Watch the install video
11744957-1-M-Whirlpool-WP8182119-Washer Bellow
Part Location Diagram of WP8182119 Whirlpool Washer Bellow
See part 5 in the diagram
Replacing your Kenmore Washer Washer Bellow
11744957-1-S-Whirlpool-WP8182119-Washer Bellow 360 view
( Grid squares measure 1x1 inch )
11744957-1-S-Whirlpool-WP8182119-Washer Bellow 11744957-2-S-Whirlpool-WP8182119-Washer Bellow 11744957-1-S-Whirlpool-WP8182119-Washer Bellow 360 view
Part Location Diagram of WP8182119 Whirlpool Washer Bellow Replacing your Kenmore Washer Washer Bellow

Washer Bellow WP8182119

Works With Model 11044921302!

Rated by 6 customers 

?

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$156.13
On Order
Fix Number:
FIX11744957
Manufacturer #:
WP8182119
Manufactured by:
Whirlpool
Works With Model 11044921302!

Jump to:

Product Description

This door boot seal serves as the primary gasket between the front bulkhead and the outer tub of your washing machine, ensuring a watertight barrier during operation. It prevents water leakage and supports proper drum function by maintaining a secure seal. Over time, the seal may wear, tear, or become misshapen, leading to leaks or performance issues. This replacement part is sold without clamps, which must be ordered separately if needed. For best results, verify compatibility with your appliance model before installation.

  • Works with the following brands:
    Kenmore, Whirlpool, Maytag, KitchenAid
  • Works with the following products:
    Washer
  • Fixes the following symptoms:
    Leaking, Marks left on clothes
  • Part# WP8182119 replaces these:
    AP6011758, 8182119, W10003800, WP8182119VP
Works with the following brands:
Kenmore, Whirlpool, Maytag, KitchenAid
Works with the following products
Washer
Fixes the following symptoms
Leaking, Marks left on clothes
Part Number Cross Reference
Part# WP8182119 replaces these:
AP6011758, 8182119, W10003800, WP8182119VP

Videos For installing this part.

Replacing your Washer Bellow

Replacing your Washer Bellow

Questions and Answers

Be the first to ask our experts a question about this part!

Washer Bellow To Outer Tub Clamp
$36.84
In Stock
Part Number: FIX11744959
Used to help hold your bellow in place on your washer.
Washer Bellow Clamp
$32.14
In Stock
Part Number: FIX11765855
This is the replacement bellow clamp for your washer. It approximately 16 inches in diameter and is sold individually. The bellow clamp goes around the bellow in your washer and holds it in place on the washer frame. The...
Washer Affresh Cleaner
$12.54
In Stock
Part Number: FIX1960673
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Cleaner
$18.43
In Stock
Part Number: FIX12346712
This cooktop cleaning kit includes a scraper and scrub pad that remove build-up and cooked-on spills without scratching or harming your cooktop surfaces and a non-abrasive cleaner that is safe for all glass and ceramic c...
Appliance Cleaner
$23.93
In Stock
Part Number: FIX16227489
This cleaner is ideal for ventilation, microwaves, cooktops, refrigeration, and stainless steel surfaces. It easily removes burnt-on debris and greasy residues. Can be used on kitchen cabinets, countertops, tile and stee...
Affresh Dishwasher Cleaner Tablets - 6
$19.04
In Stock
Part Number: FIX12345667
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Scratch B Gone Stainless Steel Scratch Remover Kit
$126.64
In Stock
Part Number: FIX2340672
This product permanently removes scratches, stains and rust from all brushed surfaces on stainless steel appliances, grills, sinks and more. This is for use on true stainless steel products only
Stainless Steel Cleaner
$15.56
In Stock
Part Number: FIX12717775
Our scratch-free, streak-free formula removes fingerprints, smudges, grease, dirt and oil, while protecting and polishing to repel dust and dirt. Use on all stainless steel appliance brands and surfaces. Stainless Steel ...
Scratch B Gone Stainless Steel Scratch Remover Kit
$126.64
In Stock
Part Number: FIX2340672
This product permanently removes scratches, stains and rust from all brushed surfaces on stainless steel appliances, grills, sinks and more. This is for use on true stainless steel products only
Stainless Steel Cleaner
$15.56
In Stock
Part Number: FIX12717775
Our scratch-free, streak-free formula removes fingerprints, smudges, grease, dirt and oil, while protecting and polishing to repel dust and dirt. Use on all stainless steel appliance brands and surfaces. Stainless Steel ...
View Less

