Part Location Diagram of 218976903 Frigidaire Water Tube Inlet
See part NI in the diagram
( Grid squares measure 1x1 inch )

Water Tube Inlet 218976903

Works With Model 25354363400!

Rated by 1 customers 

?

A Bit Difficult 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

?
$55.37
Special Order
Fix Number:
FIX429432
Manufacturer #:
218976903
Manufactured by:
Frigidaire
Works With Model 25354363400!

Product Description

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 2.3 / 5.0, 1 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Jonathan from Centennial, CO
Parts Used:
218976907, 218976903
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set
Water leak in the tube from the filter to the water valve
Pull out the refrigerator, then remove the cardboard cover at rear base. Unscrew the pink tube at the water valve (lower right side, when looking from the rear). Then remove the shelves from inside the refrigerator. Remove the right shelf bracket at rear, so that you can take off the plastic channel that hides the water tubes. Take out th e light bulb at the top, then remove the screws holding the filter assembly to the top. I also took off the control assembly that runs across the top (that contains the light bulb socket), so I could more easily access the water lines where enter the filter assembly. Now the hard part: pulling the water line out of the filter assembly. There's no screw-in fitting at this end: the tube passes in through a little blue ring that holds an o-ring in place around the tube. It really does just press in, but after 10 years, it might as well as be glued in place (oh why didn't they use a screw fitting on this end too!). If you break the little blue ring, it won't hold a seal -- the worst case is you then replace the water filter base assembly (into which the water lines feed). Pull out the old tube from behind the fridge; feed in the new one; attach the new one at the water valve (screw fitting, very easy), feed the tube across the rear, then up into the refrigerator compartment, pull it through, push it into the water filter base assembly (assuming you've replaced the durn little blue rung that broke pulling the old tube out), and put everything back together. Except for the pulling the old tube out of the water filter base without breaking parts, it's actually a pretty easy repair.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX429432
Manufacturer Part Number: 218976903
Brand Model Number Description
Kenmore 25331133303 Refrigerator
Kenmore 25331135303 Refrigerator
Kenmore 25331143303 Refrigerator
Kenmore 25331145303 Refrigerator
Kenmore 25344302400 Refrigerator
Kenmore 25344302401 Refrigerator
Kenmore 25344303401 Refrigerator
Kenmore 25344303402 Refrigerator
Kenmore 25344303403 Refrigerator
Kenmore 25344304400 Refrigerator
Kenmore 25344304401 Refrigerator
Kenmore 25344309400 Refrigerator
Kenmore 25344309401 Refrigerator
Kenmore 25344333600 Refrigerator
Kenmore 25344333601 Refrigerator
Kenmore 25344333602 Refrigerator
Kenmore 25344352400 Refrigerator
Kenmore 25344352401 Refrigerator
Kenmore 25344352403 Refrigerator
Kenmore 25344352405 Refrigerator
Kenmore 25344353400 Refrigerator
Kenmore 25344353401 Refrigerator
Kenmore 25344353402 Refrigerator
Kenmore 25344353403 Refrigerator
Kenmore 25344353405 Refrigerator
Kenmore 25344354400 Refrigerator
Kenmore 25344354401 Refrigerator
Kenmore 25344354403 Refrigerator
Kenmore 25344354405 Refrigerator
Kenmore 25344359400 Refrigerator