Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
Filter-A/C Foam 493537S
$7.06
In Stock
- Fix Number:
- FIX8983404
- Manufacturer #:
- 493537S
- Manufactured by:
- Briggs and Stratton
- Product Description
- This part includes one OEM certified foam pre-cleaner for a small engine. This filter is crucial for maintaining a smooth-running engine by adding an extra layer of protection from dirt and debris. Replacing this filter should be part of your regular tune-up procedure. Please note that the paper filter and cover are sold separately. This pre-cleaner air filter is installed on the filter cartridge. Do not oil the pre-cleaner, as it should be completely dry when installed.
- Works with the following brands:
- Briggs and Stratton, Toro, Simplicity, Craftsman
- Works with the following products
- Engine, Lawn Mower, Pressure Washer
Product Description
This part includes one OEM certified foam pre-cleaner for a small engine. This filter is crucial for maintaining a smooth-running engine by adding an extra layer of protection from dirt and debris. Replacing this filter should be part of your regular tune-up procedure. Please note that the paper filter and cover are sold separately. This pre-cleaner air filter is installed on the filter cartridge. Do not oil the pre-cleaner, as it should be completely dry when installed.
-
Works with the following brands:Briggs and Stratton, Toro, Simplicity, Craftsman
-
Works with the following products:Engine, Lawn Mower, Pressure Washer
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts Additional or alternate parts to consider.
View More
View Less
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
change the filter and foam
Loosen the black screw on side of mower and remove the filter and foam. Insert both the same way old ones were positioned, paper part of filter pointing away from the side of mower, and foam with sponge side against paper part on filter. (Screen side of foam facing out) Tighten the screw and you're finished.
4 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The chipper sat for many years without being used. The carb was gummed up and the plastic fuel inlet was leaking.
1) Just remove the air cleaner assembly.
2) Remove the fuel line clamp and then pull the fuel line off the fuel inlet; if there is gas in the tank, you can either drain it, or you can stick a 5/16" bolt into the line to plug it.
3) Remove the carburetor.
4) Reassemble in reverse order (The carburetor came with the appropr ... Read more iate gaskets.)
2) Remove the fuel line clamp and then pull the fuel line off the fuel inlet; if there is gas in the tank, you can either drain it, or you can stick a 5/16" bolt into the line to plug it.
3) Remove the carburetor.
4) Reassemble in reverse order (The carburetor came with the appropr ... Read more iate gaskets.)
Read less
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX8983404
Manufacturer Part Number: 493537S
Manufacturer Part Number: 493537S
Brand
Model Number
Description
✖
Mail-In Recycling Rebate