Part Location Diagram of 280187 Whirlpool Drain Pump Kit
See part 7 in the diagram
Replacing your Kenmore Washer Drain Pump Kit
( Grid squares measure 1x1 inch )

Drain Pump Kit 280187

Works With Model 11044934203!

Rated by 7 customers 

?

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$139.09
In Stock
Fix Number:
FIX1485610
Manufacturer #:
280187
Manufactured by:
Whirlpool
Works With Model 11044934203!

Product Description

This washer drain pump fits select front-load models from Whirlpool, Maytag, and Kenmore. It helps remove water during the wash cycle and prevents leaks. Replacing a faulty pump can fix issues like slow draining, error codes, or unusual noises. Be sure to verify compatibility with your washer model before ordering.

Videos For installing this part.

Replacing your Drain Pump Kit

Replacing your Drain Pump Kit

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.9 / 5.0, 7 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Reggie from Annapolis, MD
Parts Used:
280187
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Water not draining. Machine was showing F2
Unplugged machine disconnected wire harness and drain pump connection. Switched out drain pump and connected everything back together.
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Julie from St. James, MN
Parts Used:
280187
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Washer would stop and flash Fo2 code indicating drain promblem,
Replaced drain pump with a universal kit and we are pleased to report washer is running perfect.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jeanne from North Fork, CA
Parts Used:
280187
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
Tub did not drain or spin.
We watched the excellent video and my husband put the new water pump kit in. It worked perfectly. We couldn't be happier as it would have cost a whole lot more to have a repair man come the distance to our house.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
David from Rock Hill, SC
Parts Used:
280187
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers
Pump was not moving water from drum to discharge line.
I had previously taken the old pump and filter out while waiting for new part to arrive. Installed in about 10 minutes. Piece of cake/just a walk in the park to replace.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Thomas from Anacoco, LA
Parts Used:
280187
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Socket set
major difficulty putting the drain hose from the loader onto the pump. The clamp is a beast to sqeeze together while maneuvering it iver the hose and pump inlet shaft
The new pump had grommets on them already even tho they give you new ones. I unscrewed the front screw of the pump from the chassis and put a towel under the hoses carefully. I then disconnected the hose clamps from the pump. It is real easy. In reverse order you start with the drain hose which was difficult, followed by the return drain hose(easy installation), followed by inserting the pump into the grommet holes and screwing the pump to chassis.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Lonny from Ashland, OR
Parts Used:
280187
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
water in washer
replaced drain pump,very easy and accessible when front panel removed with three tork screws.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Scott from Olmsted Falls, OH
Parts Used:
280187
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Drain pump failed
As noted elsewhere, the hardest part was removing the two hose spring clamps and reinstalling the hose spring clamps. It was easier to access the spring clamps by first unmounting the pump so that it could be turned to make the clamps more accessible. I did not re-install the spring clamps but rather used stainless steel screw-type clam ps from an auto parts store. The best tip I read and used was to use a wet/dry shop vac to suck out all the water by attaching it to the discharge tube where it drains into the laundry tub. Lastly, I did not need to modify the wire connector on the new pump.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX1485610
Manufacturer Part Number: 280187
Brand Model Number Description
Kenmore 11042822200 Washer
Kenmore 11042822201 Washer
Kenmore 11042822202 Washer
Kenmore 11042822203 Washer
Kenmore 11042824200 Washer
Kenmore 11042824201 Washer
Kenmore 11042824202 Washer
Kenmore 11042824203 Washer
Kenmore 11042826200 Washer
Kenmore 11042826201 Washer
Kenmore 11042832200 Washer
Kenmore 11042832201 Washer - Kenmore Washing Machine
Kenmore 11042834200 Washer
Kenmore 11042834201 Washer
Kenmore 11042836200 Washer
Kenmore 11042836201 Washer
Kenmore 11042922200 Washer
Kenmore 11042922201 Washer
Kenmore 11042922202 Washer
Kenmore 11042922203 Washer
Kenmore 11042924200 Washer - Kenmore Washing Machine
Kenmore 11042924201 Washer
Kenmore 11042924202 Washer
Kenmore 11042924203 Washer
Kenmore 11042926200 Washer
Kenmore 11042926201 Washer
Kenmore 11042926202 Washer
Kenmore 11042926203 Washer
Kenmore 11042926220 Washer - WASHER
Kenmore 11042932200 Washer