Part Location Diagram of W10814296 Whirlpool Washer Centerpost Gasket
See part 17 in the diagram
Replacing your Kenmore Washer Washer Centerpost Gasket
( Grid squares measure 1x1 inch )

Washer Centerpost Gasket W10814296

Works With Model 11016202690!

Rated by 5 customers 

?

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$5.77
In Stock
Fix Number:
FIX11723081
Manufacturer #:
W10814296
Manufactured by:
Whirlpool
Works With Model 11016202690!

Product Description

Also known as Main Outer Tub Seal. This part helps to prevent leaking from the bottom of the tub.

Videos For installing this part.

Replacing your Washer Centerpost Gasket

Replacing your Washer Centerpost Gasket

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.3 / 5.0, 5 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Cathie from Philadelphia, PA
Parts Used:
WP3363394, W10814296
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set, Wrench (Adjustable)
Washer was leaking a little. A very small puddle formed underneath and to the left of the machine.
The installation video was sensational and invaluable. I watched it all the way through and then took it step by step as I repaired the machine. I ordered the water pump and the gasket at the same time, not knowing which part would solve the problem. The water pump was the easiest to replace so I replaced that, put the machine back tog ether--only to discover that the leak prevailed. I disassembled the machine again to replace the gasket. I cued up the video and follwed every step. I didn't have a spanner wrench so I had to wait for it to arrive. No hardware store or bib-box store carries this wrench. The hardest part of the whole job was removing that nut from the agitator. The spanner wrench fit perfectly but despite a lot of pounding combined with a lot of lubricant and dissolvant, it wouldn't budge. After 20 years, that nut was really on there. I went to an automotive store and asked for their best-performing lubricant. They recommended PB Blaster Penetrating Catalyst over any of the others, and wow, were they right! I lined the tub with paper towels for protection, sprayed a lot of PB Blaster on the nut, came back in 15 minutes and that nut came right off. It was unbelievable, and I was ecstatic. From there I relied on the video, took my time, cleaned the tub and everything else (which was filthy with tons of pet hair caked on!) put it all back together, hoped for the best, ran a load and was absolutely thrilled that there was no leaking! A really good project and a lot of money saved. I could never have done it and would not have attempted it without that superb installation video.
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
billy from Cypress, TX
Parts Used:
W10814296
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Socket set, Wrench set
water was leaking onto the floor when washer was filling
just like the video said step by step great video. Thank you
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from Waynesboro, VA
Parts Used:
WP389140, W10814296
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
agitator was wobbly
I simply followed the directions on the installation video on your site. Very simple!
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
michael from Vancouver, WA
Parts Used:
63849, W10814296
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Socket set
Tub was cracked, from moving
I went to you tube, on washer tub replacement . Did the repair according to video. Went very well, and simple
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Price from Waverly, TN
Parts Used:
WPW10096921, W10814296, 285871
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Water leak at tub seal.
ctions were excellent.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX11723081
Manufacturer Part Number: W10814296
Brand Model Number Description
Kenmore 10682872600 Washer - Kenmore Washing Machine Model 106.82872600 (10682872600, 106 82872600) Parts
Kenmore 110088732791 Washer Dryer Combo
Kenmore 11010202000 Washer
Kenmore 11010202001 Washer
Kenmore 1101050299 Washer - Kenmore Washing Machine Model 110.1050299 (1101050299, 110 1050299) Parts
Kenmore 11010502990 Washer
Kenmore 11010502991 Washer
Kenmore 11010852990 Washer
Kenmore 11010852991 Washer
Kenmore 11012202100 Washer
Kenmore 11012502100 Washer
Kenmore 11012852100 Washer
Kenmore 11013202200 Washer
Kenmore 11013212200 Washer
Kenmore 11014102300 Washer
Kenmore 11014112300 Washer
Kenmore 11014202300 Washer
Kenmore 11014212200 Washer
Kenmore 11014222300 Washer
Kenmore 11014502300 Washer
Kenmore 11014852300 Washer
Kenmore 11015732400 Washer
Kenmore 11015842400 Washer - Kenmore Washing Machine
Kenmore 11015852400 Washer
Kenmore 11015862400 Washer
Kenmore 11015864400 Washer
Kenmore 11015942400 Washer
Kenmore 11015942401 Washer
Kenmore 11015944400 Washer
Kenmore 11015944401 Washer