Watch the install video
17137205-1-M-GE-WE03X37318-DRYER FRONT BEARING WHITE 2PK
Part Location Diagram of WE03X37318 GE DRYER FRONT BEARING WHITE 2PK
See part 316 in the diagram
Replacing your General Electric Dryer DRYER FRONT BEARING WHITE 2PK
( Grid squares measure 1x1 inch )
17137205-1-S-GE-WE03X37318-DRYER FRONT BEARING WHITE 2PK 17137205-2-S-GE-WE03X37318-DRYER FRONT BEARING WHITE 2PK 17137205-3-S-GE-WE03X37318-DRYER FRONT BEARING WHITE 2PK Part Location Diagram of WE03X37318 GE DRYER FRONT BEARING WHITE 2PK Replacing your General Electric Dryer DRYER FRONT BEARING WHITE 2PK

DRYER FRONT BEARING WHITE 2PK WE03X37318

★★★★★
★★★★★
1 Review

Rated by 44 customers 

?

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$10.99
In Stock
Fix Number:
FIX17137205
Manufacturer #:
WE03X37318
Manufactured by:
GE

Jump to:

Product Description

This single drum bearing slide attaches to the outer-most side of the bearing. This part is also sometimes referred to as a drum slide, drum glide, or drum pad. It provides support to the front of the drum as it rotates. They are approximately 3-inches long, 1 inch wide and made from a durable white plastic. If your appliance starts making unusual sounds, is not drying clothes properly, or leaves marks on clothes, it may be time to replace this part. The dryer has 2 slides, which we recommend replacing at the same time, as they tend to wear out at the same rate. You will need to order 2 of this part to replace both drum bearing slides, since it is sold individually. Before you begin this repair, be sure to disconnect the power to the dryer.

  • Works with the following brands:
    General Electric, Hotpoint, Whirlpool, Kenmore
  • Works with the following products:
    Dryer, Washer Dryer Combo, Washer
  • Fixes the following symptoms:
    Noisy, Marks left on clothes, Drum Not Spinning
  • Part# WE03X37318 replaces these:
    WE01M0333, WE01M0504, WE1M333, WE1M504
Works with the following brands:
General Electric, Hotpoint, Whirlpool, Kenmore
Works with the following products
Dryer, Washer Dryer Combo, Washer
Fixes the following symptoms
Noisy, Marks left on clothes, Drum Not Spinning
Part Number Cross Reference
Part# WE03X37318 replaces these:
WE01M0333, WE01M0504, WE1M333, WE1M504

Videos For installing this part.

Replacing your DRYER FRONT BEARING WHITE 2PK

Replacing your DRYER FRONT BEARING WHITE 2PK

Questions and Answers

Be the first to ask our experts a question about this part!

Washer Affresh Cleaner
$12.54
In Stock
Part Number: FIX1960673
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Cleaner
$18.43
In Stock
Part Number: FIX12346712
This cooktop cleaning kit includes a scraper and scrub pad that remove build-up and cooked-on spills without scratching or harming your cooktop surfaces and a non-abrasive cleaner that is safe for all glass and ceramic c...
Appliance Cleaner
$23.93
In Stock
Part Number: FIX16227489
This cleaner is ideal for ventilation, microwaves, cooktops, refrigeration, and stainless steel surfaces. It easily removes burnt-on debris and greasy residues. Can be used on kitchen cabinets, countertops, tile and stee...
Affresh Dishwasher Cleaner Tablets - 6
$19.04
In Stock
Part Number: FIX12345667
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Scratch B Gone Stainless Steel Scratch Remover Kit
$126.64
In Stock
Part Number: FIX2340672
This product permanently removes scratches, stains and rust from all brushed surfaces on stainless steel appliances, grills, sinks and more. This is for use on true stainless steel products only
Stainless Steel Cleaner
$15.56
In Stock
Part Number: FIX12717775
Our scratch-free, streak-free formula removes fingerprints, smudges, grease, dirt and oil, while protecting and polishing to repel dust and dirt. Use on all stainless steel appliance brands and surfaces. Stainless Steel ...

