249284-1-M-GE-WB44T10009 -Range Broil Element
Part Location Diagram of WB44T10009 GE Range Broil Element
See part 252 in the diagram
249284-1-S-GE-WB44T10009 -Range Broil Element 360 view
( Grid squares measure 1x1 inch )
249284-1-S-GE-WB44T10009 -Range Broil Element 249284-2-S-GE-WB44T10009 -Range Broil Element 249284-3-S-GE-WB44T10009 -Range Broil Element 249284-1-S-GE-WB44T10009 -Range Broil Element 360 view
Part Location Diagram of WB44T10009 GE Range Broil Element

Range Broil Element WB44T10009

Works With Model JB620DR4WW!

Rated by 3 customers 

?

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$75.48
In Stock
Fix Number:
FIX249284
Manufacturer #:
WB44T10009
Manufactured by:
GE
Works With Model JB620DR4WW!

Jump to:

Product Description

This broil element is found on the upper part of the oven cavity.

  • Works with the following brands:
    General Electric, Kenmore
  • Works with the following products:
    Range
  • Fixes the following symptoms:
    Little to no heat when broiling, Element will not heat, Little to no heat when baking, Oven not heating evenly
  • Part# WB44T10009 replaces these:
    AP2030995, 770548, WB44T10009, WB44T10034
Works with the following brands:
General Electric, Kenmore
Works with the following products
Range
Fixes the following symptoms
Little to no heat when broiling, Element will not heat, Little to no heat when baking, Oven not heating evenly
Part Number Cross Reference
Part# WB44T10009 replaces these:
AP2030995, 770548, WB44T10009, WB44T10034

Questions and Answers

Be the first to ask our experts a question about this part!

Washer Affresh Cleaner
$12.54
In Stock
Part Number: FIX1960673
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Cleaner
$18.43
In Stock
Part Number: FIX12346712
This cooktop cleaning kit includes a scraper and scrub pad that remove build-up and cooked-on spills without scratching or harming your cooktop surfaces and a non-abrasive cleaner that is safe for all glass and ceramic c...
Appliance Cleaner
$23.93
In Stock
Part Number: FIX16227489
This cleaner is ideal for ventilation, microwaves, cooktops, refrigeration, and stainless steel surfaces. It easily removes burnt-on debris and greasy residues. Can be used on kitchen cabinets, countertops, tile and stee...
Affresh Dishwasher Cleaner Tablets - 6
$19.04
In Stock
Part Number: FIX12345667
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Scratch B Gone Stainless Steel Scratch Remover Kit
$126.64
In Stock
Part Number: FIX2340672
This product permanently removes scratches, stains and rust from all brushed surfaces on stainless steel appliances, grills, sinks and more. This is for use on true stainless steel products only
Stainless Steel Cleaner
$15.56
In Stock
Part Number: FIX12717775
Our scratch-free, streak-free formula removes fingerprints, smudges, grease, dirt and oil, while protecting and polishing to repel dust and dirt. Use on all stainless steel appliance brands and surfaces. Stainless Steel ...

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.6 / 5.0, 3 reviews.
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
william from Creal Springs, IL
Parts Used:
WB44T10009
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Heating element broke in half and was sparking.
Disconnected power to the range. Removed the two nut screws in the rear. Pulled the heating element forward until the wire connectors were exposed. Detached the clips from wires and element. Removed old element. Reconnected wire connectors to new element and reinserted into back of range. Tightened two rear screws. Turned power bac k on and tested.
Read less
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Lucinda from Ada, OH
Parts Used:
WB44T10009
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Broiler element burnt out
Pretty easy to remove old old and install new element
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Christopher from Chicago, IL
Parts Used:
WB44T10009
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
Broiler Element Replacement
This is usually a very easy replacement, but I did have one complication that was not noted by others. The spade connectors (the power connectors) to the broiler element were loose and needed to be crimped. The procedures I used were: 1) Confirm that the range is disconnected from power. I did this by turning off the circuit breaker for the range. You could also unplug it. 2) Remove the oven racks. 3) Remove the two front bolts fastening the broiler element to the top of the oven. I used a nut driver to the remove the bolts. 3) Remove the three rear bolts fastening the broiler element to the back of the oven. The center bolt fastens the temperature sensor in place. Make note that the temp sensor bolt is a different size than the bolts fastening the broiler element. 4) While holding the electrical connectors in place, pull the element and wires out about six inches. 5) Wrap a twist tie around the two wires going to the broiler element, so they don't fall back into the oven. If the they fall back into the oven, you will have to remove the back of the oven and feed them back in. 6) Remove the spade connectors from the from the broiler element. You can now remove the element from the oven. 7) Reconnect the spade connectors to the new broiler element. Spade connectors stay fastened based on friction. The connectors in my oven were loose and kept falling off. If this happens, you need to lightly crimp the curled edges of the connector with pliers. BE CAREFUL! If you crimp the connector too much, it won't slide on to the broiler element. If this happens you will need to slide a small screwdriver to into the spade connector to pry it apart slightly. This is normally an easy operation, but with the oven door in the way, it is hard to get two hands on the the connector. I had to do it with one hand which took a few repetitions. 8) Feed the wires back into the oven 9) Hold the element in place and screw in both rear bolts by hand. It is important to leave them loose in order to leave wiggle room to get the temp sensor bolt in. 10)Screw in the front two bolts by hand 11) Screw in the temp sensor bolt by hand 12) Tighten all bolts with a nut driver or socket wrench. 13) Reconnect power to the oven and test.
Read less
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX249284
Manufacturer Part Number: WB44T10009
Brand Model Number Description
Kenmore 91192090300 Range
Kenmore 91192090301 Range
Kenmore 91192091300 Range
Kenmore 91192091301 Range
Kenmore 91192401990 Range
Kenmore 91192401991 Range
Kenmore 91192401992 Range
Kenmore 91192408990 Range
Kenmore 91192408991 Range
Kenmore 91192408992 Range
Kenmore 91192481990 Range
Kenmore 91192481991 Range
Kenmore 91192481992 Range
Kenmore 91192488990 Range
Kenmore 91192488991 Range
Kenmore 91192488992 Range
Kenmore 91192502990 Range
Kenmore 91192502991 Range
Kenmore 91192502992 Range
Kenmore 9119250799 Range - Kenmore Range/Stove/Oven Model 911.9250799 (9119250799, 911 9250799) Parts
Kenmore 91192507990 Range
Kenmore 91192507991 Range
Kenmore 91192507992 Range
Kenmore 91192712020 Range
Kenmore 91192714020 Range
Kenmore 91192812300 Range
Kenmore 91192812301 Range
Kenmore 91192814300 Range
Kenmore 91192814301 Range
Kenmore 91193090300 Range
Range Broil Element
$ 75.48
  In Stock
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.