Jump to:
Product Description
This part is used on front load washers and includes the interlock switch assembly.
-
Works with the following brands:Kenmore, Samsung, Whirlpool, Maytag
-
Works with the following products:Washer
-
Fixes the following symptoms:Lid or door won’t close, Will Not Start, Locking Issues, Door latch failure
-
Part# WP8182634 replaces these:AP6011817, 34001265, 8181700, 8182634, DC64-00519B, WP8182634VP
- Works with the following brands:
- Kenmore, Samsung, Whirlpool, Maytag
- Works with the following products
- Washer
- Fixes the following symptoms
- Lid or door won’t close, Will Not Start, Locking Issues, Door latch failure
- Part# WP8182634 replaces these:
- AP6011817, 34001265, 8181700, 8182634, DC64-00519B, WP8182634VP
Part Number Cross Reference
Videos For installing this part.
Replacing your Washer Door Lock Latch

Questions and Answers
Be the first to ask our experts a question about this part!
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Barry from Cincinnati, OH
- Parts Used:
- WP8182634
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Door Lock Latch electronics went bad and did not recognize the door was latched
The only tool needed is a size 2 phillips screw driver. Remove screws in the back of the washer that hold the top lid on. Pull the lid up from the back, pulling up and back to release the tabs in the front. Set the lid aside. Remove the soap dispenser by opening it up all the way, then press the button in the back-center to release th
... Read more
e locking tab while pulling the tray forward. It will come all the way out. Set it aside. Remove the screws holding the front control panel in place. Pull the front panel out and up and place it on the top of the washer (no need to remove the wires..just turn it 180 degrees and lay it on the top of the machine). The screws holding the front of the washer in place will now be exposed. Remove those screws and pull the front foward, providing a few inches of access space behind it (do not fully remove the front panel). Open the washer door. Remove the screws holding the door lock latch to the front panel. Reach behind the front panel and remove the door lock latch. Unplug the wiring harnesses. Take the new door lock latch and plug in the wiring harnesses. Place the new door lock latch in place. To do this, there are several checks to ensure it is in the proper alignment. There is an alignment tab that fits into a hole in the front, and a square opening for the door latch itself. Put the alignment tab the alignment tab hole and put the latch through the square latch opening. Line up the screw holes that hold the door lock latch in place. Replace the screws in the door lock latch. Reverse the steps above to reassemble the washer.
Read less
7 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
★
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Brian R - July 28, 2020
Verified Purchase
successful
The part was fairly easy to replace.
Eduardo L - May 3, 2021
Verified Purchase
Easy to install
Easy to install. I only wish they could take the broken one for re-purposing.
Model Compatibility
This part works with the following models:
Fix Number: FIX11745016
Manufacturer Part Number: WP8182634
Manufacturer Part Number: WP8182634
Brand | Model Number | Description |
---|---|---|
Kenmore | 11042822200 | Washer |
Kenmore | 11042822201 | Washer |
Kenmore | 11042822202 | Washer |
Kenmore | 11042822203 | Washer |
Kenmore | 11042824200 | Washer |
Kenmore | 11042824201 | Washer |
Kenmore | 11042824202 | Washer |
Kenmore | 11042824203 | Washer |
Kenmore | 11042826200 | Washer |
Kenmore | 11042826201 | Washer |
Kenmore | 11042832200 | Washer |
Kenmore | 11042832201 | Washer - Kenmore Washing Machine |
Kenmore | 11042834200 | Washer |
Kenmore | 11042834201 | Washer |
Kenmore | 11042836200 | Washer |
Kenmore | 11042836201 | Washer |
Kenmore | 11042922200 | Washer |
Kenmore | 11042922201 | Washer |
Kenmore | 11042922202 | Washer |
Kenmore | 11042922203 | Washer |
Kenmore | 11042924200 | Washer - Kenmore Washing Machine |
Kenmore | 11042924201 | Washer |
Kenmore | 11042924202 | Washer |
Kenmore | 11042924203 | Washer |
Kenmore | 11042926200 | Washer |
Kenmore | 11042926201 | Washer |
Kenmore | 11042926202 | Washer |
Kenmore | 11042926203 | Washer |
Kenmore | 11042926220 | Washer - WASHER |
Kenmore | 11042932200 | Washer |
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.