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.8 / 5.0, 44 reviews.
  • 1
  • 2
  • 3
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Donald L. from Belmont, MA
Parts Used:
WE09X27634, WE03X37317, WE3M26, WE03X37318
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Dark marks on clothing; clothing sticking between drum and front panel
Others with the same problem of dark marks on clothing suggested replacing the white and the grey drum slides that slip into the front drum bearing unit. When I open up the dryer, I did find that both the white and grey drum slides on one side of the front drum bearing piece had completely worn away, and some of the drum bearing piece wa s also worn away. I had decided in advance to order both white slides, both grey slides, a new felt seal, and the front drum bearing piece. Possibly I could have reused the old front drum bearing, but the replacement was cheap enough. Three bits of advice: 1) if you replace the felt seal, make sure you get it tucked behind the clips on the door panel; 2) if you replace the front drum bearing piece, once you have the dryer put back together, reach up and pull the plastic drum bearing toward you to be sure it is fully snapped into place; 3) after you replace the slides or felt, the drum will make mild rubbing noises as it turns, so run the dryer with no heat for about 30 minutes to seat the parts.
Read less
8 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Nae from BRENTWOOD, TN
Parts Used:
WE09X27634, WE03X29897, WE05X20431, WE3M26, WE03X37318, WE2M96, WE12X83
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
The dry was making a whining sound. Very loud.
I followed all the video on the website with all the parts I had purchased. Very easy. Just make sure you unplug the dryer first. Thank you,
8 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gerald from Schertz, TX
Parts Used:
WE09X27634, WE03X37317, WE03X37318
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
screeching and catching on to clothes
Followed video instructions. Piece of cake. Thank you!
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from Poulsbo, WA
Parts Used:
WE03X37317, WE03X37318, WE25M40
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Cheap screws supplied with Drum Bearing kit
Kit labeled Genuine GE and the brackets and bearing were fine - better bearing material than original. Problem was the bracket mounting holes were punched and designed for "self-tapping" screws. Not what was supplied. Supplied screws had no tapered thread at tip and no chip-cutting relief to do the cutting. Impossible to properly star t the screws in the punched holes. Luckily, I saved the 19 yr old screws which were proper "self-tapping" design. Chucked bracket in vise - precut threads and then installed in drum. Otherwise easy repair and wife's happy with her dryer again.
Read less
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Vincent from Apopka, FL
Parts Used:
WE09X27634, WE03X37317, WE3M26, WE03X37318
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Takes A Long Time To Dry
Followed the video that was provided on the web site
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
VINCENT FLYNN from FARMINGTON, NH
Parts Used:
WE09X27634, WE03X37317, WE3M26, WE03X37318
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Squeeking
Followed the video instructions provided by this site No confusing, hard to decipher diagrams or written instructions. The whole process took 30 minutes half of which was cleaning out 5 years of accumulated lint.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Donald from Mokena, IL
Parts Used:
WE03X37317, WE03X37318, WE04X25996
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
Igniter failure.
First remove top, two screws just above door when opened. Remove a couple screws holding front to sides and remove front to expose drum bearing slides, mine weren't bad but since I was this far to get to the burner assy, why not replace them. Now the more difficult part - getting to the igniter. It is impossible to get to the igniter wi thout removing the side wall but on my unit there is/was a 4" knock-out in the side wall of the dryer to access or at least see the burner assy. I put the new slides in and replaced the front and top. Then took tin snips and cut a big flap and then opened the side to access the igniter. Now I was able to reach in and easily change the igniter, I then bent the side wall I had cut back into place and with a piece of sheet metal and some mini screws. Now I still had that knock out open so I could see if the new igniter worked and within seconds I had a fire and the dryer was repaired. replace the knock out so that no debris can get into the housing near the fire box.
Read less
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jeff from GLENDALE, AZ
Parts Used:
WE09X27634, WE03X37317, WE3M26, WE03X37318
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Loud squeaky noise
Philiphs screws driver and watched a how to video
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Christine from Nantucket, MA
Parts Used:
WE03X29897, WE03X37318
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
worn drive belt & drum bearing slidesslides
My advice is to watch the instruction video from this site that arrives in the email telling you that your part is shipped. Also if the belt is worn make sure to buy the FOUR bearing slides because they will be paper thin & worn. They cost almost $9.00 each and you need to replace all four but it is worth it! The total cost including ship ping for these parts and to do this repair myself was less than $70.
Read less
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jaeson from State College, PA
Parts Used:
WE03X37318
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
Noisy GE Dryer.
I reviewed some tutorial videos on dryer noises and disassembly videos for my GE model. After opening the dryer, I discovered the noise was caused by a loose blower wheel rubbing against its housing. I first cleaned lint build-up out, then reseated the blower wheel and tightened the retaining screw on it. I test spun the drum by hand t o make sure the blower wheel turned freely without rubbing and noise. So far so good. I could have stopped there since that solved the noise problem BUT I also noticed a few other areas needing attention. Two of the four nylon drum glides were mostly worn through, and two were missing with their retaining tabs on the front drum bearing broken off. I found one missing glide but the other is still hiding out somewhere. So I ordered and installed replacement glides (PS755842) and a new front drum bearing (PS960316). Pretty easy to replace. The duct felt seal (PS9861764) looked a bit worn so I replaced that too. Although the drum belt (PS1766009) and idler pulley wheel (PS265721) seemed ok, I decided to replace these as well since I had everything opened up. The related the videos were really spot-on helpful. After watching them on the computer, I queued them up on my iPhone for quick & convenient reference while working at the dryer. The iPhone flashlight app was handy to have too. The most challenging step was replacing the drum belt. It's just awkward to reach and you are doing it mostly by feel. Not impossible though. Just take your time and note how the belt aligned (one side is grooved) and how it is looped around the drive shaft & idler pulley wheel. I find using a cup is handy for keeping all the screws together. And make sure you have enough space to work. Overall, the whole process was fairly easy.
Read less
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
★ Customer Reviews
Average Rating: (1 Review)
5.0
★★★★★
★★★★★
Filter By Rating:
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Mark E - January 19, 2021
Verified Purchase
perfect replacement
The video on the site and the parts provided made it easy to fix my dryer. It sounds as quiet as a new one now. Money very well spent!

