Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
Drive Belt WPW10006384
$19.69
In Stock
- Fix Number:
- FIX11747978
- Manufacturer #:
- WPW10006384
- Manufactured by:
- Whirlpool
- Product Description
- The drive belt works with the pulley in your washer in order to spin the tub. If you notice a burning rubber smell, your washer has become excessively noisy, or it will not spin, it could indicate an issue with the drive belt. Over time the belt can become worn and snap, or it can become loose and no longer provide the proper grip to spin. This is a genuine OEM part for your washer that is black in color and made of rubber.
- Works with the following brands:
- Whirlpool, Maytag, Kenmore, Amana
- Works with the following products
- Washer, Washer Dryer Combo
- Fixes the following symptoms
- Will not agitate, Spins slowly, Burning smell, Spinning Issues
- Part# WPW10006384 replaces these:
- AP6014712, W10006384, WPW10006384VP
Part Number Cross Reference
Product Description
The drive belt works with the pulley in your washer in order to spin the tub. If you notice a burning rubber smell, your washer has become excessively noisy, or it will not spin, it could indicate an issue with the drive belt. Over time the belt can become worn and snap, or it can become loose and no longer provide the proper grip to spin. This is a genuine OEM part for your washer that is black in color and made of rubber.
-
Works with the following brands:Whirlpool, Maytag, Kenmore, Amana
-
Works with the following products:Washer, Washer Dryer Combo
-
Fixes the following symptoms:Will not agitate, Spins slowly, Burning smell, Spinning Issues
-
Part# WPW10006384 replaces these:AP6014712, W10006384, WPW10006384VP
Videos For installing this part.
Replacing your Drive Belt
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Leigh
November 4, 2022
Spin cycle always knocking, jumping - have to adjust clothes to get it balanced ti complete spin cycle.
suspension rods that may need replacing?
Belt needs replacing?
Both?
For model number 11020222511
Hello Leigh, thank you for contacting us. Please inspect the health of the belt and make sure it is not worn out or damaged. The issue you describe is most probably related to the suspension rod kit, part number FIX11703290. If the belt is damaged, replacing it is also recommended. We would also recommend checking the drive pulley, part number FIX10057144. Please reach out to customer service if you need help placing an order. Glad to be of help!
Was this helpful?
Thank you for voting!
Related Parts:
Related Parts Additional or alternate parts to consider.
View More
View Less
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Daniel from MONTGOMERY, LA
- Parts Used:
- WPW10006384
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers, Socket set
Belt was worn
Unplug electricity. Disconnect water lines and drain line so you can tilt machine on its side. Take two screws out that holds pulley cover. Take screwdriver to gently remove old belt off pulley by turning and removing belt. Place new belt on motor sprocket first and then gently turn pulley while applying tension on gear case pulley.
... Read more
Be careful belt is tracking correctly or it will cause damage to new belt. Place pulley guard by on with the two screws and reconnect hoses, drain hose and electrical plug. Finished.
Read less
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
★
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Frank F - May 3, 2021
Verified Purchase
Super tight fit.
It took several times to get the belt on the pulleys. The tightness solved the slipping on the transmission pulley.
Model Compatibility
This part works with the following models:
Fix Number: FIX11747978
Manufacturer Part Number: WPW10006384
Manufacturer Part Number: WPW10006384
Brand
Model Number
Description
✖
Mail-In Recycling Rebate