OEM Poulan Lawn Tractor Parts & Accessories

Lawn Tractor Mandrel Assembly

$48.56

★★★★★

1 Review

Fix Number: FIX12087499
Manufacturer Part Number: 587819701

Installation Instructions

Terrence from LORENA, TX

Blade mandrel replacement

1. Remove mower deck.
2. Remove mower blade from defective mandrel.
3. Clean caked up grass from underside of mower deck.
4. Remove belt pulley from top of defective mandrel.
5. Remove four bolts fastening defective mandrel to deck. Note: bolts will most likely shear - make sure you have new ones.
6. Install new mandrel to deck using four new self-tapping bolts.
7. Reinstall mower blade to new mandrel assembly.
8. Reinstall belt pulley to new mandrel assembly.
9. Reinstall mower deck to tractor. Read more...

Bearing

$6.21

Fix Number: FIX9006914
Manufacturer Part Number: 532009040

This is a premium-quality OEM front wheel flange bearing (sometimes called bushing) commonly used in riding lawn mowers. They are used to keep the wheel held in place securely. It is sold individually but two are needed for each front wheel. It is recommended that they be replaced at the same time. Install this part with the flat side facing the grease zerk in the rear side of the wheel.

Ring Klip Number T5304-75

$3.99

Fix Number: FIX9143890
Manufacturer Part Number: 812000029

This manufacturer-approved ring clip is found in various lawn and garden equipment models. A ring clip is used as a fastener that secures components or assemblies onto a shaft or housing (such as part of a mower wheel or steering assembly). When it is installed, the part that is visible acts as a shoulder, holding the specific component or assembly together. This very small metal ring clip (approximately 1-inch by 1-inch) is sold individually.

Cap Axle Black 1 50 x 1 00

$3.99

Fix Number: FIX9007667
Manufacturer Part Number: 532104757

This is an OEM axle cap for lawn tractors and is sold individually. It stops debris from getting into the wheel hub and axle. This axle cap is prone to wear and tear and should be replaced when it is goes missing or appears damaged. No tools are necessary for this easy repair, simply locate the cap axle on the rim of the wheel and remove.

Bolt and Washer Assembly

$8.71

Fix Number: FIX9020856
Manufacturer Part Number: 532193003

This manufacturer-approved bolt and washer assembly is for lawn tractors. Wear work gloves to protect your hands when installing this part.

Blade Mower Hi Lift

$23.87

★★★★★

1 Review

Fix Number: FIX9017804
Manufacturer Part Number: 532405380

This is a manufacturer-approved high quality replacement blade for a lawn tractor and is sold individually. It is used on 46-inch decks, and measures approximately 22-1/2 inches long and 2-3/4 inches wide. This blade is a high-lift blade (2-in-1 blade), meaning it is designed with curved tips that lift grass clippings up and out through the discharge chute into a grass bag (if applicable). By replacing a dull, bent, or damaged blade, this will ensure a better quality cut. For this repair, you will need a wrench to remove the blade bolt, and we recommend wearing gloves to protect your hands.

Washer 25/32 x 1-1/4 x 16 Ga.

$3.99

Fix Number: FIX9008998
Manufacturer Part Number: 532121749

This is a flat metal washer found in various models of lawn mowers and is sold individually. This flat washer can have various functions depending on the equipment; however, its general purpose is to spread the load under a bolt or screw. It also helps to reduce heat and friction as the fastener is tightened. This repair may require a screwdriver or socket wrench, depending on the fastener for your model. This is a single flat washer; the fasteners are sold separately.

Blade Mower

$16.18

★★★★★

1 Review

Fix Number: FIX9286056
Manufacturer Part Number: 532138971

This replacement blade is supplied directly from the original equipment manufacturer for use with Craftsman riding lawn mowers and garden tractors. It is secured under the deck to cut the grass, over time the blade may become dull or damaged causing irregular cutting patterns. Inspect your blades periodically and replace them as needed to maintain a clean cut lawn. It is a high-quality component which is made of durable steel and it is sold individually.

Blade High Lift

$17.43

Fix Number: FIX9015048
Manufacturer Part Number: 532180054

This is an OEM replacement part, sold individually. The High Lift Blade is also referred to as a 2 in 1 blade. It throws the clippings better, and is used when you are just discharging or bagging the grass clippings. If you want to Mulch your clippings you would want to purchase a Mulching Blade. This part is compatible with the mowers and tractors listed below. A wrench is needed for replacement.

Nut, Flange Lock, 5/16-18, Grf

$4.10

Fix Number: FIX9092936
Manufacturer Part Number: 712-04063

This nut is fit for lawn and garden equipment and is used to resist loosening when properly threaded onto a bolt. The nut is sold individually. The diameter of the nut is 5/16 inches and the thread size is 18. Refer to the manual provided by the manufacturer for repair instructions.

Installation Instructions

Ronald from SPEARFISH, SD

Replace sheave plate and side skid shoes on snowblower.

Remove eight bolts and two skid shoes and bottom sheave plate. Replace in reverse order.
Most important, get the correct OEM parts from FIX.com. Refer to product parts list in model instruction manual.
Do that first and you too can see how easy this repair is and save big bucks charged by retail repair shop! Read more...

Poulan Lawn Tractor Parts

Popular Poulan Lawn Tractor Parts

Installation Instructions

Installation Instructions

Appliance Type

Related Pages

Popular Poulan Lawn Tractor Models

Poulan Lawn Tractor Parts

Start With Your Model Number

Popular Poulan Lawn Tractor Parts

Installation Instructions

Installation Instructions

Appliance Type

Related Pages

Popular Poulan Lawn Tractor Models