Part Location Diagram of 814103 Whirlpool Range Surface Burner Stabilizer Clip Kit
See part 13 in the diagram
( Grid squares measure 1x1 inch )

Range Surface Burner Stabilizer Clip Kit 814103

Works With Model 4RF302BXDW0!

Rated by 2 customers 

?

Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

?
$11.76
In Stock
Fix Number:
FIX389114
Manufacturer #:
814103
Manufactured by:
Whirlpool
Works With Model 4RF302BXDW0!

Product Description

This kit contains one clip, a screw, and a nut.

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.5 / 5.0, 2 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Edward from Atlanta, MI
Parts Used:
814103
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Wrench set
Surface Burner Stabilizer Clip broken off
Carefully ground the head of the rivet off and removed the remaining clip base. Removed all surface burners and their respective pans, and lifted range top up until the supports were latched. Fiddled with the new clip and screw until they were properly aligned, with the screw head out. Attached nut to screw from the inside and tightened e verything up. Access to tweezers and small wrenches a must.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Reed from Winthrop, ME
Parts Used:
814103
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
A stabilizer clip had broken on the range, and the burner element was not being held in place.
I ground off the head of the rivet holding the old broken clip, and used a punch to drive the rivet out of the stove top. Then I just bolted in the new part. The new part is slightly wider than the old clip, so I had to use the Dremel grinder to slightly widen the opening in the burner pan so that the pan would fit properly. It was obviou s what needed to be done.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX389114
Manufacturer Part Number: 814103
Brand Model Number Description
Whirlpool 4RF302BXDW0 Range - Freestanding, Electric
Whirlpool 4RF310PXDQ0 Range - Electric
Whirlpool 4RF315PXDQ0 Range - Freestanding, Electric
Whirlpool 4RF315PXDW0 Range - Freestanding, Electric
Kenmore 664RF3020XYN1 Range
Kenmore 664RF3020XYN2 Range
Kenmore 664RF3020XYW0 Range
Kenmore 664RF3020XYW1 Range
Kenmore 664RF3020XYW2 Range
Roper FEC330BL0 Range - Freestanding 30" Electric, Conventional
Roper FEC330BW0 Range - Freestanding 30" Electric, Conventional
Roper FEP310BL0 Range - Freestanding 30" Electric, Conventional
Roper FEP310BL1 Range - Freestanding 30" Electric, Conventional
Roper FEP310BW0 Range - Freestanding 30" Electric, Conventional
Roper FEP310BW1 Range - Freestanding 30" Electric, Conventional
Whirlpool FEP310YL0 Range
Whirlpool FEP310YL1 Range
Whirlpool FEP310YL2 Range
Roper FEP310YW0 Range - Electric
Roper FEP310YW1 Range - Electric
Roper FEP310YW2 Range - Electric
Roper FEP320BL0 Range - Freestanding, Electric
Roper FEP320BL1 Range - Freestanding, Electric
Roper FEP320BW0 Range - Freestanding, Electric
Roper FEP320BW1 Range - Freestanding, Electric
Whirlpool FEP320YL0 Range
Whirlpool FEP320YL1 Range
Whirlpool FEP320YL2 Range
Roper FEP320YW0 Range - Freestanding, Electric
Roper FEP320YW1 Range - Freestanding, Electric