Part Location Diagram of 285753A Whirlpool Direct Drive Motor Coupling
See part 13 in the diagram
Replacing your Whirlpool Washer Direct Drive Motor Coupling
( Grid squares measure 1x1 inch )

Direct Drive Motor Coupling 285753A

★★★★★
★★★★★
7 Reviews

Rated by 80 customers 

?

Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

?
$27.84
In Stock
Fix Number:
FIX1485646
Manufacturer #:
285753A
Manufactured by:
Whirlpool

Product Description

This is an OEM direct drive motor coupling, which provides a cushioned connection between the transmission and the motor shaft. This is the newer version of this part, made with new metal sleeves for added strength. It is located between the motor and transmission on direct drive washers with no belt. If the drive system seizes, the coupling is designed to break to prevent the drive motor from damage. Consequently, this part may need to be replaced as your appliance ages. Never overload your washer, as this can speed up its deterioration. Symptoms of a faulty motor coupling include a washer pumping but not spinning, slow spinning, the washer not agitating, and unusual noises. This coupling kit contains all the parts necessary to replace your existing direct drive motor coupling. Please note, that after replacing the motor coupling your washer may smell like burning rubber for the first few uses, this is entirely normal as the part becomes acclimated to the machine. Each is sold individually.

Videos For installing this part.

Replacing your Direct Drive Motor Coupling

Replacing your Direct Drive Motor Coupling

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
William
February 12, 2022
washer does not spin to remove water from cloths makes a clicking noise
For model number 110.98575120
Fix.com logo
Hi William, Thank you for your question. If your washer does not spin, there are some parts that you will need to check to see which one is causing the issue. You will need to check the direct drive motor coupling, the lid switch and the clutch assembly. We have included a link that you may reference on how to check these parts. Once you have determined the part you need, please feel free to call customer service. We are open 7 days a week and anyone will be happy to assist you. We look forward to hearing from you!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Additional Links:
View More View Less
Clutch Assembly
$27.55
In Stock
Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Produce Preserver Filter
$21.50
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Cooktop Cleaning Cream
$15.57
In Stock
Cooktop Cleaner
$17.74
In Stock
Affresh Cleaner
$19.09
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.2 / 5.0, 80 reviews.
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Joseph from Burnsville, NC
Parts Used:
285753A
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Washer would not spin or agitate
First, I found it very easy to follow the help on your web site to determine the most likely parts that would cause my problems. The direct drive motor coupling could be the cause of both problems. Also the agitator repair kit was the most likely cause of the agitator problem, So, I ordered both parts. When AI received the parts there w ere videos included instructing every detail for installation. I just followed the video for the direct drive motor coupling and both problems were solved with the one part. It took about 30 minutes and was a simple installation. .Thanks for your good service. It saved me a service call or maybe a new washer and dryer set.
41 of 46 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jerry from Aransas Pass, TX
Parts Used:
WPW10074580, WPW10072840, 285753A, WP8546127, WP358237, WP3363394, 285871, 285811
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set
Agitator not working correctly and leaking from somewhere underneath.
I watched the videos before I ordered the part and when the order arrived I replaced the parts with no problems. The most time consuming part of the job was cleaning the washer. You will be surprised to find what will accumulate down there after years of service. The order came in in record time so this site gets an A+ for being fast a nd accurate. No back-orders either. I will surely use for any-other parts I need in the future.
22 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Paul from Mobile, AL
Parts Used:
285753A, WP8318084, 388253A, WP358237, WP3392519, 285785, 3360629, 279838
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Socket set, Wrench (Adjustable)
would not spin
well i replaced a lot of parts..but i think it was the the lid switch. but now its brand new..Thanks
16 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Greg from Salisbury, NC
Parts Used:
285753A
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench set
Broken Coupling
Open beer. Remove washer and lay it on its side. Drink beer. Remove coupling and order part. Take nap. Wait two days for new coupling. Open beer. Drink beer. Open another beer. Install coupling. Tell wife to do laundry. Take a nap.
10 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Nathan from HOOVER, AL
Parts Used:
285753A
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Socket set, Wrench (Adjustable)
My washer was making a loud rhythmic click/thunk sound during the agitation cycle only, everything else functioned normally.
I disconnected all electric/water hookups and took the washer to a more open area. I tipped it over so it was laying on the back, this way the motor was oriented "upwards" from the central agitator and the motor's weight would be supported during work. Before I took everything out I was able to see the drive coupling from the side and sl owly rotate it, and it was obviously broken into two pieces.

First I removed the metal clasps holding the plastic reservoir against the motor; they were not screwed in so they simply had to be snapped off at the top and maneuvered out of the oblong holes in the motor casing. Then I removed the two similar, but longer, clasps which held the motor onto a metal plate by a similar design. These longer clasps required removing a screw from the top of each clasp (which held the clasps onto the motor casing). After this, the motor required a bit of lifting to take off the plate but there were no other screws or attachments. With the motor set aside, I unscrewed the two bolts holding the plate against the agitator, and the broken coupling was easily removed.

