Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
Ice Mold WPW10190929
Works With Model 2155188!
$165.60
In Stock
- Fix Number:
- FIX11749915
- Manufacturer #:
- WPW10190929
- Manufactured by:
- Whirlpool
Works With Model 2155188!
- Product Description
- This ice cube mold and heater assembly has a flake resistant surface. It is used with modular style icemakers on some refrigerators.
- Works with the following brands:
- Kenmore, Whirlpool, KitchenAid, Maytag
- Works with the following products
- Refrigerator, Ice Maker
- Fixes the following symptoms
- Leaking, Ice maker not making ice
- Part# WPW10190929 replaces these:
- AP6016623, 14211407, 2255835, 627815, 627997, 628189, 628228, 628315, W10122527, W10190929
Part Number Cross Reference
Product Description
This ice cube mold and heater assembly has a flake resistant surface. It is used with modular style icemakers on some refrigerators.
-
Works with the following brands:Kenmore, Whirlpool, KitchenAid, Maytag
-
Works with the following products:Refrigerator, Ice Maker
-
Fixes the following symptoms:Leaking, Ice maker not making ice
-
Part# WPW10190929 replaces these:AP6016623, 14211407, 2255835, 627815, 627997, 628189 ... Show more , 628228, 628315, W10122527, W10190929 Show less
Videos For installing this part.
Replacing your Ice Mold
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts Additional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- lisa from Clemmons, NC
- Parts Used:
- WPW10190929
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Screw drivers, Wrench (Adjustable)
Icemaker leaking water when water filling tray
Icemaker was leaking; read other repair scenarios and determined (hoped) the cause of the leak may have been the seal eroding around the heating coil, therefore tried replacing that piece of the Icemaker. I ordered the part from and followed the EXTREMELY helpful video on YouTube provided by this site and the part replacement was successf
... Read more
ul and the Icemaker no longer leaks and is working perfectly. Thank you so much for saving me tons of money!!
Read less
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gilbert from Fayetteville, TX
- Parts Used:
- WPW10190929
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers
Ice mold leaked
Followed instructions from the website
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Charles from Mesa, AZ
- Parts Used:
- W10297244, WPW10190929
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Screw drivers, Socket set
Ice maker leaking water onto items in freezer
The most difficult was removing ice from tray under ice maker. After getting the ice out of the way it was just a case of sliding the entire unit off the mount. The power connector and mounting bolts were removed and the unit was disassembled. Then the new parts were assembled and the unit was slid back in place. Reinstall mounting bolts
... Read more
and connect power connector. The new ice mold needed a careful washing. before assembly.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Rodney from Spicewood, TX
- Parts Used:
- WPW10190929
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Ice Mold
Disassembled the ice maker, cleared all the components. The ice mold was corroded and the finish was coming of into the ice as well as leaking (forming icicles in the freezer). There is no need to turn off the water for this procedure. The primary tool for this is a phillips head screw driver, slender, in order to fit the depth on the bot
... Read more
tom. Remove the side (gear/motor) cover and remove that from the ice mold. Then remove the base housing from the old mold. Again once this done, clean your parts, then ensure that the contact points on the motor are clean and apply contact grease for cold temps to them. Now insert the new mold into the motor and reassemble.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from Chuluota, FL
- Parts Used:
- WPW10190929, EDR5RXD1, WP627985
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
No ice...
Removed the icemaker....one screw on lower right, two rail clips on right and left, and electrical connector. Removed the bottom cover (two screws?). Disengaged the electrical connector. Separated the timer assembly from the ice mold (three screws through the timer assembly into the ice mold). Found one of the two ice mold heater electric
... Read more
al connections with the rubber attached had corroded and separated requiring ice mold replacement. Replaced ice mold with new "plumbers putty" around connections. As a "while I have it apart" fix...replaced the thermostat. Re-assembled.
Read less
0 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
★
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Marlon E - December 31, 2020
Verified Purchase
works well
the part is working just fine i would recommend your site for part purchases to all my family and friends. The only problem i had was the person dropping off the part just threw my purchase out of the truck in our driveway got a little bend on the gold color rod but i was able to fix it
Model Compatibility
This part works with the following models:
Fix Number: FIX11749915
Manufacturer Part Number: WPW10190929
Manufacturer Part Number: WPW10190929
Brand
Model Number
Description
✖
Mail-In Recycling Rebate