Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
R CERAMIC FUSE,20A/250V,MHC W11707984
- Fix Number:
- FIX17629444
- Manufacturer #:
- W11707984
- Manufactured by:
- Whirlpool
- Product Description
- If your microwave is not turning on it could be due to your fuse needing to be replaced. This part protects the microwave by shutting it off if there is an electrical surge. This fuse is just over an inch long, is metallic on both ends and ceramic in the middle. Before beginning this repair, unplug the appliance and wait a few minutes before starting. Remove the outer cabinet which is held in place with two screws. You will then locate the power cord which will lead you to the fuse holder. Determine if the fuse has blown. Using an ohmmeter, you should be able to figure out if it has blown. A proper reading is zero ohms, if it reads as anything else then your fuse has in fact blown. Simply snap the old fuse out of place and place the new one in.
- Works with the following brands:
- Whirlpool, Maytag, KitchenAid, Kenmore
- Works with the following products
- Microwave, Microwave Oven Combo, Washer
- Fixes the following symptoms
- Won’t turn on, No heat
- Part# W11707984 replaces these:
- 14211054, 4393146, 4393308, W10138793, W10422951
Product Description
If your microwave is not turning on it could be due to your fuse needing to be replaced. This part protects the microwave by shutting it off if there is an electrical surge. This fuse is just over an inch long, is metallic on both ends and ceramic in the middle. Before beginning this repair, unplug the appliance and wait a few minutes before starting. Remove the outer cabinet which is held in place with two screws. You will then locate the power cord which will lead you to the fuse holder. Determine if the fuse has blown. Using an ohmmeter, you should be able to figure out if it has blown. A proper reading is zero ohms, if it reads as anything else then your fuse has in fact blown. Simply snap the old fuse out of place and place the new one in.
-
Works with the following brands:Whirlpool, Maytag, KitchenAid, Kenmore
-
Works with the following products:Microwave, Microwave Oven Combo, Washer
-
Fixes the following symptoms:Won’t turn on, No heat
-
Part# W11707984 replaces these:14211054, 4393146, 4393308, W10138793, W10422951
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts Additional or alternate parts to consider.
- < Prev
- 1
- Next >
Model Compatibility
Manufacturer Part Number: W11707984