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.1 / 5.0, 6 reviews.
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Sherry from Lamar, SC
Parts Used:
WP8182119
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Boot between drun and door was leaking
Take top off. Take face and door off . Remove boot . Reinstall new boot replace face then top . Video of repair made it easy
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Steve from Oak Ridge, TN
Parts Used:
W10902779, WP8182210, WP8182119
Difficulty Level:
Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
Replaced Outside Rubber Bellows
Rubber bellows was approximately 8-9 years old with lots and lots of mold on the outside and more inside where water drains out. Removing all the necessary parts to remove and install the replacement bellows was not difficult. The most difficult step was replacing the bellow to outer tube clamp. It is spring loaded and virtually imposs ible for one person to replace. Holding the bellow in place while trying to stretch the spring clamp is frustrating. I am sure, at the factory they have specialized tools that allows assembly of the clamp instantly. The do-it-yourselfer is in trouble unless a second person is available to help. In order to get the spring clamp installed around the outside of the bellow, it was necessary to undo the spring from the clamp and then place the loose clamp around the bellows. Have one person hold the end of the clamp with pliers while the other person stretches the spring to connect to the loop in the clamp. It took quite a bit of strength and several tries to complete. Other than that, not a difficult job.
Read less
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Wayne from CHEYENNE, WY
Parts Used:
WP8182119
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Leaking seal at the front door of washer.
Pulled the outer lip of the seal and found the spring with the wire on the outer rim of the door. Carefully remove the spring and wire all together and placed it inside the washer for safe keeping. Once the ring is removed you can pull on the lip and push it into the washer. In the upper right you will find the screw band. Similar to a hose clamp only bigger. You will need a small flathead screw driver. This was the hardest part of the whole operation. It is hard to get the screwdriver aligned and fit your hand in there as well. Make sure you loosen the screw carefully and ensure it is loose enough for the next step. Once I felt it was loose enough, I carefully removed the hose clamp/clasp and let it sit in the opening between the drum and front door. I was then able to remove the bellows from the inner rim of the washer. This completes the removal part. I lined up the new bellows using the washer's input tube on the front left to ensure it would line up when I tighten down the clamp on the inner drum. Once the bellows was in place and the clamp was on, I checked the alignment again before tightening the clamp with the screw driver. With it loose you can make any adjustments if needed. Then I re-tighten the screw and checked to see if it would move at all. Next you need to re-seat the outer seal to the door and double check to ensure it is on all the way around. This next part can be hard and you will need a second pair of hands. There are a couple of ways you can put the retention ring on the door to the washer. I kept the whole ring and spring together and this is where a second pair of hands will be needed. I placed the retention ring at the top and worked it around the lip. If you have ever changed a tire on a bike it is very similar. Once I had it in place as far as I could get it, my wife held the two spots and using a screw driver I was able to gently get the spring to expand and pop the ring in place. I double checked to ensure it was all in place and snug. Then I double checked the lip of the seal and it all looked good. I had my wife run a rinse without any cloths and checked for leaks. No leaks. It has been working fine ever since. The wife tried to fix it herself with crazy glue and it dried out the ring so that it leaked.
Read less
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from Redding, CA
Parts Used:
WP8182119
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
Edge of seal leaking taking out clothes with metal clasps.
My Kenmore Elite front loading washer is different than the one in the video instructions, in that it has a plastic chrome decorative ring which surrounds the door opening. This chrome ring prevents removal of the top front electrical panel (the panel with all the controls and buttons). You cannot remove the middle door section until th e top panel section is removed. So it was necessary to grip the chrome ring at the top and pull it away. Doing this, destroyed a number of plastic tabs that hold it in place. Fortunately, only the top part of this ring needs to be pulled out so that you can then remove the top panel. Complete removal of the ring would have meant having to buy new brackets that hold it in. After the top/front section was removed, the rest of the procedure went easily, using the t video as a guide.
Read less
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kenneth from Floral Park, NY
Parts Used:
WP8182119
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
Small Bellow Tear
Unplug the machine. 1. Reach over the rear and remove the (3) 1/4 inch hex screws across the top edge. Slide the lid back a few inches. 2. Remove the (2) door retaining screw. Unhook the door. 3. Remove the (2) T-20 door latch screws. 4. Remove the bottom access panels (3) screws. 5. Remove the (2) T-20 dispenser housing screws (after rem oving the dispenser). 6. Put a slotted screwdriver into one end of the rigid part of the spring loaded outer bellow clamp and pry out. Release the bellow from the dispenser lead and release the bellow. 7. From the top of the circular trim ring, lightly pry up the snaps and remove. 8. Remove the last (2) screws holding the control assembly which also holds the door frame. Start on the top left side unsnapping the tabs. Place the assembly on top of the machine. 9. Remove the door frame by removing the bottom (2) screws. 10. Loosen the outer tub clamp to remove the bellow.
Read less
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Cameron from Edmonds, WA
Parts Used:
W10902779, WP8182210, WP8182119
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Unpleasant odor.
Followed the directions in the video. Most of the time was spent cleaning the related parts
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX11744957
Manufacturer Part Number: WP8182119
Brand Model Number Description
Kenmore 1102647751K Washer - Kenmore Washing Machine 1102647751k
Kenmore 11042822203 Washer
Kenmore 11042824203 Washer
Kenmore 11042922202 Washer
Kenmore 11042922203 Washer
Kenmore 11042924202 Washer
Kenmore 11042924203 Washer
Kenmore 11042926202 Washer
Kenmore 11042926203 Washer
Kenmore 11043902202 Washer
Kenmore 11043902203 Washer
Kenmore 11044826301 Washer
Kenmore 11044832202 Washer
Kenmore 11044834202 Washer
Kenmore 11044836301 Washer
Kenmore 11044921301 Washer
Kenmore 11044921302 Washer
Kenmore 11044931301 Washer
Kenmore 11044931302 Washer
Kenmore 11044932202 Washer
Kenmore 11044932203 Washer
Kenmore 11044934202 Washer
Kenmore 11044934203 Washer
Kenmore 11044936202 Washer
Kenmore 11044936203 Washer
Kenmore 11045081400 Washer
Kenmore 11045081401 Washer
Kenmore 11045081402 Washer
Kenmore 11045081403 Washer
Kenmore 11045081404 Washer
Washer Bellow
$ 156.13
  On Order
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.