Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
Drain Hose WD24X10014
- Fix Number:
- FIX260686
- Manufacturer #:
- WD24X10014
- Manufactured by:
- GE
- Product Description
- This drain hose is an OEM, manufacturer-approved replacement part for your dishwasher. The drain hose filters out the wastewater from the dishwasher. If there is a hole in it, water will leak out of your dishwasher. Shut off the water and power to the unit before beginning this repair. Accessing the drain hose involves unscrewing the dishwasher and pulling it out. Remove the clamp holding the hose in place to its connection under the sink, using a 5/16ths socket. Disconnect the fill line. Use a 1/4 inch nut driver to loosen the clamp at the other end of the drain hose. Keep a towel handy for any water still inside. Keep the clamps for use on your new drain hose. Reinstall all hoses and lines in reverse order.
- Works with the following brands:
- General Electric, Hotpoint, Kenmore
- Works with the following products
- Dishwasher
- Fixes the following symptoms
- Leaking, Not draining
- Part# WD24X10014 replaces these:
- AP2039914, 783289, WD24M0020, WD24M20, WD24X0211, WD24X0219, WD24X10003, WD24X211, WD24X219, WD38X0106, WD38X106
Product Description
This drain hose is an OEM, manufacturer-approved replacement part for your dishwasher. The drain hose filters out the wastewater from the dishwasher. If there is a hole in it, water will leak out of your dishwasher. Shut off the water and power to the unit before beginning this repair. Accessing the drain hose involves unscrewing the dishwasher and pulling it out. Remove the clamp holding the hose in place to its connection under the sink, using a 5/16ths socket. Disconnect the fill line. Use a 1/4 inch nut driver to loosen the clamp at the other end of the drain hose. Keep a towel handy for any water still inside. Keep the clamps for use on your new drain hose. Reinstall all hoses and lines in reverse order.
-
Works with the following brands:General Electric, Hotpoint, Kenmore
-
Works with the following products:Dishwasher
-
Fixes the following symptoms:Leaking, Not draining
-
Part# WD24X10014 replaces these:AP2039914, 783289, WD24M0020, WD24M20, WD24X0211, WD24X0219 ... Show more , WD24X10003, WD24X211, WD24X219, WD38X0106, WD38X106 Show less
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts Additional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
- Customer:
- Anita from West Fulton, NY
- Parts Used:
- WD24X10014
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
- < Prev
- 1
- Next >
Model Compatibility
Manufacturer Part Number: WD24X10014