Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
Rear Drum Bearing Kit WE25M40
Works With Model DBSR453EB3WW!
$88.09
In Stock
- Fix Number:
- FIX267529
- Manufacturer #:
- WE25M40
- Manufactured by:
- GE
Works With Model DBSR453EB3WW!
- Product Description
- This rear drum bearing kit is a genuine OEM replacement for your dryer. The kit includes a shaft, ground strap, bracket, bearing and seven screws for installation. The bearing supports that back of the dryer drum and helps to reduce friction so that the drum can rotate smoothly and quietly. If the bearing has worn out, it can result in your dryer not tumbling, or making excessive noise when it is running.
- Works with the following brands:
- General Electric, Hotpoint, Kenmore, RCA
- Works with the following products
- Dryer, Washer Dryer Combo
- Fixes the following symptoms
- Noisy, Marks left on clothes
- Part# WE25M40 replaces these:
- AP2619300, 784658, WE25M40, WE01X0462, WE01X0463, WE02X0195, WE03M0015, WE03M0065, WE03X0022, WE03X0028, WE03X0031, WE03X0035, WE03X0036, WE03X0039, WE03X0065, WE11X0056, WE11X0062, WE11X56, WE11X62, WE1X462 ... Show more , WE1X463, WE25M0040, WE25X0062, WE25X0205, WE25X205, WE25X205E, WE25X205R, WE25X62, WE25X62R, WE2X195, WE2X195D, WE3M15, WE3M65, WE3X22, WE3X28, WE3X31, WE3X35, WE3X36, WE3X39, WE3X65 Show less
Part Number Cross Reference
Product Description
This rear drum bearing kit is a genuine OEM replacement for your dryer. The kit includes a shaft, ground strap, bracket, bearing and seven screws for installation. The bearing supports that back of the dryer drum and helps to reduce friction so that the drum can rotate smoothly and quietly. If the bearing has worn out, it can result in your dryer not tumbling, or making excessive noise when it is running.
-
Works with the following brands:General Electric, Hotpoint, Kenmore, RCA
-
Works with the following products:Dryer, Washer Dryer Combo
-
Fixes the following symptoms:Noisy, Marks left on clothes
-
Part# WE25M40 replaces these:AP2619300, 784658, WE25M40, WE01X0462, WE01X0463, WE02X0195 ... Show more , WE03M0015, WE03M0065, WE03X0022, WE03X0028, WE03X0031, WE03X0035, WE03X0036, WE03X0039, WE03X0065, WE11X0056, WE11X0062, WE11X56, WE11X62, WE1X462, WE1X463, WE25M0040, WE25X0062, WE25X0205, WE25X205, WE25X205E, WE25X205R, WE25X62, WE25X62R, WE2X195, WE2X195D, WE3M15, WE3M65, WE3X22, WE3X28, WE3X31, WE3X35, WE3X36, WE3X39, WE3X65 Show less
Videos For installing this part.
Replacing your Rear Drum Bearing Kit
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts Additional or alternate parts to consider.
View More
View Less
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Stephen from Bridgewater, NJ
- Parts Used:
- WH02X10383, WH38X10017, WH02X10265, WE03X29897, WH01X10302, WH2X1199, WH2X1198, WH2X1197, WE25M40
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
noisy
New shaft, belt and housing. Installation was going fine until went to install belt and IT was way to short .THANKS
5 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from Kill Devil Hills, NC
- Parts Used:
- WE25M40
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Pliers, Screw drivers, Socket set
dryer was squeaking
I followed the you-tube directions. The only problem I encountered was reinstalling the drive belt on the motor and pulley. Directions recommended that you seat the drum in place and reach back to the pulley and seat the belt by feel. I had no luck so I pulled the drum forward where I could see the motor and pulley then I seated the bel
... Read more
t and carefully pushed the drum back pulling the drive belt forward as I went until the drum was all the way back and seated.
Read less
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Cheap screws supplied with Drum Bearing kit
Kit labeled Genuine GE and the brackets and bearing were fine - better bearing material than original. Problem was the bracket mounting holes were punched and designed for "self-tapping" screws. Not what was supplied. Supplied screws had no tapered thread at tip and no chip-cutting relief to do the cutting. Impossible to properly star
... Read more
t the screws in the punched holes. Luckily, I saved the 19 yr old screws which were proper "self-tapping" design. Chucked bracket in vise - precut threads and then installed in drum. Otherwise easy repair and wife's happy with her dryer again.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Diane from Tahoe City, CA
- Parts Used:
- WE03X29897, WE25M40
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Socket set
Squeeky when it was turned on
Repair went well but the dryer still squeeks for a couple of minute when it is turned on. Watched UTube.
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Super squeaky
Took top& 1side off, belt ,removed old parts replaced with new ones (gas dryer) needed two people to tilt back to remove bottom screws !relatively EASY.
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from Hope Mills, NC
- Parts Used:
- WE25M40
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Socket set
noise coming from dryer
As described in the video posted at your website. I like to commend the technician in the video. He did a excellent job in explaining how to take apart, replace the item and put it all back together. .
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Clayton, NC
- Parts Used:
- WE25M40
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
drum would not turn
Unplug machine. Removed screws in top of door that holds top on. Tilt top back. Remove 2 screws on side that holds front panel on. Slide panel to side.In rear of machine remove access panel to remove belt. Remove one screw to access hole to drum bearing. Remove drum by picking up belt to lift drum. Lift drum out. Remove 3 screws that hold
... Read more
s bearing stud on install new stud. Remove 4 screws that hold on bearing. Install new bearing. Use a spot of wheel bearing grease, install drum, install belt. Install rear panels. Install front and top. Test
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Harold from Angleton, TX
- Parts Used:
- WE25M40
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers, Socket set
Rear drum bearing was going bad, dryer drum making noise and banging around while drying clothes.
I just watched the video on how to repair, and went step by step. The only problem was putting the belt back on after re-installing the drum. I made a hook out of a hummingbird feeder wire and reached in to hook the idler wheel arm, using my right hand, then using left hand set the belt back on motor pulley and on the idler wheel. This si
... Read more
te has very good service parts were shipped on time, and all fit perfect.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bad Rear Bearing And Gaskets
Went on to your website and watched the video followed instructions word for word went great never worked on a dryer before this.
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kenneth from Barrington, RI
- Parts Used:
- WE03X25079, WE1M1067, WE03X29897, WE1M504, WE2M96, WE25M40, WE12X83
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers
Dryer was squeeking loudly
Searched Internet for dryer model squeeking. Found probable cusses. Watched video. Took dryer apart found the above parts worn out. Changed the belt and idler pulley just because I had the dryer apart. Less than 50 minutes dryer is fixed. Dryer is like news for $133.00
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- Next >
★
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Roland C Digilio J - September 29, 2020
Verified Purchase
fit properly easy to install
The parts fit well and were easy to install once the dryer was apart. it now runs quietly.
Model Compatibility
This part works with the following models:
Fix Number: FIX267529
Manufacturer Part Number: WE25M40
Manufacturer Part Number: WE25M40
Brand
Model Number
Description
✖
Mail-In Recycling Rebate