Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
Water Level Switch W10339326
$141.20
In Stock
- Fix Number:
- FIX3408155
- Manufacturer #:
- W10339326
- Manufactured by:
- Whirlpool
- Product Description
- This part is located behind the control panel. It helps determine the level of water in the washer. As the water fills the hose, while tub is filling, it will push the air against a diaphragm inside the switch. More water that enters the tub, more pressure is applied against the switch.
- Works with the following brands:
- Kenmore, Whirlpool, KitchenAid, Crosley
- Works with the following products
- Washer
- Part# W10339326 replaces these:
- AP4568366, 1658886, 3366845, 3950420, W10339326VP
Part Number Cross Reference
Product Description
This part is located behind the control panel. It helps determine the level of water in the washer. As the water fills the hose, while tub is filling, it will push the air against a diaphragm inside the switch. More water that enters the tub, more pressure is applied against the switch.
-
Works with the following brands:Kenmore, Whirlpool, KitchenAid, Crosley
-
Works with the following products:Washer
-
Part# W10339326 replaces these:AP4568366, 1658886, 3366845, 3950420, W10339326VP
Videos For installing this part.
Replacing your Water Level Switch
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts Additional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
WASHER OVER FLOWING AT ANY SETTING
I WATCHED A VIDEO ON HOW TO TAKE THE FRONT AND SIDE PANEL OFF A UPRIGHT WASHING MACHINE FROM PARTSELECT.COM AND THEN HOW TO REPLACE A WATER PRESSURE SWITCH AND NEW PRESSURE HOSE. THE INSTALLATION ONLY REQUIRED TWO SCREW DRIVERS AND A PAIR OF SCISSORS TO CUT THE PRESSURE HOSE TO LENGTH THE SAME AS THE ONE REPLACED.SHUT THE WATER OFF AND U
... Read more
NHOCK THE HOSES AND UNPLUG THEN TWO SCREWS BEHIND THE MAIN TOP PANEL LEFT AND RIGHT SIDE. THE MAIN PANEL THEN FLIPS BACK. THEN WITH A FLAT SCREW DRIVER RELEASE THE TWO METAL SPRING BANDS ON LEFT AND RIGHT SIDE TOP. THE FRONT AND SIDES PANEL ALL TOGETHER LIFT OFF.NOW YOU CAN REPLACE WATER PRESSURE SWITCH AND PRESSURE HOSE. PUT BACK TOGETHER IN REVERSE AND HOOK UP WATER LINES AND PLUG IN TOOK ALL TOGETHER 30 TO 45 MINS.
Read less
4 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer would not fill past a low level no matter the postion of switch
Ordered Water Level Switch which came with a section of hose so I did not need the bag of hose that I ordered as well as switch. Popped off corner pieces on sides of control panel. Removed a small phillips screw on each side holding control panel to top of washer. Removed two phillips screws holding rear metal plate near top to back of
... Read more
switch panel. Tilted control panel ahead and removed hose from old switch. Pulled knob off front. Turned switch approx 1/8 to 1/4 turn counter clockwise to release switch from panel. Reversed to install new. Replaced clear hose and connected to switch. Reinstalled previously removed knob, screws and trim pieces. All done, Yea works!
Read less
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX3408155
Manufacturer Part Number: W10339326
Manufacturer Part Number: W10339326
Brand
Model Number
Description
✖
Mail-In Recycling Rebate