Part Location Diagram of WH2X1198 GE Washer Tub Bearing
See part 309 in the diagram
Replacing your General Electric Washer Washer Tub Bearing
( Grid squares measure 1x1 inch )

Washer Tub Bearing WH2X1198

Works With Model GCAP1000M1WW!

Rated by 3 customers 

?

Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

?
$27.42
In Stock
Fix Number:
FIX271510
Manufacturer #:
WH2X1198
Manufactured by:
GE
Works With Model GCAP1000M1WW!

Product Description

The tub bearing secures the spin basket in the tub assembly of a washer. It is located on the bottom of the outer tub. A common symptom of a worn tub bearing is a very loud noise (including a grinding sound) during the spin cycle. If the washer is also having trouble spinning or agitating, it leaks, or shakes, these are also indications that the tub bearing may need to be replaced. This part is sold individually and is sourced right from the original manufacturer.

Videos For installing this part.

Replacing your Washer Tub Bearing

Replacing your Washer Tub Bearing

Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Thomas
March 30, 2022
how can i tell if the bearing is bad before i take things apart
For model number htwp1000m2www
Fix.com logo
Hello Thomas, Thank you for the question. If you hear a metal-on-metal sound at the bottom of the machine it is more than likely the bearing. I hope this helps and good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 2.5 / 5.0, 3 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Joe from Chillicothe, MO
Parts Used:
WH02X10383, WH02X10265, WH01X10302, WH2X1199, WH2X1198, WH2X1197
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Leaking & very Noisy
Watched the Video took parts off one by one got as far as the nut there there had a problem with it had to soak it in W D 40 then was able to get it off needed to buy a new Nut split ring broke when i took it off but i have ordered the parts a head of time all of the main parts were rusted bearings ,hub washer,so it was a good thing i go t all of the main parts the belt was starting to show wear. got a new one but as for the loud noise I found that the Transmission bearing went bad so ill have to get a new one. The job was not all that hard the nut was the main problem the seal was a bit hard to get off so i the whole tub out of the Machine had it upside down and put a screw driver thru hole and pop it out that way the tub bearing was the same way flip tub over a pop it out from the front when seal was out found it works better that way then the way it shows in the Video put a little liquid of soap around edge of seal it goes on much better Hope all this helps you out
7 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Stephen from Bridgewater, NJ
Parts Used:
WH02X10383, WH38X10017, WH02X10265, WE03X29897, WH01X10302, WH2X1199, WH2X1198, WH2X1197, WE25M40
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
noisy
New shaft, belt and housing. Installation was going fine until went to install belt and IT was way to short .THANKS
5 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Carol from Pitman, PA
Parts Used:
WH45X20473, WH02X10383, WH02X10284, WH02X10265, WH2X1198, WH2X1193
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Socket set
Washer tub seal leak and mode shifter noisy
Disconnect power and water supply hoses, remove back cover and control panel, remove lid switch, then lid. Unsnapped top ring on tub assembly, disconnect pressure tube, disconnect motor control wires, twist and remove center fabric softener cup, removed hex bolt underneath, then removed agitator and drive hub. Used 1 11/16" 3/4 drive sock et with extensions and breaker bar. Used sledge hammer on bar to knock loose left-hand thread aluminum tub nut(quite difficult on a 6 year old washer). Lift stainless tub out and removed split ring and old seal. Tip out plastic tub assembly and turn upside down to remove drive belt, and pulley. Removed all hardware connecting drive assembly to plastic tub and installed new parts. TIP: install tub seal after mode shifter is installed and do not use any gasket sealer or lube as seal will want to push back out. Old tub assembly was replaced due to elongated and cracked tub seal seat.
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX271510
Manufacturer Part Number: WH2X1198
Brand Model Number Description
General Electric 56221B3WW Washer
General Electric 56241B3WW Washer
General Electric 56251B2WW Washer
General Electric 56411D0WW Washer
General Electric 56411D5WW Washer
General Electric 56411DAWW Washer - Ge Washing Machine 56411daww
General Electric 56421D0WW Washer
General Electric 56421D5WW Washer
General Electric 56421DAWW Washer
General Electric 57271B2WW Washer
General Electric 57281B5WW Washer
General Electric 57431D0WW Washer
General Electric 57431D5WW Washer
General Electric 57431DAWW Washer
General Electric 57431DCWW Washer
General Electric 57441D0WW Washer
General Electric 57441D5WW Washer
General Electric 57441DAWW Washer
General Electric 57441DCWW Washer
General Electric 57481D0WW Washer
General Electric 57481D1WW Washer
General Electric 57481DCWW Washer
General Electric 57491D0WW Washer
General Electric 57491D1WW Washer
General Electric 57731H0WW Washer
General Electric 57731H2WW Washer
General Electric 57731H3WW Washer
General Electric 57731H5WW Washer
General Electric 57731H6WW Washer
General Electric 57731H7WW Washer