Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
Valve Triple Water WH13X10053
$53.24
In Stock
- Fix Number:
- FIX3652834
- Manufacturer #:
- WH13X10053
- Manufactured by:
- GE
- Product Description
- The purpose of the triple water valve is to properly fill your washer with water by controlling the hot and cold water going into the tub. If your washer is overfilling or not filling, you may need to replace this part. It is about 5.5 inches in total length. You will find your water inlet valve at the back of your washer.
- Works with the following brands:
- General Electric
- Works with the following products
- Washer
- Fixes the following symptoms
- Leaking, No hot or cold water
- Part# WH13X10053 replaces these:
- AP5629504, WH13X22314
Part Number Cross Reference
Product Description
The purpose of the triple water valve is to properly fill your washer with water by controlling the hot and cold water going into the tub. If your washer is overfilling or not filling, you may need to replace this part. It is about 5.5 inches in total length. You will find your water inlet valve at the back of your washer.
-
Works with the following brands:General Electric
-
Works with the following products:Washer
-
Fixes the following symptoms:Leaking, No hot or cold water
-
Part# WH13X10053 replaces these:AP5629504, WH13X22314
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts Additional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Wayne from Minneapolis, MN
- Parts Used:
- WH13X10053
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Pliers
Water inlet valve leaked water into tub
The leak was intermittent, and only a drop or two per minute. I figured it wasn't worth repairing -- the leak was minor and the water wasn't even wasted. It became part of the next wash load. But one day there was a couple inches of water in the tub, so I ordered the replacement valve from PartSelect. Repair was easy. First, unplug the wa
... Read more
sher and turn off and disconnect the hoses that supply water to the washer. Watch any video that shows how to remove the top control housing. Once that's tilted out of the way, the valve is easily accessible. Two electrical connectors slide off with a little effort. Two 1/4-in. hex head screws hold it down. A rubber tube is held in place with a spring clip -- you'll need pliers to hold that clip open while you remove the old valve from the tube and insert the new one. Reattach and reconnect everything, and you're done.
Read less
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lee from Fenton, MI
- Parts Used:
- WH13X10053
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
Slow to fill and loud noise when filling.
Removed 3 Sheetmetal screws on top of washer on the back. Removed electrical connections for hot and cold water. Removed two mounting screws, removed hose. Then installed new valve in reverse order. Everything worked perfect problem resolved. Installation was very easy.
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Paul from Edmond, OK
- Parts Used:
- WH13X10053
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
leaky valve . bad design
took out 3 screws to remove top that easy. disconnect wire & install new valve . less than 30min
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX3652834
Manufacturer Part Number: WH13X10053
Manufacturer Part Number: WH13X10053
Brand
Model Number
Description
✖
Mail-In Recycling Rebate