Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
Water Inlet Valve WP22001274
$114.13
In Stock
- Fix Number:
- FIX11739275
- Manufacturer #:
- WP22001274
- Manufactured by:
- Whirlpool
- Product Description
- This washing machine water inlet valve has two ports for water to enter. This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.
- Works with the following brands:
- Maytag, International, Jenn-Air
- Works with the following products
- Washer, Washer Dryer Combo
- Fixes the following symptoms
- Leaking, No hot or cold water
- Part# WP22001274 replaces these:
- AP6006209, 22001273, 22001274
Part Number Cross Reference
Product Description
This washing machine water inlet valve has two ports for water to enter. This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.
-
Works with the following brands:Maytag, International, Jenn-Air
-
Works with the following products:Washer, Washer Dryer Combo
-
Fixes the following symptoms:Leaking, No hot or cold water
-
Part# WP22001274 replaces these:AP6006209, 22001273, 22001274
Videos For installing this part.
Replacing your Water Inlet Valve
Replacing your Water Inlet Valve
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts Additional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Raymond from Ira, MI
- Parts Used:
- WP22001274
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers, Screw drivers
hot water not entering machine. warm & cold only
As per video. However, wires broke off existing terminals & I had to replace. After repair, still no hot water. Now I suspect a bad switch selector.
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kerensky from Tallahassee, FL
- Parts Used:
- WP22001274
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Wrench (Adjustable)
Washer would fill with Water, but would not start, Agitate or drain.
Removing 4 screws from the top of the washer and gently tilting forward and lifting up and the repair area becomes visible. Looking towards the right rear of the washer you will see two bolts (2) holding the Washer Lid Assembly in place. Remove those screws and tilt the assembly to about 70% and remove from its seated location. Remove
... Read more
connectors and reconnect on new assembly respectively. Replace the 2 screws holding the Lid assembly, and replace the top of the washer and secure the four screws. It's that simple! Easiest repair I've done in a long time, and certainly less expensive than a repair man or a new washer. Continued Do-It-Yourself Patron!!!
Read less
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Viateur from Hypoluxo, FL
- Parts Used:
- WP22001274
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
Dripping
Easy as 1-2-3. Turn off the water and electricity. Remove and replace the water inlet valve respecting the previous instalation.
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bonni from Beaver Dam, WI
- Parts Used:
- WP22001274
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers, Wrench set
No Hot water when you turn on the washer
Unplug the washer and turn off both water supplies going to the washer. Take off the two hoses from the back of the machine. Remembering which one is going where. Unscrew the back of the valve housing, and pull out from the back of the machine take out old part and replace with new part and then put back into the machine and return the ho
... Read more
using to where it was before and add the water hoses. Check for leaks. Then plug back into wall.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX11739275
Manufacturer Part Number: WP22001274
Manufacturer Part Number: WP22001274
Brand
Model Number
Description
✖
Mail-In Recycling Rebate