Trimmer Parts

Popular Trimmer Parts

Fix Number
FIX9285148
Manufacturer Part Number
530095646
This Genuine OEM fuel filter is designed to maintain the performance and longevity of your equipment by preventing dirt and debris from entering the carburetor. Located inside the fuel tank, this essential component ensures clean fuel delivery, protecting the engine from potential damage caused by contaminants. Sold individually, the filter is built to meet original equipment standards for fit and function. Over time, the filter may become clogged, restricting fuel flow and making engine starts more difficult. For optimal performance, it should be replaced—not cleaned—at the first sign of blockage or wear.
Fixes these symptoms
  • Engine stops after a few seconds or minutes
  • Will Not Start
  • See more...
Chainsaw Fuel Line
$9.93
Special Order
★★★★★
★★★★★
1 Review
Fix Number
FIX9472280
Manufacturer Part Number
530069247
This chainsaw fuel line kit carries fuel from the tank into the carburetor and from the primer bulb to the fuel system. This part is mostly used on gas trimmers and blowers. The fuel lines are made from clear, flexible, and rubber material. In time, this part can begin to deteriorate, which can result in leaks. To prevent this, make sure to replace the fuel line. As a safety precaution, remember to wear work gloves to protect your hands during repair.
Fixes these symptoms
  • Engine stops after a few seconds or minutes
  • Will Not Start
  • See more...

Installation Instructions

Larry from Sanford, NC
fuel line is very tight going on
Using forceps, hold tight grip on fuel line about only 1/8 of an inch back of end and lube lightly. Push slowly and work onto nipple. Read more...
Height Guide Assembly Metric
$19.00
On Order
Fix Number
FIX16666196
Manufacturer Part Number
144-4805
Terminal (Lxrh01)
$5.95
In Stock
Fix Number
FIX10153448
Manufacturer Part Number
644808-8
Chainsaw Purge Line
$8.98
Special Order
Fix Number
FIX9472264
Manufacturer Part Number
530069216
This is a tank purge line, also known as a fuel line kit, and it is used with various lawn equipment. The line connects fuel from the tank into the carburetor, and from the primer bulb back into the fuel system. The extra fuel is forced through the line into the fuel tank. This tube is transparent, and has a diameter of 3/16 inches. Before making this repair, we recommend draining the fuel from your machine, and removing the spark plug.
Fixes these symptoms
  • Engine stops after a few seconds or minutes
  • Will Not Start
  • See more...
Trimmer Cover
$6.19
In Stock
★★★★★
★★★★★
2 Reviews
Fix Number
FIX12443187
Manufacturer Part Number
385022-03N
This is an OEM replacement cover for a string trimmer or edger. The cover holds the spool and line securely inside the spool housing. If this part has cracked or damaged, it will need to be replaced. When removing this part, make sure the trimmer is unplugged, release the tabs by pressing them down with your fingers, and pull it straight off. Place the new cover on by simply snapping it into place. This plastic cover is sold individually.
Trimmer Fuel Tank Assembly
$15.20
Special Order
Fix Number
FIX10009586
Manufacturer Part Number
753-06183
This is an authentically sourced fuel tank assembly, including the fuel lines, fuel cap, fuel filter, and screws needed for assembly. This fuel tank assembly is for trimmers, and is where the fuel is filtered and stored for use with the engine. Due to its constant contact with fuel, especially if fuel has been left it in for extended periods of time, it may crack, in which case it should be replaced immediately. Leaking gas is very dangerous, so it is important that it get fixed quickly. Before beginning this repair, drain the gas from the tank before installing the new one.
Fixes these symptoms
Fuel Tank Assembly W/Fuel Lines Incl. 29
$26.83
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX11812933
Manufacturer Part Number
753-06797
Fixes these symptoms
Trimmer Fuel Tank Assembly
$22.40
Special Order
Fix Number
FIX9982318
Manufacturer Part Number
581263701
This genuine fuel tank assembly is an original replacement part sourced directly from the manufacturer and is commonly used in Craftsman trimmers and weedwackers. Made from high-quality plastic for durability, it includes the attached fuel tank cap for a secure seal. Replacing this part may require an Allen wrench or hex key, depending on your model. The fuel tank assembly is sold individually and is designed to meet OEM standards for fit and performance.
Fixes these symptoms
Buttonfeed Bump
$18.45
In Stock
Fix Number
FIX16666051
Manufacturer Part Number
144-4105

Trimmer Brands

Related Trimmer Parts

Popular Trimmer Models