Part Location Diagram of 154665201 Frigidaire Heating Element
See part F1 in the diagram
Replacing your Frigidaire Dishwasher Heating Element
( Grid squares measure 1x1 inch )

Heating Element 154665201

Works With Model CDB500CGB0!
★★★★★
★★★★★
1 Review

Rated by 3 customers 

?

A Bit Difficult 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$58.20
In Stock
Fix Number:
FIX2355742
Manufacturer #:
154665201
Manufactured by:
Frigidaire
Works With Model CDB500CGB0!

Product Description

This part is not designed to heat the water that enters it, but is designed to maintain the heat of the water that enters the dishwasher and is located on the bottom of the dishwasher. Grommets are included with this part.

Videos For installing this part.

Replacing your Heating Element

Replacing your Heating Element

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 2.7 / 5.0, 3 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Reed from Sussex, NJ
Parts Used:
154665201
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
Replaced heating element
First start with an empty dishwasher and remove the bottom rack, shut off the water. Turn off the power. Disconnect the drain, power and water supply to the dishwasher. Remove the stabilizing screws from the front top of the unit. Slide the unit out. Turn on its side. From underneath disconnect the 2 leads to the heater. Remove the nuts f rom the bottom of the heater element. Be careful, they are very thin. Pull the element up and out from the inside. Place the new element in and put the nut back on enough to compress and seal the washers on the inside. Re attach the element leads and re install the way you took out. Search YouTube for videos. That's what I did.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Danny from ATASCADERO, CA
Parts Used:
154665201, 154290204
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Wrench set
Dishes not drying, not cleaning properly
Removed the bottom front cover. removed the screws holding the water valve and moved it out of the way. Located the thermostat and connections for heating element. Loosen the thermostat retainer with short Phillips screwdriver. Remove thermostat. One connection was burnt, cut to good wire, crimped on new connector. installed new thermosta t reverse of removal. Removed wire connectors for heating element, loosened brass nuts with short 13mmbox wrench(1/2" will fit). not much room for big tools. Removed element from inside washer. Installed new element reverse of removal. Washer works like new.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
PETER from CAMDEN, ME
Parts Used:
154665201
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Wrench (Adjustable)
Heating element failure
This could have been a relatively easy repair as the instruction video was very clear. When I pulled out the washer to access the electrical connectors and remove the nuts on the underside of the element, I found that they were covered in white sealant of some sort. Had to use a knife to cut away the sealant. The further I got into the repair, the more I realized that something was really wrong. I finally got the heater out, but the two holes where the element had been we're still filled with hardened sealant and parts of the edges of the holes had been chipped away so that replacing it would never seal properly. It was at that virtual second that the new element arrived by Fedex. I didn't even bother opening the box. Needless to say, I was not AT ALL happy that we had purchased this "new" dishwasher fifteen years earlier from a reliable local appliance repair guy who we normally think does great work. He must have known about this problem and had jerry rigged it that way, but never told us about it. As such, my wife and I had a date that night to go buy a brand new GE dishwasher from Lowes. I spent about four hours installing the new one and it works fine now. This site did a fine job of shipping me the new part and will issue a refund for the unopened/unused part. Their instruction video was right on the mark. The only problem we had is that we had a faulty dishwasher that couldn't be repaired. Considering that it was fifteen years old, we got some good life out of it.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Customer Reviews
Average Rating: (1 Review)
5.0
★★★★★
★★★★★
Filter By Rating:
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Model Compatibility

This part works with the following models:
Fix Number: FIX2355742
Manufacturer Part Number: 154665201
Brand Model Number Description
Kenmore 58714000100 Dishwasher
Kenmore 58714000101 Dishwasher
Kenmore 58714000102 Dishwasher
Kenmore 58714001990 Dishwasher
Kenmore 58714001991 Dishwasher
Kenmore 58714001992 Dishwasher
Kenmore 58714001993 Dishwasher
Kenmore 58714002990 Dishwasher
Kenmore 58714002991 Dishwasher
Kenmore 58714002992 Dishwasher
Kenmore 58714002993 Dishwasher
Kenmore 58714003100 Dishwasher
Kenmore 58714008001 Dishwasher
Kenmore 58714008002 Dishwasher
Kenmore 58714008003 Dishwasher
Kenmore 58714009100 Dishwasher
Kenmore 58714009101 Dishwasher
Kenmore 58714009102 Dishwasher
Kenmore 58714012400 Dishwasher
Kenmore 58714012401 Dishwasher
Kenmore 58714012402 Dishwasher
Kenmore 58714012403 Dishwasher
Kenmore 58714012404 Dishwasher
Kenmore 58714012405 Dishwasher
Kenmore 58714012406A Dishwasher
Kenmore 58714013400 Dishwasher
Kenmore 58714013401 Dishwasher
Kenmore 58714013402 Dishwasher
Kenmore 58714013403 Dishwasher
Kenmore 58714013404 Dishwasher