Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
Retaining Ring WP9703438
Works With Model LSE7806ADE!
$7.87
In Stock
- Fix Number:
- FIX11746909
- Manufacturer #:
- WP9703438
- Manufactured by:
- Whirlpool
Works With Model LSE7806ADE!
- Product Description
- Sometimes referred to as a retaining clip, the retaining ring is used to hold the drum support roller onto the shaft in your dryer. The clip may need to be replaced if you find that your dryer is noisy while tumbling or will not tumble at all. The retaining clip can also be used with stand mixers, to hold the pinion gear to the agitator shaft. This genuine OEM part is made entirely out of metal and measures approximately half an inch in diameter.
- Works with the following brands:
- Maytag, KitchenAid, Whirlpool, Norge
- Works with the following products
- Mixer, Dryer, Refrigerator, Washer Dryer Combo
- Fixes the following symptoms
- Noisy
- Part# WP9703438 replaces these:
- AP6013682, 4-10233, 410233, 4176072, 65100-1, 9703438, WP9703438VP
Part Number Cross Reference
Product Description
Sometimes referred to as a retaining clip, the retaining ring is used to hold the drum support roller onto the shaft in your dryer. The clip may need to be replaced if you find that your dryer is noisy while tumbling or will not tumble at all. The retaining clip can also be used with stand mixers, to hold the pinion gear to the agitator shaft. This genuine OEM part is made entirely out of metal and measures approximately half an inch in diameter.
-
Works with the following brands:Maytag, KitchenAid, Whirlpool, Norge
-
Works with the following products:Mixer, Dryer, Refrigerator, Washer Dryer Combo
-
Fixes the following symptoms:Noisy
-
Part# WP9703438 replaces these:AP6013682, 4-10233, 410233, 4176072, 65100-1, 9703438 ... Show more , WP9703438VP Show less
Videos For installing this part.
Replacing your Retaining Ring
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts Additional or alternate parts to consider.
View More
View Less
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Brian from Novi, MI
- Parts Used:
- WP6-3129480, WP6-3037050, WPY312959, WPY312527, 306508, 12001541, WP9703438, WP354987
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers, Socket set
Squeaking noises while running dryer
Followed the Video Directions from website. All went as planed. The dryer is running like new now.
13 of 14 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Tim from PORTLAND, OR
- Parts Used:
- WP6-3700340, WP6-3129480, WP33002535, 306508, 12001541, WP9703438
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver, Pliers, Screw drivers
Dryer was a bit noisy with a full load of wet clothes
As per the repair videos on the site, I searched the internet for a couple of supplementary videos just to make sure I was doing it correctly. It was was all pretty easy. Expect to vacuum out and clean out the interior of the dryer. Also, to make things easier, disconnect the bulkhead and exterior like in the video, but also keep the top
... Read more
flipped up until reassembling, it'll make it much easier. When reinstalling the belt, remember how the belt is going to go around the pulley, you'll have to do this without sight as the barrel will the way and you won't be able to see what you're doing. It's really not hard but just keep this in mind. Also, as you disassembling, it would help to snap some pictures of where each screw goes and how; reassembly was a tiny bit tricky as I didn't do this.
Read less
8 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The mixer would not spin.
Took the cover off of the transmission and replaced gears, pin and gasket and added new grease.
7 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from Myrtle Beach, SC
- Parts Used:
- WP22002263, 12001541, WP9703438
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Dryer would squeek loudly
Removed door, and front bezel. Write the colors of the wires next to the door switch and the moisture sensor on the bezel so that you can remove the wires, this makes it easier. Lifted top up and pulled drum out, but did not remove belt. Inspected wheels and roller shaft. Needed to replace (2) Roller Wheels, (1) Roller Shaft, (2) Retainin
... Read more
g Rings, & (2) Shaft Washers. Ordered parts from the site. Removed the Retaining rings. The retaining ring tool I bought from the hardware store did not fit the holes in the retaining ring, so I had to file the tips down. Once the retaining rings are removed, the washers and rollers come off easily. The Roller Shaft can be removed by loosening the nut on the back side of the shaft. Inserted new shaft and tightened nut, then replaced both rollers, and washers, and reinstalled the Retaining rings. Put drum back in place, tied all wires back in and reinstalled front bezel and door.
Read less
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Zephyr, TX
- Parts Used:
- WP33002535, 33001917A, 12001541, WP9703438
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Pliers, Screw drivers
The roller bearings worn out causing belt to break
First thing was to watch this video on Youtube on the take down of this dryer and determine what caused the malfunction.
3 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Blower wheel slipping on shaft
watched a Youtube video how to open the dryer, located the problem, ordered parts, replaced, closed up the machine and drank a beer.
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from MOGADORE, OH
- Parts Used:
- WP9703438, WP33002535, 33001790
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Pliers, Screw drivers, Socket set
The blower wheel was deteriorating around the axle
Step 1. I disconnected the electrical outlet Step 2. Took the front panel then the door and then the panel that holds the tumbler. Took the belt off the tumbler then the tumbler. Took the housing cover for the blower wheel off. Took the clip off the blower wheel to the axle of the motor. Replaced with new blower wheel and belt and cl
... Read more
eaned the inside of the dryer.
Read less
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Makes Noise
Remove 2 screws under front Panel and take the front panel out. Then remove 4 screws and then remove the support drum panel out. Remove old blower. and replace the new one. Continue with reverse above steps.
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- RONALD from PHILIPSBURG, PA
- Parts Used:
- WP33002535, WP33001807, 33001790, WP33001789, WP9703438
- Difficulty Level:
- Easy
- Total Repair Time:
- More than 2 hours
- Tools:
- Nutdriver, Pliers, Screw drivers
Broken fan blade destroyed housing
I found an instruction video that explained the steps.It did not explain how to replace the rear seal or felt.After i replace the front felt following the video it was simple.Getting the felt to form or fit the drum was not shown .I put the drum next to the felt and used the cotter key puller to flip the seal to the correct position.
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ken from Middletown, PA
- Parts Used:
- WP33002535, WP33001807, 306508, 12001541, WP9703438
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver, Screw drivers, Socket set
dryer runs noisy
The only additional step I incorporated was to place a block of wood under the tension pulley arm to hold it in the full off position while installing the drive belt. This was very helpful especially since you are working by feel while threading the drive belt onto the motor pulley and tension pulley. Once they are in place the wood block
... Read more
can be removed to engage the tension pulley. The instruction videos brought out a couple of helpful tips that made the repair successful.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX11746909
Manufacturer Part Number: WP9703438
Manufacturer Part Number: WP9703438
Brand
Model Number
Description
✖
Mail-In Recycling Rebate