Watch the install video
11744487-1-M-Whirlpool-WP7403P239-60-Range 8 Infinite Burner Switch
Part Location Diagram of WP7403P239-60 Whirlpool Range 8 Infinite Burner Switch
See part 12 in the diagram
Replacing your Maytag Range Range 8 Infinite Burner Switch
11744487-1-S-Whirlpool-WP7403P239-60-Range 8 Infinite Burner Switch 360 view
( Grid squares measure 1x1 inch )
11744487-1-S-Whirlpool-WP7403P239-60-Range 8 Infinite Burner Switch 11744487-2-S-Whirlpool-WP7403P239-60-Range 8 Infinite Burner Switch 11744487-1-S-Whirlpool-WP7403P239-60-Range 8 Infinite Burner Switch 360 view
Part Location Diagram of WP7403P239-60 Whirlpool Range 8 Infinite Burner Switch Replacing your Maytag Range Range 8 Infinite Burner Switch

Range 8 Infinite Burner Switch WP7403P239-60

Works With Model CEP3760AAW!
★★★★★
★★★★★
1 Review

Rated by 7 customers 

?

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$56.93
In Stock
Fix Number:
FIX11744487
Manufacturer #:
WP7403P239-60
Manufactured by:
Whirlpool
Works With Model CEP3760AAW!

Jump to:

Product Description

This infinite switch for eight inch range burners is almost three inches long. This infinite switch is for 8-inch range burners. When an element is unable to produce any heat on a modern oven, the problem may lie with the infinite switch. This switch is responsible for sending power to the surface elements. Check the element and terminal block to ensure they are working properly. If they are in working order, check the infinite switch at the control panel for any wires that have overheated, or broken terminals to or from the infinite switch. If the infinite switch is damaged or malfunctioning, it will need to be replaced. Remember to unplug your range before beginning this repair.

  • Works with the following brands:
    Maytag, Magic Chef, Crosley, Whirlpool
  • Works with the following products:
    Range, Cooktop, Microwave Oven Combo, Wall Oven
  • Fixes the following symptoms:
    Element will not heat, Will Not Start, Oven is too hot
  • Part# WP7403P239-60 replaces these:
    AP6011291, 7403P239-60, 7403P372-60, WP7403P239-60VP
Works with the following brands:
Maytag, Magic Chef, Crosley, Whirlpool
Works with the following products
Range, Cooktop, Microwave Oven Combo, Wall Oven
Fixes the following symptoms
Element will not heat, Will Not Start, Oven is too hot
Part Number Cross Reference
Part# WP7403P239-60 replaces these:
AP6011291, 7403P239-60, 7403P372-60, WP7403P239-60VP

Videos For installing this part.

Replacing your Range 8 Infinite Burner Switch

Replacing your Range 8 Infinite Burner Switch

Questions and Answers

Be the first to ask our experts a question about this part!

Washer Affresh Cleaner
$12.54
In Stock
Part Number: FIX1960673
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Cleaner
$18.43
In Stock
Part Number: FIX12346712
This cooktop cleaning kit includes a scraper and scrub pad that remove build-up and cooked-on spills without scratching or harming your cooktop surfaces and a non-abrasive cleaner that is safe for all glass and ceramic c...
Appliance Cleaner
$23.93
In Stock
Part Number: FIX16227489
This cleaner is ideal for ventilation, microwaves, cooktops, refrigeration, and stainless steel surfaces. It easily removes burnt-on debris and greasy residues. Can be used on kitchen cabinets, countertops, tile and stee...
Affresh Dishwasher Cleaner Tablets - 6
$19.04
In Stock
Part Number: FIX12345667
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Scratch B Gone Stainless Steel Scratch Remover Kit
$126.64
In Stock
Part Number: FIX2340672
This product permanently removes scratches, stains and rust from all brushed surfaces on stainless steel appliances, grills, sinks and more. This is for use on true stainless steel products only
Stainless Steel Cleaner
$15.56
In Stock
Part Number: FIX12717775
Our scratch-free, streak-free formula removes fingerprints, smudges, grease, dirt and oil, while protecting and polishing to repel dust and dirt. Use on all stainless steel appliance brands and surfaces. Stainless Steel ...

