Part Location Diagram of 5303937183 Frigidaire Lower Front Felt Seal w/Adhesive
See part 1221 in the diagram
Replacing your Frigidaire Dryer Lower Front Felt Seal w/Adhesive
( Grid squares measure 1x1 inch )

Lower Front Felt Seal w/Adhesive 5303937183

Rated by 4 customers 

?

Really Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

?
$19.77
In Stock
Fix Number:
FIX832645
Manufacturer #:
5303937183
Manufactured by:
Frigidaire

Product Description

Videos For installing this part.

Replacing your Lower Front Felt Seal w/Adhesive

Replacing your Lower Front Felt Seal w/Adhesive

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.2 / 5.0, 4 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Aron from Morley, MI
Parts Used:
137513300, 5303937183, 5303937182
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
The seal went bad from my shirt buttons
Just like the video.. ( thanks ). I will buy from you again....
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from Derry, NH
Parts Used:
137513300, 5303937183, 5303937182
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers
Squeezing, clothes getting stuck.
This is a stacking washer & dryer. The best advice I read was to remove the door. It made the front panel much easier to remove. Removing the upper and lower felt was very easy. I used a sharp chisel to do this. Clothes clips worked great to hold the felts in place while the glue dried. The glides, yes you need 2 of them, just snapped out and back in with no problem. I also ended up replacing the drum bearing which was the cause of the squeezing. You will need a second set of hands to hold the bracket on the back side as the screws go on from the inside. I used an extra dab of grease to hold the grounding ball in place when I installed the bearing as well.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jeremy from Harrisburg, PA
Parts Used:
137513300, 134844410, 5303937183
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
glide broke which ripped off the felt. Led to clothes being ruined
I first removed the top of dryer. Then I unscrewed the 2 mounting screws before undoing the front section . I removed the front section then used a cordless drill w/ the stripping wheel to remove all the remaining felt and glue residue. Finally I finished by the steps of the instruction video.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Thomas from Roaring Spring, PA
Parts Used:
137513300, 137292700, 5303937183, 5303937182, 5303281153
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers
The rear drum bearing back holding bracket fell off and unit is built into wall.
Replacing the rear drum bearing "back of machine bracket" without moving the unit - if it drops off the back. 1. Remove all equipment except for the heating element and housing. 2. Start to remove the bearing cradle and mounting bracket but this is what to do if "you drop the back bracket as I did." 3. After everything is removed from the center back you will see a slop where the metal cradle mounts just below the screw holes and the center hole. 4. Take a piece of thin but strong thread - as nylon - approx. 2' long and just double it. 5. Push the loop end (open ends toward you) through the center hole so you can see it moving through the slot and use any thin instrument to "fish" the loop end through to yourself. 6. Now make sure you have your new kit parts, nut driver, awl, mounting screws, laid out in front of you for easy access. 7. Take the rear mounting bracket (with the 2 holes in it and center tab) and wrap 2 turns of the loop around the center tab while you still have the ends of the thread through the center hole next to you. You can tie one loop if you want - it just makes it harder to take out later but that is ok. 8. Now you are ready to pull the mounting bracket through the slot up to the center hole. It should be now directly centered. 9. Adjust hole and put one screw loosely in while still holding the bracket in place with the thread (keep tight), then tighten the screw tight. 9. Now you are ready to put the cradle, bearing, front mounting bracket (as per video instructions) in place on the open end where the hole is aligned. 10. Tighten the screw snug but still letting you able to move the bracket toward the screw that was holding the back bracket in place. 11. Loosen that screw into place and if needing adjusted - use the awl and finish aligning and installing. 12. Cut the thread and or unloosen and take out. Everything should now be ready for re installation of all other equipment. Wish you the best.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX832645
Manufacturer Part Number: 5303937183
Brand Model Number Description
Kenmore 41761712510 Washer Dryer Combo - LAUNDRY CENTER
Kenmore 41761712511 Washer Dryer Combo - Kenmore 41761712511 Laundry Center
Kenmore 41761722510 Washer Dryer Combo - LAUNDRY CENTER
Kenmore 41761722511 Washer Dryer Combo - Laundry Center
Kenmore 41761723510 Washer Dryer Combo - LAUNDRY CENTER
Kenmore 41761723511 Washer Dryer Combo - Laundry Center
Kenmore 41761732810 Washer Dryer Combo - Laundry Center
Kenmore 41761733810 Washer Dryer Combo - Laundry Center
Kenmore 41761733811 Washer Dryer Combo - Kenmore 41761733811 Laundry Center Combo
Kenmore 41764182300 Dryer
Kenmore 41771712510 Washer Dryer Combo - LAUNDRY CENTER
Kenmore 41771712511 Washer Dryer Combo - LAUNDRY CENTER
Kenmore 41771712512 Washer Dryer Combo - Laundry Center
Kenmore 41771722510 Washer Dryer Combo - LAUNDRY CENTER
Kenmore 41771722511 Washer Dryer Combo - LAUNDRY CENTER
Kenmore 41771722512 Washer Dryer Combo - Laundry Center
Kenmore 41771723510 Washer Dryer Combo - LAUNDRY CENTER
Kenmore 41771723511 Washer Dryer Combo - LAUNDRY CENTER
Kenmore 41771723512 Washer Dryer Combo - Laundry Center
Kenmore 41771732810 Washer Dryer Combo - Laundry Center
Kenmore 41771732811 Washer Dryer Combo - Kenmore 41771732811 Laundry Center Combo
Kenmore 41771733810 Washer Dryer Combo - Laundry Center
Kenmore 41771733811 Washer Dryer Combo - Laundry Center
Kenmore 41774182300 Dryer
Kenmore 41774182301 Dryer
Kenmore 41780412700 Dryer
Kenmore 41782042102 Dryer
Kenmore 41782052102 Dryer
Kenmore 41782052103 Dryer
Kenmore 41782142102 Dryer