Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
Brush (Sold Individually) 1313113
- Fix Number:
- FIX10106168
- Manufacturer #:
- 1313113
- Manufactured by:
- Porter Cable
- Product Description
- This is a carbon brush set for your power tools, most commonly your planer jointer. Two of these brushes are needed for most power tools, and this purchase only includes one. If you are having troubles with electric braking, or motor functions, you should replace your carbon brushes. We recommend replacing both brushes together, to create an even wear. This is a part that is replaced often in power tools because of the constant friction during operation. When making this installation we recommend inspecting the armature for visible damage that could prove larger motor issues.
- Works with the following brands:
- Delta, Porter Cable
- Works with the following products
- Planer Jointer, Table Saw
Product Description
This is a carbon brush set for your power tools, most commonly your planer jointer. Two of these brushes are needed for most power tools, and this purchase only includes one. If you are having troubles with electric braking, or motor functions, you should replace your carbon brushes. We recommend replacing both brushes together, to create an even wear. This is a part that is replaced often in power tools because of the constant friction during operation. When making this installation we recommend inspecting the armature for visible damage that could prove larger motor issues.
-
Works with the following brands:Delta, Porter Cable
-
Works with the following products:Planer Jointer, Table Saw
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts Additional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
2) found 7-step instruction in user manual - worked perfectly (Part# 901608 (014) downloaded PDF) on page 26
Turned saw over and layed on two 2x8s to protect spindle and it case I dropped the saw. Use a helper if you have ... Read more one but I did not need one.
3) inspected motor brushes per user manual (had spares ready) 4-step instructions (two brushes) on page 25
4) used stiff brush to clean parts and screw shafts while saw was upside down
5) re-assembled, tested saw, double verified that blade tilt was still at Zero degrees when return to 0 and fense and blade were still parallel.
Cleaning and testing took as long as changing the belt and inspecting brushes.
- < Prev
- 1
- Next >
Model Compatibility
Manufacturer Part Number: 1313113