Part Location Diagram of WP777533 Whirlpool Trash Compactor Power Nut
See part 7 in the diagram
( Grid squares measure 1x1 inch )

Trash Compactor Power Nut WP777533

Works With Model 6221358550!

Rated by 1 customers 

?

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$58.79
In Stock
Fix Number:
FIX11744741
Manufacturer #:
WP777533
Manufactured by:
Whirlpool
Works With Model 6221358550!

Product Description

This plastic power nut is designed for use in trash compactors, where it plays a key role in the compacting mechanism. Measuring just over an inch in diameter and one inch thick, it threads onto the side of the ram and works in tandem with the power screw to drive the ram downward, compressing waste efficiently. If your compactor’s ram is stuck or fails to stop at the end of its cycle, replacing this component may restore proper operation.

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.8 / 5.0, 1 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Diane from Norton, MA
Parts Used:
WP777533
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
compactor would not compact and come back up to the starting position
First of all I would like to thank this site for the excellent service we received and the young lady I spoke to in customer service was great. Only the right side was bad, but I changed both sides while I was at it. I left the left side in tacked so I could get the right height on the right side to make sure the ram was level. I took of the two nuts and undid the power nut. At this point I cleaned off the screw rod that the power nut attaches to and screw on the new power nut. I had someone hold up the back of the ram to make sure that I had it level and then put on the cap and attached it with the two small screws, and then repeater the same steps for the left side. Tis compactor is thirty six years old and this is the first time I did any repairs to it and I hope it last another thirty six.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX11744741
Manufacturer Part Number: WP777533
Brand Model Number Description
Kenmore 19025 Trash Compactor - Kenmore Trash Compactor Model 19025 (1988) (19025(1988)) Parts
KitchenAid 4KUCC150S0 Trash Compactor
KitchenAid 4KUCC150S1 Trash Compactor
KitchenAid 4KUCC150S2 Trash Compactor
KitchenAid 4KUCC151T0 Trash Compactor
KitchenAid 4KUCC151T1 Trash Compactor
Kenmore 6221338550 Trash Compactor
Kenmore 6221358550 Trash Compactor
Kenmore 6221388550 Trash Compactor
Kenmore 6228369301NZ Trash Compactor
Kenmore 6228415001NO Trash Compactor
Kenmore 6228416001GO Trash Compactor
Kenmore 62284169900 Trash Compactor
Kenmore 6228419001GO Trash Compactor
Kenmore 62284199910 Trash Compactor
Kenmore 62284199920 Trash Compactor
Kenmore 6651330590 Trash Compactor
Kenmore 6651336580 Trash Compactor
Kenmore 6651336581 Trash Compactor
Kenmore 6651336582 Trash Compactor
Kenmore 6651338550 Trash Compactor
Kenmore 6651338580 Trash Compactor
Kenmore 6651338581 Trash Compactor
Kenmore 6651338582 Trash Compactor
Kenmore 6651339580 Trash Compactor
Kenmore 6651339581 Trash Compactor
Kenmore 6651340590 Trash Compactor
Kenmore 6651350190 Trash Compactor
Kenmore 6651350590 Trash Compactor
Kenmore 6651358550 Trash Compactor