Leaf Blower / Vacuum Hardware

Fix Number

FIX8859978

Manufacturer Part Number

13211546730

This is a fuel line grommet, and it is used with various lawn and garden equipment. This part prevents leaking fuel and fumes. The grommet is placed in the fuel tank to seal the opening area where the fuel line and the fuel tank connect. A worn grommet is a safety hazard because it will cause fuel to leak from the tank. We recommend when replacing it to also replace the fuel line. Before starting this repair make sure to drain the fuel from the tank, and remove the spark plug.

Fix Number

FIX9261895

Manufacturer Part Number

13201309820

Fix Number

FIX8917824

Manufacturer Part Number

21041752730

Fix Number

FIX9066494

Manufacturer Part Number

69911804560

Fix Number

FIX9151559

Manufacturer Part Number

90051600005

Fix Number

FIX10053748

Manufacturer Part Number

V490001230

This is a clip for a variety of lawn and garden equipment. The clip is made of a durable metal, and is 6.5mm in diameter. This part is most commonly used to clamp tubes and hoses in place. The clip is sold individually.

Fix Number

FIX9162880

Manufacturer Part Number

90050200006

Fix Number

FIX9999668

Manufacturer Part Number

703409

This nut is mostly used in lawn tractors and snow blowers and is in different locations in the machine, depending on appliance. It is made from metal and measures to 5/16 inches for the diameter and a thread count of 18. Tip: Remember there are different nuts used in the machine, be sure you are ordering the correct part. The tool needed for this repair is a wrench. *Please note: this part is sold individually. Refer to the diagram provided by the manufacturer for instructions.

Fix Number

FIX8925657

Manufacturer Part Number

222698S

Fix Number

FIX9995391

Manufacturer Part Number

6697846

This is a return grommet for your lawn and garden equipment. This part creates an airtight seal to prevent fuel leaking from your machine. We recommend installing both the grommet and the return fuel line together. Place the return fuel line inside the grommet and install both into the fuel tank.