Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
Rinse Aid Cap WP8564929
$18.78
In Stock
- Fix Number:
- FIX11746567
- Manufacturer #:
- WP8564929
- Manufactured by:
- Whirlpool
- Product Description
- This rinse aid cap or fill cap is for your dishwasher and it screws into the jet dry dispenser. Sometimes the cap can become loose and fall out, which can cause it to melt from the heater. If your cap is damaged or missing, this is the part you will need to replace it. It is made of white plastic and is a little more than an inch in diameter. This rinse aid cap is sold individually.
- Works with the following brands:
- KitchenAid, Jenn-Air, Whirlpool, Kenmore
- Works with the following products
- Dishwasher
- Fixes the following symptoms
- Will not dispense detergent, Leaking, Not cleaning dishes properly, Not drying dishes properly
- Part# WP8564929 replaces these:
- AP6013341, 8564929
Part Number Cross Reference
Product Description
This rinse aid cap or fill cap is for your dishwasher and it screws into the jet dry dispenser. Sometimes the cap can become loose and fall out, which can cause it to melt from the heater. If your cap is damaged or missing, this is the part you will need to replace it. It is made of white plastic and is a little more than an inch in diameter. This rinse aid cap is sold individually.
-
Works with the following brands:KitchenAid, Jenn-Air, Whirlpool, Kenmore
-
Works with the following products:Dishwasher
-
Fixes the following symptoms:Will not dispense detergent, Leaking, Not cleaning dishes properly, Not drying dishes properly
-
Part# WP8564929 replaces these:AP6013341, 8564929
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts Additional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Gerard from Danielson, CT
- Parts Used:
- WP8564929
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
cap came off and landed on heating element and melted.
removed from plastic bag and installed in dispenser. pretty simple i say.
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Thomas from Ephrata, PA
- Parts Used:
- WP8564929
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Rinse Aid cap fell out during wash cycle and heating elements melted the cap,
Just replaced with new cap
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- JEFF from Coeur D Alene, ID
- Parts Used:
- WP8564929, W10083957V
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
1.)The rinse cap had fallen and was burned by the heating element. 2.) The chopper assembly was worn and clogged.
The recommendation on the web site suggested the highest probability of not getting the dishes clean properly was the chopper assembly. It is not too difficult to disassemble the components to get to the chopper assembly and clean out all the debris. Took a long nose pliers and a great deal of patience. After dozens of attempts and abou
... Read more
t 40+minutes, it went into the proper grooves and the top went on and was screwed it back together. The machine now works like new. I'll be ordering the door pulley assembly next due to a lot of noise during closing and opening the door.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Roxanne M from Las Vegas, NV
- Parts Used:
- WP8564929
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Rinse Aid Cap Fried During Operation
What must have been a loose cap came out during operation and landing on the heating coils. The new one had to be screwed in. Simple. However, the cavity is filled with water instead of rinse aid product and since I can't figure out how to empty it, I guess I can't put rinse aid in until it gets used during run cycles.
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX11746567
Manufacturer Part Number: WP8564929
Manufacturer Part Number: WP8564929
Brand
Model Number
Description
✖
Mail-In Recycling Rebate