Part Location Diagram of WPW10111905 Whirlpool Dryer Door Catch
See part 24 in the diagram
Replacing your Whirlpool Dryer Dryer Door Catch
( Grid squares measure 1x1 inch )

Dryer Door Catch WPW10111905

Works With Model MGD6600TQ1!
★★★★★
★★★★★
1 Review

Rated by 7 customers 

?

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$7.34
In Stock
Fix Number:
FIX11748369
Manufacturer #:
WPW10111905
Manufactured by:
Whirlpool
Works With Model MGD6600TQ1!

Product Description

The door catch is a metal piece found on the inside dryer door, which helps to keep the door closed. If the catch is broken the door may not stay securely shut, which can result in the dryer not starting. The door catch would be considered the female part, and the door strike would be the male part (which is sold separately and not as a kit). Replacing the broken catch is an easy repair. Use a putty knife to pop out the top and bottom of the catch, then pull out the entire part from the door. Slide the new part into the opening, and firmly press to latch it into place. You are done! This is a genuine OEM part, which ensures it will be the proper fit for your appliance.

Videos For installing this part.

Replacing your Dryer Door Catch

Replacing your Dryer Door Catch

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.8 / 5.0, 7 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Susan from Arkdale, WI
Parts Used:
WPW10111905
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Door Catch broke door would not stay closed.
I just pushed it in with a little extra push. Fixed.
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Marian from FRESNO, CA
Parts Used:
WPW10111905
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
The dryer door would not close as door catch was broken
I followed the other poster and used needle nosed pliers to try to remove broken door catch. I could not successfully remove it but I WAS ABLE in 20 seconds to DISLODGE it and to let it fall into the door! I quickly slipped in the new DOORCATCH part. It clicked in and it works like a CHARM!
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jeff from NEW KENSINGTN, PA
Parts Used:
WPW10111905
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
Door not closing
Not fixed. Could not remove broken door catch. Video made it look easy. Not
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
JIM from oCALA, FL
Parts Used:
WPW10111905
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
door catch spring broken
repair was so easy I didn't have to refer to "Appliance repair for dummies". I used pliers to squeeze and remove the old catch and my thumb to push the new one into place.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Mary from Highland Village, TX
Parts Used:
WPW10111905
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
Catch on the dryer would not work.
I used a pair of needle nose pliers to catch the top and bottom of the latch, squeezed gently and pulled the broken one out. Took the new one and pushed it in and it works wonderfully. Any one can do it.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John R from Stockton, CA
Parts Used:
WPW10111905
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
door gasket
Removed old dyer door gasket replaced same
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Fernando from San Antonio, TX
Parts Used:
WPW10111905
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
dryer door would not close
removed old door catch with putty knife and inserted new part.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Customer Reviews
Average Rating: (1 Review)
5.0
★★★★★
★★★★★
Filter By Rating:
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Model Compatibility

This part works with the following models:
Fix Number: FIX11748369
Manufacturer Part Number: WPW10111905
Brand Model Number Description
Kenmore 11067032600 Dryer
Kenmore 11067032601 Dryer
Kenmore 11067042600 Dryer
Kenmore 11067042601 Dryer
Kenmore 11067052600 Dryer
Kenmore 11067062600 Dryer
Kenmore 11067072600 Dryer
Kenmore 11067082600 Dryer
Kenmore 11067086600 Dryer
Kenmore 11067087600 Dryer
Kenmore 11067092600 Dryer
Kenmore 11068062800 Dryer
Kenmore 11068062801 Dryer
Kenmore 11068072800 Dryer
Kenmore 11068072801 Dryer
Kenmore 11068082700 Dryer
Kenmore 11068082701 Dryer
Kenmore 11068087701 Dryer
Kenmore 11068092700 Dryer
Kenmore 11068092701 Dryer
Kenmore 11068097701 Dryer
Kenmore 11068102310 Dryer - 27" ELECTRIC DRYER
Kenmore 11068103310 Dryer - ELECTRIC DRYER
Kenmore 11077032600 Dryer
Kenmore 11077032601 Dryer
Kenmore 11077042600 Dryer
Kenmore 11077042601 Dryer
Kenmore 11077052600 Dryer
Kenmore 11077062600 Dryer
Kenmore 11077072600 Dryer