OEM MTD Tiller Parts & Accessories

Trimmer Fuel Return Line

$7.89

Fix Number: FIX9137685
Manufacturer Part Number: 791-181086

This is a fuel return line, and it is used with various outdoor lawn equipment. Fuel travels through the return line into the carburetor, and from the primer bulb/pump into the fuel system. The line returns the extra fuel back into the tank. This part will crack and become brittle over time. If your fuel line is leaking, you will need to replace it. Before you begin repair work on your equipment make sure you drain the fuel from the tank, and remove the spark plug.

Watch the install video

Trimmer Primer and Hose Assembly

$27.42

Fix Number: FIX10014772
Manufacturer Part Number: 791-683974B

This is a primer and hose assembly, and it is used on various lawn equipment. The assembly comes with two parts. The first is the hose which is almost 5 inches long, and less than a 1/4 inch thick. The second part is the primer bulb or primer pump, and that is 2 inches long, and 1 inch wide, with a round bulb head. Together, the primer and hose assembly fill the carburetor with fuel to give your machine a quicker start. After time, your hose will crack and your primer will lose elasticity. Both will have to be replaced when this happens. Before starting this repair make sure to drain the fuel from the tank, and remove the spark plug.

Fixes these symptoms

Will Not Start
See more...

Watch the install video

Trimmer Fuel Line and Filter

$20.76

★★★★★

1 Review

Fix Number: FIX10014709
Manufacturer Part Number: 791-682039

This fuel line filters the fuel in the tank as it pushes into the carburetor by the primer bulb. If your carburetor is not getting fuel, ports get clogged, or the fuel line is leaking, then replacing this part will solve these problems. It is important to replace it as soon as damage is noticed because clogging can result in your engine not starting. For this repair, you will need the following tools: torx/Phillips drivers, long screwdriver, long-nosed pliers, long screwdriver, cutters or scissors, and two-cycle engine oil. For this repair, first remove the retainer ring from the fuel line and insert it through gas cap opening. Next, thread the fuel line through the hole in the bottom of the fuel tank and pull the line through to firmly place it against the tank wall. For the last steps, put the retainer ring on the fuel line and press the ring firmly against the external side of the fuel tank wall. Lastly, attach it to correct line on the carburetor.

Fixes these symptoms

Will Not Start
See more...

Fuel Bowl Gasket

$6.45

Fix Number: FIX17605340
Manufacturer Part Number: 951-11348A

Hex L-Nut

$5.07

Fix Number: FIX9406571
Manufacturer Part Number: 712-0429

Cultivator Air Filter

$5.95

Fix Number: FIX9117898
Manufacturer Part Number: 753-05996

Snow Blower Chute Flange Keeper

$5.95

Fix Number: FIX10005747
Manufacturer Part Number: 731-0851A

Tiller Cable Barrel Holder

$5.95

Fix Number: FIX9167431
Manufacturer Part Number: 946-0605

Installation Instructions

BURTON from SAN ANTONIO, TX

Ends of control cables are attached with small plastic holder that easily breaks.

Remove small broken plastic cable barrel holder from handle bar mounted control lever with medium standard blade screw driver. Insert control cable barrel into the new replacement holder and re-install to the control lever using existing mounting screw. Order extra cable barrel holders and attach to tiller handle with wire or ty-rap so you have them handy for future use. Easy to replace but tiller is useless without it. Each holder has an "L" or "R" marked on them for reference and must be the same as replaced. Read more...

Snow Blower Locking Flange Nut

$5.95

Fix Number: FIX9092936
Manufacturer Part Number: 712-04063

This nut is fit for lawn and garden equipment and is used to resist loosening when properly threaded onto a bolt. The nut is sold individually. The diameter of the nut is 5/16 inches and the thread size is 18. Refer to the manual provided by the manufacturer for repair instructions.

Installation Instructions

Ronald from SPEARFISH, SD

Replace sheave plate and side skid shoes on snowblower.

Remove eight bolts and two skid shoes and bottom sheave plate. Replace in reverse order.
Most important, get the correct OEM parts from FIX.com. Refer to product parts list in model instruction manual.
Do that first and you too can see how easy this repair is and save big bucks charged by retail repair shop! Read more...

Tiller Bearing

$7.88

Fix Number: FIX9164778
Manufacturer Part Number: 931-0374

MTD Tiller Parts

Popular MTD Tiller Parts

Installation Instructions

Installation Instructions

MTD Tiller Appliance Types

Related MTD Tiller Parts

Popular MTD Tiller Models

MTD Tiller Parts

Start With Your Model Number

Popular MTD Tiller Parts

Installation Instructions

Installation Instructions

MTD Tiller Appliance Types

Related MTD Tiller Parts

Popular MTD Tiller Models