Watch the install video
1528543-1-M-Frigidaire-316490001 -Oven Temperature Sensor
Part Location Diagram of 316490001 Frigidaire Oven Temperature Sensor
See part F37 in the diagram
Replacing your Kenmore Range Oven Temperature Sensor
1528543-1-S-Frigidaire-316490001 -Oven Temperature Sensor 360 view
( Grid squares measure 1x1 inch )
1528543-1-S-Frigidaire-316490001 -Oven Temperature Sensor 1528543-2-S-Frigidaire-316490001 -Oven Temperature Sensor 1528543-1-S-Frigidaire-316490001 -Oven Temperature Sensor 360 view
Part Location Diagram of 316490001 Frigidaire Oven Temperature Sensor Replacing your Kenmore Range Oven Temperature Sensor

Oven Temperature Sensor 316490001

Works With Model CGLEF379DBH!

Rated by 7 customers 

?

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$56.22
In Stock
Fix Number:
FIX1528543
Manufacturer #:
316490001
Manufactured by:
Frigidaire
Works With Model CGLEF379DBH!

Jump to:

Product Description

This temperature sensor detects the temperature within the oven cavity.

  • Works with the following brands:
    Kenmore, Frigidaire, Electrolux, Tappan
  • Works with the following products:
    Range, Wall Oven
  • Fixes the following symptoms:
    Little to no heat when baking, Oven is too hot, Oven not heating evenly, Will Not Start
  • Part# 316490001 replaces these:
    AP3969435, 1259650, 316490001, 316134901, 316217001, 316217003 , 7316490001 Show less
Works with the following brands:
Kenmore, Frigidaire, Electrolux, Tappan
Works with the following products
Range, Wall Oven
Fixes the following symptoms
Little to no heat when baking, Oven is too hot, Oven not heating evenly, Will Not Start
Part Number Cross Reference
Part# 316490001 replaces these:
AP3969435, 1259650, 316490001, 316134901, 316217001, 316217003, 7316490001

Videos For installing this part.

Replacing your Oven Temperature Sensor

Replacing your Oven Temperature Sensor

Questions and Answers

Be the first to ask our experts a question about this part!

Washer Affresh Cleaner
$19.89
In Stock
Part Number: FIX1960673
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Cleaner
$24.88
In Stock
Part Number: FIX12346712
This cooktop cleaning kit includes a scraper and scrub pad that remove build-up and cooked-on spills without scratching or harming your cooktop surfaces and a non-abrasive cleaner that is safe for all glass and ceramic c...
Appliance Cleaner
$23.93
In Stock
Part Number: FIX16227489
This cleaner is ideal for ventilation, microwaves, cooktops, refrigeration, and stainless steel surfaces. It easily removes burnt-on debris and greasy residues. Can be used on kitchen cabinets, countertops, tile and stee...
Affresh Dishwasher Cleaner Tablets - 6
$21.89
In Stock
Part Number: FIX12345667
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Scratch B Gone Stainless Steel Scratch Remover Kit
$90.57
In Stock
Part Number: FIX2340672
This product permanently removes scratches, stains and rust from all brushed surfaces on stainless steel appliances, grills, sinks and more. This is for use on true stainless steel products only
Stainless Steel Cleaner
$25.88
In Stock
Part Number: FIX12717775
Our scratch-free, streak-free formula removes fingerprints, smudges, grease, dirt and oil, while protecting and polishing to repel dust and dirt. Use on all stainless steel appliance brands and surfaces. Stainless Steel ...