Model Compatibility

This part works with the following models:
Fix Number: FIX17137205
Manufacturer Part Number: WE03X37318
Brand Model Number Description
Kenmore 2661532110 Washer Dryer Combo - LAUNDRY CENTER
General Electric 2661532210 Washer Dryer Combo
General Electric 2661532211 Washer
Kenmore 2661532212 Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore 2661532311 Washer Dryer Combo - LAUNDRY CENTER (ELECTRIC)
Kenmore 2661532312 Washer Dryer Combo - LAUNDRY CENTER
Kenmore 2661532412 Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore 26715321 Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore 2671532110 Washer Dryer Combo - LAUNDRY CENTER
General Electric 2671532210 Washer Dryer Combo
Kenmore 2671532211 Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore 2671532212 Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore 2671532311 Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore 2671532312 Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore 2671532412 Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore 36361532110 Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore 36361532412 Washer Dryer Combo - LAUNDRY CENTER
Kenmore 36361542 Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore 36361542211 Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore 36361542310 Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore 36361542410 Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore 36371532110 Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore 36371542 Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore 36371542211 Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore 36371542310 Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore 36371542410 Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore 363DDE8509RCMAA Dryer
Kenmore 363DDE8509RCMWW Dryer
Kenmore 363DDE9600RCMAA Dryer
General Electric 61140418 Dryer
DRYER FRONT BEARING WHITE 2PK
$ 10.99
  In Stock
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.