Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
Tapping Screw 1TTL0403032
$8.67
In Stock
- Fix Number:
- FIX3517557
- Manufacturer #:
- 1TTL0403032
- Manufactured by:
- LG
- Product Description
- This metal tapping screw is for washers (exact placement depends on model), it measures 0.5 inches (length) by 0.25 inches (width). This screw is sold individually and requires a Phillips head screwdriver to install.
- Works with the following brands:
- LG
- Works with the following products
- Washer, Washer Dryer Combo
Product Description
This metal tapping screw is for washers (exact placement depends on model), it measures 0.5 inches (length) by 0.25 inches (width). This screw is sold individually and requires a Phillips head screwdriver to install.
-
Works with the following brands:LG
-
Works with the following products:Washer, Washer Dryer Combo
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts Additional or alternate parts to consider.
View More
View Less
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Frank from Ormand Beach, FL
- Parts Used:
- 4434ER0003F, 4036ER4001C, 1TTL0403032
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Screw drivers
bouncing around the drum was shaking around realy bad
took the top off unplug the face plate then the plug on the door lock pulled the spring load ring around rubber seal only on front door put a 12'' piece of wood under the drum just behind the screws then pull just the 2 top pins out of front shocks left/right side only you don't have to take the back one off then unscrew all the screws ar
... Read more
ound the drum you will need a 10mm socket an ex/ratchet remove the balance waits gray one on top brown on the bottom then go around back and pull the small cover remove the bolt reach over the top hold drum loosen bolt almost there once bolt is removed the round winding cover once you done that go around to the front and slide drum out and there is the spider mine was all rotted out remove the 6 little bolts once you remove all the 6 bolts out take a small block of wood and tap with hammer once you have the spider in hand order your parts I replace the spider the rubber o ring gasket around the drum just because I was there that's easy to replace your already there just reverse the process o 1 more thing while you have the drum out clean it just wet it you wont belive all the dirt that is on the drum I save my self about 400 dollars or buying a new one I am back to washing thanks hope that is helpful
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
✖
Mail-In Recycling Rebate