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.9 / 5.0, 7 reviews.
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Rick E from BOYNTON BEACH, FL
Parts Used:
316490001
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers
Intermittent F-30 error.
Pull Oven away from wall and disconnect power.
Remove back panel for access to sensor and wiring/connector.
Disconnect sensor connector.
Remove old sensor and insert new one into place.
If the connector does not match (as mine didn't), cut and strip sensor wires and connect to service wires with heat resistant wire nut s.
Secure wiring appropriately and replace back panel.
Connect power and re-position oven.
Read less
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Berry from denver, NC
Parts Used:
316490001
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
oven was over heating
Ture power off pull stove out from the wall remove the screws from back panel with a 1/4 inch nutdriver unplug sensor remove the screw pull sensor out and slide the new one in and reverse the process.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gerald from Winthrop, WA
Parts Used:
316490001
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
old temp stove wire had previously been cut by previous owner
removed the double oven and spliced the wires
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kenneth from Drake, ND
Parts Used:
316490001
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
no oven temp control
removed rear panel unplugged sensor removed mounting screw replaced sensor.20 minutes!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Monty from Kings Mountain, NC
Parts Used:
316490001
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Run away temperature
Pulled range out which needed to be cleaned behind anyway...disconnected power cord from outlet...removed rear panel from stove to access part.....disconnected plug from old part simple disconnect...removed old part replaced with new...new part wasn't same simple plug as new...spliced old disconnect to new part simple as that replaced ove n rear panel plugged power back in working great so far and did a much needed cleaning behind stove
Read less
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from Perryton, TX
Parts Used:
316490001
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
oven overheating and would not turn off w/o unplugging it
This repair can be done much quicker and easier than I did it. I started out by removing trim to get to the control board. This was not necessary. First i pulled the oven door. Remove 2 screws and keepers above hinges, set door to broil position and lift up. Door will pull up and off. With this out of the way, find 4 screws on outter edge that hold oven to the wall. Dont confuse these with the screws that look the same as the ones you pull to remove the door, these screws have a smaller head and are closer to the outside. Once these screws are removed, find a helper, and with one person on each side, pull the oven out of the wall. It will be helpful if you have a table or sawhorses prepared to sit the oven on. Once the oven is removed from the wall, look inside the oven & find the old temp sensor (mine was in top left hand corner). Remove the 2 screws that hold it in place. Now go to back of oven and trace the wires coming from the temp sensor to where it plugs in. Remove old sensor, but do not discard ! In my case (as many others). I had to cut the old plug off and solder it on the new sensor. I used heat shrink to cover solder splice. Replace oven and door in reverse order of removing. Fixed my oven for $25-$30 verses spending $900 for a new one !
Read less
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dwight from Clinton, MD
Parts Used:
316490001
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
oven not reaching proper temperature
Ordered Oven Temperature Sensor, unplug oven from power source remove back panel with nut driver. Splice wires from new part and had to splice wires coming from stove. Install with wire nuts and replace oven sensor reinstall back panel and plug oven into power source, tested oven with oven temperature gauge, oven works fine. Easy to repai r.
Read less
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX1528543
Manufacturer Part Number: 316490001
Brand Model Number Description
Kenmore 5995408571 Range - Kenmore Range/Stove/Oven 5995408571
Kenmore 79015032500 Wall Oven
Kenmore 79046814991 Range - Kenmore Range/Stove/Oven Model 790.46814991 (79046814991, 790 46814991) Parts
Kenmore 79046819991 Range - Kenmore Range/Stove/Oven Model 790.46819991 (79046819991, 790 46819991) Parts
Kenmore 79078510400 Range
Kenmore 79078510401 Range
Kenmore 79078510403 Range
Kenmore 79078510404 Range
Kenmore 79078511400 Range
Kenmore 79078511401 Range
Kenmore 79078511403 Range
Kenmore 79078511404 Range
Kenmore 79078520400 Range
Kenmore 79078520401 Range
Kenmore 79078520403 Range
Kenmore 79078520404 Range
Kenmore 79078521400 Range
Kenmore 79078521401 Range
Kenmore 79078521403 Range
Kenmore 79078521404 Range
Kenmore 79078530400 Range
Kenmore 79078530600 Range
Kenmore 79078531400 Range
Kenmore 79078531600 Range
Kenmore 79078540600 Range
Kenmore 79078541600 Range
Kenmore 79078572400 Range
Kenmore 79078572401 Range
Kenmore 79078572404 Range
Kenmore 79078572405 Range
Oven Temperature Sensor
$ 56.22
  In Stock
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.