The genuine OEM replacement rack stop clip is for dishwashers. It measures just over an inch and is made of gray plastic. The purpose of this part is to prevent your dishwasher rack from pulling out too far and falling out of the dishwasher. If you have difficulties closing your door, your rack continuously falling off, or a door latch failure, you may need to replace this part. They are sold individually and can be used on the right or left side of the upper dish rack. It is recommended to replace both sides at the same time, meaning you will need to order 2 of this part. For this easy repair, start by pulling out the rack, then use your screwdriver to reach behind the rack stops and push on the clips. This should allow you to remove the stops from the track. Next, slide the track back over the rollers and snap the new track stop in place.
Works with the following brands:
KitchenAid, Kenmore, Whirlpool, Jenn-Air
Works with the following products:
Dishwasher
Fixes the following symptoms:
Door won’t close, Door latch failure, Not cleaning dishes properly
Part# WPW10195622 replaces these:
AP6016778, W10195622, WPW10195622VP
Works with the following brands:
KitchenAid, Kenmore, Whirlpool, Jenn-Air
Works with the following products
Dishwasher
Fixes the following symptoms
Door won’t close, Door latch failure, Not cleaning dishes properly
Part Number Cross Reference
Part# WPW10195622 replaces these:
AP6016778, W10195622, WPW10195622VP
Videos For installing this part.
Replacing your Dishwasher Rack Stop Clip
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dennis
February 21, 2024
Need to replace stops on dishwasher front top rack not the back ones
For model number 66513293k115
Hello Dennis, thank you for reaching out. According to our research, the rack stop clips do not come separately. They come along with the drawer track, part number FIX11750072. If you need help placing an order, customer service is open 7 days a week!
This rack adjuster kit is connected to the dishrack and allows you to adjust the height of the upper rack of your dishwasher up and down to give more space. The kit is constructed of gray plastic and metal, and measures ...
This is an authentic OEM replacement drawer track for the upper rack of your dishwasher. Also known as a rack slider bar, it helps to support the top rack and allows it to glide in and out of your dishwasher easily. If i...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This cooktop cleaning kit includes a scraper and scrub pad that remove build-up and cooked-on spills without scratching or harming your cooktop surfaces and a non-abrasive cleaner that is safe for all glass and ceramic c...
This cleaner is ideal for ventilation, microwaves, cooktops, refrigeration, and stainless steel surfaces. It easily removes burnt-on debris and greasy residues. Can be used on kitchen cabinets, countertops, tile and stee...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
This product permanently removes scratches, stains and rust from all brushed surfaces on stainless steel appliances, grills, sinks and more. This is for use on true stainless steel products only
Our scratch-free, streak-free formula removes fingerprints, smudges, grease, dirt and oil, while protecting and polishing to repel dust and dirt. Use on all stainless steel appliance brands and surfaces. Stainless Steel ...
This product permanently removes scratches, stains and rust from all brushed surfaces on stainless steel appliances, grills, sinks and more. This is for use on true stainless steel products only
Our scratch-free, streak-free formula removes fingerprints, smudges, grease, dirt and oil, while protecting and polishing to repel dust and dirt. Use on all stainless steel appliance brands and surfaces. Stainless Steel ...
View Less
Installation Instructions Provided by Fix customers like you.
Average Repair Rating: 4.9 / 5.0, 5 reviews.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
I took out the old clips with a flat screwdriver and popped the new ones in. It took a min to see how to put them together and YOU HAVE TO PUT THE RAIL IN THE DISHWASHER FIRST! It is very tempting to just put the new part in but then you will have a hard time straddling the wheels inside the rail. Once you see how they fit and position th
... Read moreem it is pretty easy to put them in once the rail is inside the washer and in place. These are the only ones I have ever had to replace. I suggest that you keep idiots that pull the top rack out too hard away from it so you do not have to spend 17 plus dollars on some plastic pieces to make your stuff work again. In my case I have co-workers that use it so I just put the part number on the magnet they gave me and the name of what it is called so that next time I will not have to be the one doing it. I could have went to the local parts place but they insisted I needed the exact model number and I had the one from the door but they said it was wrong. I was able somehow to use that number to pull pictures and this part from Google search so the hell with the local people I shopped here instead! The actual model # was in fact on the dishwasher where the door closes by the seal on the left side facing the front of it. It is only on there once while there are at least 2 stickers with the other number I pulled from the door in at least 2 languages. You tell me which is more needed..... yeah I did not need the model number as long as I had the sticker one. Ha Ha local losers at Dey Appliance can suck it! They always act like customers are interrupting them when you call or go in. Not anymore!
The top drawer rear rack stop clips that were sent to me worked fine. The installation was a little bit to figure out. A small diagram blown up would aid because of the small print. After finding the installation way clips snapped in easily. Try and do this by leaving the drawer rails in the washer. Its tight to do and you need to ha
... Read moreve a light with you. Otherwise look at your instruction manual on how to remove the rails without damaging them. Mine had some normal wear and were easy to remove and put back. Hard water hardens the plastic or hot water warps it after time. Company was great. First delivery said it came and I missed it on the front step because of some windy weather. They credited the account and re-ordered the item. It arrived in two days. Nice person on the phone that dealt with my order. I am not sure what her name was but she did a great job. I would buy through this company in the future.
Removed rail from dishwasher. Removed broken stop clip from rail. Applied lubricant to rail where the replacement clip is to be installed. note: I didn't want to break the replacement clip. Replace rail in dishwasher. Install replacement clip.
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
★
Customer Reviews
Average Rating:
(2 Reviews)
5.0
★★★★★
★★★★★
Filter By Rating:
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Daniel M - April 9, 2021
Verified Purchase
Quick & Easy
Product came quick and was just what I needed. Wed site even had a video that made installation a breeze.
Thanks, fix.com, your the best.
★★★★★
★★★★★
ANDREW W - June 29, 2021
Verified Purchase
Rack stop
Old broken part came off in pices. New part went right in with a snap.
No brainer.
Model Compatibility
This part works with the following models:
Fix Number: FIX11750071
Manufacturer Part Number: WPW10195622
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.