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.0 / 5.0, 7 reviews.
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Richard from Colfax, WA
Parts Used:
WP7403P239-60
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
8" burner (no heat conrol
Replaced burner plate switch. Now works fine.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from Navarre, FL
Parts Used:
WP7403P239-60
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
element would go to full heat at low knob settings
Unplug range from outlet. Remove back panel, (4 nut screws). Took off switch knob, removed 2 screws on front panel and removed switch. Set to the side old switch with wires on the switch. Installed switch putting 2 screws on front panel. Put wires on new switch as on old switch. then replacing back panel with 4 nut screw. Plug in ra nge to electrical outlet. Put knob on new switch
Read less
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
George from Graham, NC
Parts Used:
WP7403P239-60
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
Difficult access to screws under switch mounting plate,
Bent interfering plate to provide access to screw, Removed screws at back of switch mounting plate, Video did not show interfering plate,
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Marie from Salmon, ID
Parts Used:
WP7403P239-60
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Radiant Element stayed on high
To make sure this was the part needed, I took the glass top off the top front of the stove to see if the element was broken. No breaks. Received the new part. Disconnected power. Unscrewed the two screws on the front switch, took the top metal back cover off, wire by wire replaced the infinite switch in back, put the two screws back o n the front. Turned power back on. The element went on from low to high to low. Perfect. Then, I asked my husband to put the glass top back on the stove and he crushed the biggest element. Lesson learned.....
Read less
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Doug from Dover, DE
Parts Used:
WP7403P239-60, W10823697
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
element would not heat
Take out 2 small screws under the lip of the stove top. Turned off the electric after I found out it was live under the top... pulled one wire off at a time and matched and installed in the new element.. 2 screws to take out old element and reinstalled 2 screws to the new element. Turned back on the electric and fastened the 2 screws unde r the lip of the top..works great
Read less
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Barbara from Indianapolils, IN
Parts Used:
WP7403P239-60
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Right front 8 in burner had only two settings off or on full red hot.
One wire at a time after removing the back panel. Easy job.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Wanda from Thurman, OH
Parts Used:
WP7403P239-60
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Heater control for right front burner
Removed back panel, unplugged the old part and plugged in the new one. Works great. Saved on ordering and also labor. Got instructions on internet.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
★ Customer Reviews
Average Rating: (1 Review)
5.0
★★★★★
★★★★★
Filter By Rating:
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Tom Y - May 1, 2021
Verified Purchase
Burner switch worked well.
This part was exactly what I needed and it worked well. Only took a few days to be delivered.

Model Compatibility

This part works with the following models:
Fix Number: FIX11744487
Manufacturer Part Number: WP7403P239-60
Brand Model Number Description
Magic Chef 3500PPA Range
Magic Chef 3500PPW Range
Magic Chef 3500PPW-D Range
Magic Chef 3500SPA Range
Magic Chef 3500SPW Range
Magic Chef 3510KPA Range
Magic Chef 3510KPW Range
Magic Chef 3510KRA Range - Freestanding, Electric
Magic Chef 3510KRW Range - Freestanding, Electric
Magic Chef 3510PRA Range - Freestanding, Electric
Magic Chef 3510PRV Range - Freestanding, Electric
Magic Chef 3510PRW Range - Freestanding, Electric
Magic Chef 3512WPA Range
Magic Chef 3512WPW Range
Magic Chef 3512WRA Range
Magic Chef 3512WRW Range
Magic Chef 3520SPA Range
Magic Chef 3520SPW Range
Magic Chef 3520SRA Range
Magic Chef 3520SRW Range
Magic Chef 3521WPA Range - Freestanding, Electric
Magic Chef 3521WPV Range - Freestanding, Electric
Magic Chef 3521WPW Range - Freestanding, Electric
Magic Chef 3521WRA Range - Electric
Magic Chef 3521WRV Range - Electric
Magic Chef 3521WRW Range - Electric
Magic Chef 3521XPA Range
Magic Chef 3521XPW Range
Magic Chef 3521XRA Range - Electric
Magic Chef 3521XRW Range - Electric
Range 8 Infinite Burner Switch
$ 56.93
  In Stock
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.