is used for power tools and some of the following tools: electric drills, reciprocating saws, jig saws, biscuit joiners, and routers. The power cord is made for double insulated tools and is a two-wire cord with two prongs, but it does not need a ground wire. If there are cuts in the cord insulation, intermittent power during operation, or damaged and bent prongs, then replacing the power cord will solve the problem. The tools needed for this repair are a Phillips screwdriver, small screwdriver, wire cutters/strippers, crimping tool, and terminal (ring or spade). Repair tip: During installation, remember that new cord wires must go correctly into wire terminals. Also, to avoid pinching when the tool case is put back into place, remember to route cord and wires in the right path.

Installation Instructions

John from Hancock, MI

Did not come with grinding disc guard

While unit was unplugged I screwed clamp of guard around grinder. Read more...

DeWALT Appliance Types

• DeWALT Generator Parts
• DeWALT Nailer Parts
• DeWALT Planer Jointer Parts
• DeWALT Pressure Washer Parts
• DeWALT Compressor Parts
• DeWALT Cordless Drill Parts
• DeWALT Drill Press Parts
• DeWALT Electric Drill Parts
• DeWALT Hammer Drill Parts
• DeWALT Radio Parts
• DeWALT Tool Stand & Cart Parts
• DeWALT Workwear Parts
• DeWALT Nibbler & Shears Parts
• DeWALT Laser Level Parts
• DeWALT Worklight & Flashlight Parts
• DeWALT Laminate Trimmer Parts
• DeWALT Router Parts
• DeWALT Angle Grinder Parts
• DeWALT Sander Polisher Parts
• DeWALT Band Saw Parts
• DeWALT Chop Saw Parts
• DeWALT Circular Saw Parts
• DeWALT Jig Saw Parts
• DeWALT Miter Saw Parts
• DeWALT Reciprocating Saw Parts
• DeWALT Scroll Saw Parts
• DeWALT Table Saw Parts
• DeWALT Impact Driver Parts

Popular DeWALT Models

• DXPW3425 (Type 0) Professional Gas Cold Water Pressure Washer
• DXPW3025 (Type 0) Gas Pressure Washer
• C2002 ((TYPE 0)) Air Compressor
• D55146 ((Type 9)) Compressor
• D55146 (Type 2) 4.5 gallon, 200 PSI Hand Carry Compressor
• D55146 (Type 7) Compressor
• D55146 (Type 3) Compressor
• D55146 Type 1 Compressor
• D55146 (Type 4) Compressor
• D55146 (Type 5) Compressor
• D55146 (Type 1) Compressor
• D55146 (Type 8) Compressor
• D55168 (Type 6) Compressor
• D55168 (Type 8) Compressor
• D55168 (Type 1) Compressor
• D55168 (Type 7) Compressor
• D55168 (Type 5) 1.8HP 15G Compressor
• D55168 ((Type 10)) Compressor
• D55168 (Type 9) Compressor
• D55168 (Type 3) Electric Compressor