Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
Start/Stop Button WH01X10088
$18.91
In Stock
- Fix Number:
- FIX268476
- Manufacturer #:
- WH01X10088
- Manufactured by:
- GE
- Product Description
- This is the start/stop button for your washer. If your washer will not start after the button is depressed, you may need to replace it. However, you may also want to check your door switch, because when the washer will not start, the door switch is often the issue. This part is made of rubber and is gray in color. It is a little bigger than 1 inch in diameter and is sold individually.
- Works with the following brands:
- General Electric
- Works with the following products
- Washer
- Fixes the following symptoms
- Will Not Start, Touchpad does not respond
- Part# WH01X10088 replaces these:
- AP3661155, 877584, WH01X10032, WH12X10140, WH1X10032, WH1X10088
Part Number Cross Reference
Product Description
This is the start/stop button for your washer. If your washer will not start after the button is depressed, you may need to replace it. However, you may also want to check your door switch, because when the washer will not start, the door switch is often the issue. This part is made of rubber and is gray in color. It is a little bigger than 1 inch in diameter and is sold individually.
-
Works with the following brands:General Electric
-
Works with the following products:Washer
-
Fixes the following symptoms:Will Not Start, Touchpad does not respond
-
Part# WH01X10088 replaces these:AP3661155, 877584, WH01X10032, WH12X10140, WH1X10032, WH1X10088
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts Additional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- James H from Trenton, NJ
- Parts Used:
- WH12X10271, WH01X10088
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers
wont start
took 4screws out,6five sixteenth screws out.unplueg 3conectors.put back tighter.
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Donald from Herndon, VA
- Parts Used:
- WH01X10088
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
The washer would not start when the start button was depressed..
1. Remove the back panel. On my washer, that involved removing 3 nuts. 2. Remove the circuit board, which involved removing 2 nuts. 3. Remove the old start button and replace with new start button. 4. Reverse above procedure to re-install the circuit board and close up the back panel.
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Cheryl from Pensacola, FL
- Parts Used:
- WH12X10365, WH01X10088
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Medium cycle not functioning fully.
Opened upper control panel, removed defective parts, installed new parts, replaced panel. Be sure the vacuum hose is securely attached. It was that simple!
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- C.W. from NAHUNTA, GA
- Parts Used:
- WH01X10088
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers
washer would not start
removed 4 knobs off control panel, removed 4 hex screws allowing control panel to move forward and down. removed 6 screws to allow circuit board to lift up and popped out old button. replaced new button. cleaned and re-attached.
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX268476
Manufacturer Part Number: WH01X10088
Manufacturer Part Number: WH01X10088
Brand
Model Number
Description
✖
Mail-In Recycling Rebate