Pressure Washer Parts

Start With Your Model Number

Need help finding your model number?
Find Parts Fast
Guaranteed Fit
Repair Videos
Fix.com search
Shop By Brand Shop By Part Type

Popular Pressure Washer Parts

Male Adapter – Part Number: 9.134-019.0
Male Adapter
$4.99
In Stock
Fix Number
FIX10020893
Manufacturer Part Number
9.134-019.0
This is a genuine male adaptor, sold individually. This male adaptor attaches to the female hose connector on your pressure washer. This black plastic adaptor is located inside the hose connector and fastens it to the pump, allowing the connector to rotate. As you use your pressure washer, the adaptor can begin to wear and can eventually break. This is a quick and easy repair, that begins by removing the inlet filter from the hose connector, then use a hex socket to remove the male adaptor and the O-ring. Install the O-ring onto the male adaptor and connect the male adaptor into the female connector. This assembly can now be installed onto the pump, and the inlet filter can be re-installed.
Grooved Ring – Part Number: 6.365-394.0
Grooved Ring
$6.19
In Stock
Fix Number
FIX9984415
Manufacturer Part Number
6.365-394.0
This is a grooved ring, installed on the pump piston. It is sold individually and sourced right from the original manufacturer, ensuring the proper fit for your pressure washer. The function of this part is to be a seal to prevent the oil in the reservoir and the water in the pump from contaminating each other. The groove ring is known to wear over the use of your equipment and this can cause a decrease in pressure and water leakage.
Grooved Ring 12 X 20 X 4 – Part Number: 6.365-393.0
Grooved Ring 12 X 20 X 4
$5.49
In Stock
Fix Number
FIX9984414
Manufacturer Part Number
6.365-393.0
Spill Valve – Part Number: 4.591-040.0
Spill Valve
$20.68
In Stock
★★★★★
★★★★★
2 Reviews
Fix Number
FIX9949597
Manufacturer Part Number
4.591-040.0
This spill valve is for pressure washers. Spill valve opens when water flowing through the pump gets too hot, releasing the hot water in exchange for cooler water.
Fixes these symptoms

Installation Instructions

steve from white, GA
no pressure
removed pump from motor replaced spill valve Read more...
Detergent Suction Kit – Part Number: 308452002
Detergent Suction Kit
$5.19
In Stock
Fix Number
FIX9938134
Manufacturer Part Number
308452002
This is an OEM detergent suction kit, also referred to as a chemical injection kit, for a pressure washer. This kit is threaded into the pump assembly and is connected to the chemical siphon tube that is located in a container that holds the cleaner. This kit includes, (1) bronze nozzle, (1) large O-ring, (1) small O-ring, (1) steel ball, (1) spring (5 components total). For this repair, use a pair of pliers to grasp the detergent supply tube and remove the tube from the chemical injector. Remove the old injector with a wrench. To prepare the kit, start by placing the O-rings on the bronzed nozzle, then the steel ball, then the spring. Apply lubricant on the large O-ring and then thread it back into the port.
Fixes these symptoms
Valve (Sold Individually) – Part Number: 4.580-330.0
Valve (Sold Individually)
$9.28
In Stock
Fix Number
FIX9949583
Manufacturer Part Number
4.580-330.0
This part includes one pump check valve for use with pressure washers. The pump check valve and the piston regulate the flow of water through the pump assembly. It is common for the part to wear out over time, so it should be part of your regular inspection check-list. If you use your pressure washer quite a bit, we recommend having one of these on hand in your tool box.
Wheel – Part Number: 308451067
Wheel
$13.47
Special Order
Fix Number
FIX16324400
Manufacturer Part Number
308451067
Spray Wand – Part Number: 308494075
Spray Wand
$12.40
Special Order
Fix Number
FIX12090574
Manufacturer Part Number
308494075
This is an OEM spray wand for a pressure washer, sold individually. The spray wand attaches to the trigger handle, and the nozzle attaches to the end of the spray wand. It has a fitting size of 1/4-inches. The most common reason for replacing the spray wand is when water is leaking from it. There are a few common causes of a leaky wand, including a damaged O-ring, where it attaches to the trigger handle, or a damaged O-ring or coupler where the nozzle is attached. There also may be a crack in the plastic housing. This is a simple replacement that does not requiring any tools.
High Pressure Hose – Part Number: 308835065
High Pressure Hose
$24.55
Special Order
★★★★★
★★★★★
2 Reviews
Fix Number
FIX9938515
Manufacturer Part Number
308835065
This is an OEM quality high pressure hose for a pressure washer. It is constructed with a durable rubber/plastic material and measures 25-feet long. It has a 6-mm braid and produces a 1700 PSI. The high pressure hose connects to the trigger handle on one end and the pump on the other. This high pressure hose consists of an outer covering which provides strength to the hose. If this outer covering becomes damaged, it needs to be replaced immediately. A kinked or broken hose can produce a high pressure leak, which can be dangerous, so please replace this hose as soon as leaks or damage are noted.
Fixes these symptoms
Fuel Valve W/Bushing – Part Number: 192980GS
Fuel Valve W/Bushing
$19.31
In Stock
Fix Number
FIX8911051
Manufacturer Part Number
192980GS
This fuel valve with bushing fits a variety of outdoor equipment and allows the fuel to smoothly flow into the gas engine. The bushing part is pressed into the hole provided in the fuel tank and the fuel valve is pressed through the bushing to reach the inside of the fuel tank. If your fuel valve is broken then it best to replace it. Refer to the manual provided by the manufacterer for more information on the part and installation instructions. Safety tip: remember to wear gloves and be cautious when removing fuel from the tank.
Fixes these symptoms

Pressure Washer Brands

Related Pressure Washer Parts

Popular Pressure Washer Models

View More
+