OEM Homelite Parts & Accessories

Detergent Suction Kit

$5.19

Fix Number: FIX9938134
Manufacturer Part Number: 308452002

This is an OEM detergent suction kit, also referred to as a chemical injection kit, for a pressure washer. This kit is threaded into the pump assembly and is connected to the chemical siphon tube that is located in a container that holds the cleaner. This kit includes, (1) bronze nozzle, (1) large O-ring, (1) small O-ring, (1) steel ball, (1) spring (5 components total). For this repair, use a pair of pliers to grasp the detergent supply tube and remove the tube from the chemical injector. Remove the old injector with a wrench. To prepare the kit, start by placing the O-rings on the bronzed nozzle, then the steel ball, then the spring. Apply lubricant on the large O-ring and then thread it back into the port.

Fixes these symptoms

Leaks water
See more...

Toggle Switch

$7.28

Fix Number: FIX17016247
Manufacturer Part Number: 12313R

Sourced directly from Ridgid, this OEM approved replacement Toggle Switch is designed for certain models of Ridgid Utility Vacuums. To see if your device is compatible, please see the "Model Cross Reference List" below. The primary purpose of the Toggle Switch is to turn the device on/off, as well as playing a role in electric breaking by momentarily reversing electrical polarity. Due to the mechanical internals of switches, they tend to degrade and wear out over time, making them a commonly replaced part in appliances. Common symptoms of a broken switch include: the device has completely stopped functioning, it will not turn on, and turning off intermittently during use. Each Toggle Switch is sold individually.

Wheel

$13.47

Fix Number: FIX16324400
Manufacturer Part Number: 308451067

Compression Spring

$5.19

Fix Number: FIX9996272
Manufacturer Part Number: 679034001

This is a compression spring for trimmers and edgers. The purpose of the compression spring is to provide tension to the trimmer head feed assembly. It is common for this spring to weaken to the point that it is no longer supplying tension. This may become obvious when the trimmer head is feeding line even when it has not been bumped to the ground. For this repair, you will need to remove the head knob, spool, and plastic slider. This should be a fairly quick and simple process that can be done with a screwdriver.

Spray Wand

$12.40

Fix Number: FIX12090574
Manufacturer Part Number: 308494075

This is an OEM spray wand for a pressure washer, sold individually. The spray wand attaches to the trigger handle, and the nozzle attaches to the end of the spray wand. It has a fitting size of 1/4-inches. The most common reason for replacing the spray wand is when water is leaking from it. There are a few common causes of a leaky wand, including a damaged O-ring, where it attaches to the trigger handle, or a damaged O-ring or coupler where the nozzle is attached. There also may be a crack in the plastic housing. This is a simple replacement that does not requiring any tools.

High Pressure Hose

$24.55

★★★★★

2 Reviews

Fix Number: FIX9938515
Manufacturer Part Number: 308835065

This is an OEM quality high pressure hose for a pressure washer. It is constructed with a durable rubber/plastic material and measures 25-feet long. It has a 6-mm braid and produces a 1700 PSI. The high pressure hose connects to the trigger handle on one end and the pump on the other. This high pressure hose consists of an outer covering which provides strength to the hose. If this outer covering becomes damaged, it needs to be replaced immediately. A kinked or broken hose can produce a high pressure leak, which can be dangerous, so please replace this hose as soon as leaks or damage are noted.

Fixes these symptoms

Leaks water
See more...

Air Cleaner Element

$6.08

★★★★★

2 Reviews

Fix Number: FIX10039827
Manufacturer Part Number: A100631

Installation Instructions

Jeff from TERRELL, TX

Fuel crystal rebuilt fu

Rebuilt fuel system. Read more...

Fuel Tank With Cap

$17.44

★★★★★

1 Review

Fix Number: FIX9937937
Manufacturer Part Number: 308181004

The Fuel Tank is an OEM replacement part. It is compatible with the models shown below. It includes the fuel lines, fuel cap and fuel filter. If you need to order the fuel tank bumpers, they are sold individually as part number 98792.

Adapter Blade

$5.20

Fix Number: FIX9997610
Manufacturer Part Number: 692496002

This is a single adaptor blade, sold individually. The blade adapter keeps the blade steady in the proper position while the tool is being used, and also makes it possible to use accessories from other manufacturers. When using these accessories, you will install the adaptor first, and then the chosen accessory. Depending on the manufacturer, you will install the adaptor with either the B facing out or the D facing out. You will need to consult the user manual to know which side is correct for your specific tool.

Hook and Loop Backing Pad

$8.04

★★★★★

2 Reviews

Fix Number: FIX10075791
Manufacturer Part Number: 030157001018

Homelite Parts

Popular Homelite Parts

Installation Instructions

Homelite Appliance Types

Popular Homelite Models

Homelite Parts

Start With Your Model Number

Popular Homelite Parts

Installation Instructions

Homelite Appliance Types

Popular Homelite Models