After that all I had to do was place the new coupling and put everything back the way I found it. I would recommend having some WD-40 for the new couplings because they have the reinforced metal in the center; it's nice and strong but it definitely made it a tighter fit especially with the agitator shaft. Overall it took me a while because I'd never done it before and I was figuring it out as I went. But for anyone with experience with tools or similar machines it wouldn't take very long I'd imagine.
8 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
David from FLINT, MI
Parts Used:
285753A
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench set
Washer would not agitate or spin.
I followed the instruction video that was provided on the fix.com site for this part. The repair went just as the video described. No problems.
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Glenn from Lancaster, VA
Parts Used:
285753A, 285785
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable)
Would not spin but did pump water
Repair time of the problem was easier than moving the washer out of a very tight laundry area. The repair was much easier than I anticipated. The parts fit perfectly , And it was successful.
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
David from Hartsville, IN
Parts Used:
285753A
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
The washing machine would not agitate or spin. It would only pump the water out
Unplug the unit for safety. Remove the panel between the dryer and washer. it is held in place by three Philips screws. Use a screw driver to pry up the two clips in the back, one on each side. This will release the top of the washer. Pull it forward and lift it off. There are two screws in the top corners inside of the cabinet. They hold the front of the washer cabinet on. Use a 5/16 socket to remove them. When they are out lift the front slightly to clear the clips at the bottom. Set the front to the side. The motor is right in the front and easy to access. First remove the two clips that hold the water pump in place on the back of the motor. Move it over to the left out of the way. Use the 5/16 socket to remove the screws from the two straps that hold the motor in place. Use the screw driver to pry the straps from the motor. The motor is now free and can be pulled back to reveal the direct drive coupling. Remove the defective coupling from the motor shaft and washer transmission. Install the new coupling onto the washer transmission and reassemble in the reverse
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Lorne from Casselton, ND
Parts Used:
285753A
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
Washer was making a rubbing noise in all cycles.
I watched the video for the direct drive motor coupling. I didn't remove the cabinet, I turned the washer on one side and worked from the bottom of the washer. I didn't remove the pump or hoses, I just removed the clips for the motor and moved it around so I could replace the part on the motor shaft and then replaced the other part on the drive shaft. I inserted the rubber part onto the drive unit and moved the motor around to get in back in place and replace the clips. I really appreciated the video and the fact that this part was available for a 22 year old washer.
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Nicholas from Covington, WA
Parts Used:
285753A, 285785
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
The drum would not spin
I decided to attempt to replace both the clutch and the drive coupling. I had to take apart the couple to do the clutch anyway. Unfortunately I was unable to remove the couple plastic/fiberglass pieces so I only replaced the rubber coupler. The transmission; however, was covered in clutch dust. I put the new one in, put it back together a nd notice my clear plastic drum was disgusting, so I tore it apart somewhat to clean it. Then put it all back together and it works like a champ. Awesome videos for instruction. Next time something fails I am shopping here first.
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Customer Reviews
Average Rating: (7 Reviews)
5.0
★★★★★
★★★★★
Filter By Rating:
  • 5
    7
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Model Compatibility

This part works with the following models:
Fix Number: FIX1485646
Manufacturer Part Number: 285753A
Brand
Model Number
Description
Kenmore
10682872600
Washer - Kenmore Washing Machine Model 106.82872600 (10682872600, 106 82872600) Parts
Kenmore
110088732791
Washer Dryer Combo
Kenmore
11010202000
Washer
Kenmore
11010202001
Washer
Kenmore
1101050299
Washer - Kenmore Washing Machine Model 110.1050299 (1101050299, 110 1050299) Parts
Kenmore
11010502990
Washer
Kenmore
11010502991
Washer
Kenmore
11010852990
Washer
Kenmore
11010852991
Washer
Kenmore
11012202100
Washer
Kenmore
11012502100
Washer
Kenmore
11012852100
Washer
Kenmore
11013202200
Washer
Kenmore
11013212200
Washer
Kenmore
11014102300
Washer
Kenmore
11014112300
Washer
Kenmore
11014202300
Washer
Kenmore
11014212200
Washer
Kenmore
11014222300
Washer
Kenmore
11014502300
Washer
Kenmore
11014852300
Washer
Kenmore
11015732400
Washer
Kenmore
11015842400
Washer - Kenmore Washing Machine
Kenmore
11015852400
Washer
Kenmore
11015862400
Washer
Kenmore
11015864400
Washer
Kenmore
11015942400
Washer
Kenmore
11015942401
Washer
Kenmore
11015944400
Washer
Kenmore
11015944401
Washer