The washer drive pulley kit is also known as a replacement clutch assembly, or a cam kit. The drive pulley is found at the bottom of your washing machine, mounted to the drive shaft. Common symptoms indicating an issue with the part include the washer having difficulty with the wash and spin cycles, or is making a lot of noise. It is likely that the splines on the assembly have become stripped, and the assembly will need to be replaced. To do this repair you will need to disconnect the power and water supply to your washer, and place the washer on its back to access the drive shaft. This kit contains 6 different certified OEM parts that make up the clutch assembly, which includes the pulley, 13 mm nut, cover, gear, cam, and spring.
Works with the following brands:
Whirlpool, Maytag, Kenmore, Amana
Works with the following products:
Washer, Washer Dryer Combo
Fixes the following symptoms:
Will not agitate, Spinning Issues, Noisy and Marks Left on Clothes, Spins slowly
Part# W10721967 replaces these:
AP5951296, W10006352, W10006356, W10006382, W10239971, W10239973
...
Show more, W10315818, W10326374, W10536113, W10721967VP, W10818965, W11396423 Show less
Works with the following brands:
Whirlpool, Maytag, Kenmore, Amana
Works with the following products
Washer, Washer Dryer Combo
Fixes the following symptoms
Will not agitate, Spinning Issues, Noisy and Marks Left on Clothes, Spins slowly
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
7 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Alex
March 8, 2022
Is this normally a cause for loud noise during spin cycle,, Sounds like airplane taking off? Thanks
For model number MVWC400XW3
Hi Alex,
Thank you for your question. If your washer sounds like an airplane taking off, then the bearing is likely worn or damaged and you will need to replace the gearcase. The part number listed under your model number for the gearcase is FIX12347614. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
hi. what is the difference between parts "Washer Drive Pulley" W10721967 and "Pulley Kit" W10759993 ?
For model number 3LWTW4840YW1
Hi Gregory, thank you for the great question. The washer drive pulley kit is also known as a replacement clutch assembly, or a cam kit, it attaches to the basket and rotates the drive shaft. The pulley kit is what spins the basket during the spin cycle. We hope this helps.
Was this helpful?
Thank you for voting!
Gregory
June 7, 2023
Thank you for the quick answer. A follow-up question. The photos for both parts include the pulley and the clutch/cam kit. They look the same except that the pulley in one part is black instead of yellow. Do the photos include more parts than what is specified by the part number?
For model number 3LWTW4840YW1
Hi Gregory, thank you for your follow up question. Each picture shows exactly what is included with the part. Both of these parts have similar but very different functions. We hope this answers your question.
Was this helpful?
Thank you for voting!
David
January 24, 2025
When washer starts to spin it spins slowly, then it makes a loud grinding sound and stops. It does not go in to high speed spin to spin the clothes dry. Can you help?
For model number ATW4676BQ0
Hi David,
Thank you for your question. If the washer makes a grinding sound when in use, the bearing on the gearcase may be worn or damaged and the gearcase will need to be replaced. The part number for the gearcase is FIX16220913. We hope this helps!
I have another problem on this washer, No matter how many times I try to recalibrate it it constantly reverts to draining. And the drain could be on for like 15 minutes sometimes. The pumps working and there is no clogs in the drain.
For model number WTW4655JW2
Hi Earl,
Thank you for your question. If your washer fills and drains at the same time, the drain hose is pushed too far down in the standpipe and it is causing a siphoning effect. The drain hose should not be more than 5 inches down in the standpipe. You will need to reposition it, so the washer can operate normally. We hope this helps!
Would this be the cause of a really loud spin cycle on my washer? sounds like a jet taking off.
For model number WTW4900BW0
Hi Eric, thank you for reaching out. A jet taking off sound could be because of the faulty bearings in the gear case, part number FIX16220910, instead of this clutch assembly. You may need to replace the gear case to fix this issue. We hope this solves your problem!
When unit draws water can hear a screeching sound like the water is being drawn through a restricted orifice. Noise starts following a click noise that sounds like a solenoid valve opening.
Are there any filter screens on the system that could be calcified causing a restriction?
Suggestions as to probable cause of noise?
For model number YWET4027HW0
Hi Jerry, thank you for contacting us. We have concluded that the issue is with the water inlet valve, part number FIX12349484. Good luck with the repair!
The drive belt works with the pulley in your washer in order to spin the tub. If you notice a burning rubber smell, your washer has become excessively noisy, or it will not spin, it could indicate an issue with the drive...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This cooktop cleaning kit includes a scraper and scrub pad that remove build-up and cooked-on spills without scratching or harming your cooktop surfaces and a non-abrasive cleaner that is safe for all glass and ceramic c...
This cleaner is ideal for ventilation, microwaves, cooktops, refrigeration, and stainless steel surfaces. It easily removes burnt-on debris and greasy residues. Can be used on kitchen cabinets, countertops, tile and stee...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
This product permanently removes scratches, stains and rust from all brushed surfaces on stainless steel appliances, grills, sinks and more. This is for use on true stainless steel products only
Our scratch-free, streak-free formula removes fingerprints, smudges, grease, dirt and oil, while protecting and polishing to repel dust and dirt. Use on all stainless steel appliance brands and surfaces. Stainless Steel ...
Our scratch-free, streak-free formula removes fingerprints, smudges, grease, dirt and oil, while protecting and polishing to repel dust and dirt. Use on all stainless steel appliance brands and surfaces. Stainless Steel ...
View Less
★
Customer Reviews
Average Rating:
(2 Reviews)
5.0
★★★★★
★★★★★
Filter By Rating:
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Brandi S - March 3, 2021
Verified Purchase
Great ended up not being the problem!
The part worked great once installed however, we soon realized it was bit the issue and ended up replacing the washer all together.
★★★★★
★★★★★
Edward T - June 6, 2020
Verified Purchase
right part quickly delivered
part was right the instruction video made the job easy and I now have more money because i dont need a new washer thanks!!
Model Compatibility
This part works with the following models:
Fix Number: FIX10057144
Manufacturer Part Number: W10721967
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
