Part Location Diagram of 74007498 Whirlpool Range Oven Igniter Vertical Mount Bake And Broil
See part 6 in the diagram
( Grid squares measure 1x1 inch )

Range Oven Igniter Vertical Mount Bake And Broil 74007498

Works With Model CGR1425ADW!
★★★★★
★★★★★
5 Reviews

Rated by 18 customers 

?

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

?
$92.96
In Stock
Fix Number:
FIX2085070
Manufacturer #:
74007498
Manufactured by:
Whirlpool
Works With Model CGR1425ADW!

Product Description

If your gas range is not lighting or coming up to temperature, there may be an issue with the igniter. The igniter is used to create a spark that lights the gas, and if it is glowing but will not light then the igniter will need to be replaced. This part is an authentic OEM replacement oven igniter for your gas range. The part comes with a metallic mounting bracket, and a dual wire lead that is 7-inches in length. Before beginning this repair, please be sure to disconnect both the power and gas supply to your range.

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.3 / 5.0, 18 reviews.
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
John from Sterling Heights, MI
Parts Used:
74007498
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Oven was taking twice as long to preheat.
I first removed the oven door by opening it slightly and lifting it straight up. This gives you easier access to inside the oven. Remove the inside grates and bottom of oven floor- (2 tabs in back slide toward you then lift up).Carefully slide oven away from the wall. Disturb the gas line as little as possible. Unplug the appliance. Now y ou have access to the igniter (inside of oven), and the igniter plug (behind the oven). I then removed 2 hex nut bolts (5/16") on igniter bracket, unplugged the igniter- (back of oven), and fished the wires back through the oven wall. For installation of the new igniter, reverse this procedure. Note that the hole in the back of the oven where the wires run through has heat resistant cotton-like material to help seal that hole. This is where I used the needle nose pliers to shift that material around.
7 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
David from Menomonee, WI
Parts Used:
74007498
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Oven would not light.
The repair could not have been easier. No surprises. The thing that really stands out about installing a new igniter was the efficient service I received from this site. There were other igniters for sale on the internet, and many were cheaper, but I was lucky enough to select a part distributor who is honest and efficient. This next part is amazing. I ordered the part on Thursday afternoon and the part was delivered Saturday morning at 9:00 AM. I installed the part, gave the oven a good cleaning, my wife started cooking. I also called and thanked them. I like good work.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jackie from HUNTINGTON, UT
Parts Used:
74007498
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Socket set
Original screws not easily removed
Had to use the reciprocating saw to remove original screws. Then had to use other nuts/bolts to install new igniter.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Norris from Glenn Dale, MD
Parts Used:
WP7432P136-60, 74007498
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
The oven and broilet igniter would not ignite
First I disconnect the power to the range and turn off the gas. I then Removed the defective parts with a phillips screw driver and replace with the new parts
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Edward from Montague, MI
Parts Used:
74007498
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Oven would not heat up
Searched YouTube and found a video of the procedure. Followed it and oven now works.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Peter from Philadelphia, PA
Parts Used:
74007498
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Oven lights up and never when over 160' even after 1/2 hour still just warm !!
Removed the door,then removed the bottom plate .2 little bolt that hold the igniter in place ..
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
James from sewell, NJ
Parts Used:
74007498
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
was not lighting and smelled gas when trying to light
At first I tried replacing the thermostat, because the igniter was glowing. Did not work, so I had to change the igniter. Job was not hard except I could not back the two screws out that held the part in place. I tried everything and ended up cutting the head off the two screws. Once they were off replacing thepart was simple and works p perfectly now. I did have to buy two new screws to hold the part in place.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Cynthia from Houston, PA
Parts Used:
74007498
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Oven would not come on, light
Watched video and did what it said to solve problem. The video made all very easy. I ordered wrong part and had to order correct part but I was pleased on how easy you made it to do return. I have been telling all about this site for self repairs. So glad we found you. Thank you very much.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Joseph from Grand Rapids, MI
Parts Used:
74007498
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Socket set
Uneven oven temperature
I removed the oven door. Then removed the burner cover exposing the shield. There is a wingnut holding that on. After removing that I pulled the igniter wires up through a opening and disconnected them.i then used a ratchet and socket to remove the two screws holding the igniter in place. One came out easily but the second stripped the ho le. I positioned the new igniter and installed the one screw holding it in place. I then tapped the stripped hole and used a new screw to complete the installation. I finished by reinstalling the removed shield,cover and door. Oven now works great!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Steven from great bend, KS
Parts Used:
74007498
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Oven was heating up very slowly and noticed a slight gas odor
Opened the oven door, and removed the oven racks. Took out two screws that held the bottom plate of the oven, which were located towards the back of the oven. Removed the bottom plate. Unscrewed the two screws that held in the igniter. On the back of the oven there is a small inspection plate located in the center of the back of the ove n, removed one screw to remove inspection plate. Unplugged the igniter, then removed it from the front of the oven. The igniter on my oven had a different connector than the one I ordered, so I cut off the connector from the old one and spliced it to the new one using electrical twist nuts. After putting the oven back together the oven worked great. It took about ten minutes to do the repair
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Customer Reviews
Average Rating: (5 Reviews)
5.0
★★★★★
★★★★★
Filter By Rating:
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Model Compatibility

This part works with the following models:
Fix Number: FIX2085070
Manufacturer Part Number: 74007498
Brand Model Number Description
Magic Chef 31001SAT Range - Freestanding, Gas
Magic Chef 31203PAQ Range - Freestanding, Gas
Magic Chef 9112WUT Range - Built-in, Gas
Admiral A31713XATL Range - Freestanding, Gas
Amana AGR4400ADW Range - Freestanding, Gas
Amana AGR4412ADB Range - Freestanding, Gas
Amana AGR4412ADQ Range - Freestanding, Gas
Amana AGR4412ADS Range - Freestanding, Gas
Amana AGR4412ADW Range - Freestanding, Gas
Amana AGR5712ADB Range - Freestanding, Gas
Amana AGR5712ADQ Range - Freestanding, Gas
Amana AGR5712ADS Range - Freestanding, Gas
Amana AGR5712ADW Range - Freestanding, Gas
Amana AGR5712ADZ Range - Freestanding, Gas
Amana AGR5712BDB Range - Freestanding, Gas
Amana AGR5712BDQ Range - Freestanding, Gas
Amana AGR5712BDW Range - Freestanding, Gas
Amana AGR5712BDZ Range - Freestanding, Gas
Amana AGR5715QDB Range - Freestanding, Gas
Amana AGR5715QDQ Range - Freestanding, Gas
Amana AGR5715QDS Range - Freestanding, Gas
Amana AGR5715QDW Range - Freestanding, Gas
Amana AGR5725QDB Range - Freestanding, Gas
Amana AGR5725QDQ Range - Freestanding, Gas
Amana AGR5725QDS Range - Freestanding, Gas
Amana AGR5725QDW Range - Freestanding, Gas
Amana AGR5725RDB Range - Freestanding, Gas
Amana AGR5725RDB12 Range
Amana AGR5725RDB13 Range
Amana AGR5725RDB14 Range