Part Location Diagram of WP3394508 Whirlpool Dryer Bearing Ring
See part 32 in the diagram
( Grid squares measure 1x1 inch )

Dryer Bearing Ring WP3394508

Works With Model 11098518430!

Rated by 1 customers 

?

Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

?
$85.14
In Stock
Fix Number:
FIX11741469
Manufacturer #:
WP3394508
Manufactured by:
Whirlpool
Works With Model 11098518430!

Product Description

Fits around the front of the drum.

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.9 / 5.0, 1 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Robert from Dallas, TX
Parts Used:
WP3394508
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Front drum bearing wore our, broke and fell into the drum
1) After unplugging the power cord, I removed the lint screen, unscrewed and using a Phillips head scre driver, I removed the two screws attaching the lint screen housing to the cabinet top and popped the top open at the front of the cabinet using the putty knife, swinging the top open. 2) I then disconnected the door switch on the inside of the front panel, removed the two hex-head screws attaching the top of the front panel to the cabinet sides using a nut driver and lifted off the front panel, setting it aside. 3) I then took the new drum bearing and positioned it at the front of the drum opening, aligning the clips into their respective slots inside the drum's front lip. The first two clips went in relatively easily, but as the gasket was somewhat larger in diameter than the inner diameter of the drum, so I had to gently bow the excess plastic of the gasket away from the drum. 4) Once I got the 3rd clip aligned with the slot, I was able to gently snap the gasket against the inside of the drum, forming a compression fit inside the drum and getting the last clip positioned in its respective hole. 5) I re-positioned the front panel onto the two bottom tabs of the cabinet and proceeded to reverse the steps I took in taking the cabinet apart. 6) Once I verified the cabinet was properly assembled, I replaced the lint screen and plugged the power cord into the outlet. 7) I turned on the dryer to test and the dryer ran just fine. 8) DONE!
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX11741469
Manufacturer Part Number: WP3394508
Brand Model Number Description
Kenmore 106508802 Dryer - Kenmore Dryer Model 106.508802 (106508802, 106 508802) Parts
Kenmore 10688419100 Dryer
Kenmore 10688419300 Dryer
Kenmore 110088732791 Washer Dryer Combo
Kenmore 1101820299 Washer Dryer Combo - WASHER DRYER LAUNDRY SYSTEM
Kenmore 110508802 Dryer
Kenmore 1106007714 Dryer
Kenmore 1106007715 Dryer
Kenmore 1106007716 Dryer
Kenmore 1106007717 Dryer
Kenmore 1106008713 Dryer
Kenmore 1106008714 Dryer
Kenmore 1106008715 Dryer
Kenmore 1106008716 Dryer
Kenmore 1106117221 Dryer
Kenmore 1106117230 Dryer
Kenmore 1106117231 Dryer
Kenmore 1106117232 Dryer
Kenmore 1106117233 Dryer
Kenmore 1106117234 Dryer
Kenmore 1106117235 Dryer
Kenmore 1106117240 Dryer
Kenmore 1106117241 Dryer
Kenmore 1106117242 Dryer
Kenmore 1106117243 Dryer
Kenmore 1106117244 Dryer
Kenmore 1106117245 Dryer
Kenmore 1106117250 Dryer
Kenmore 1106117251 Dryer
Kenmore 1106117252 Dryer