Part Location Diagram of 74007736 Whirlpool X-Large Burner Head with Electrode
See part 3 in the diagram
( Grid squares measure 1x1 inch )

X-Large Burner Head with Electrode 74007736

Rated by 2 customers 

?

Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

?
$84.82
In Stock
Fix Number:
FIX2085280
Manufacturer #:
74007736
Manufactured by:
Whirlpool

Product Description

This is the burner head and electrode for your gas range. If your gas igniter glows but will not light, or if the element will not start or heat entirely, you may need to replace the burner head. This burner head is approximately 4¼ inches in diameter and is sold individually. Please note that the mounting screws for this burner head are sold separately. To replace the burner head, simply unscrew the old, defective burner head and screw in the new one.

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 2.7 / 5.0, 2 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
William from Snellville, GA
Parts Used:
74007736
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers
Burner struck intermintently
Swapping out a burner is simple, once you remove the 2 screws. I used a Torx T15 screwdriver, available from your hardware store. However…be prepared for a stubborn screw or 2. DO NOT force a screw – you can snap off the head. If it won’t loosen, soak it with WD40 or Liquid Wrench. Don’t hurry, it may take a day or 2. You can also a pply heat with a soldering iron for a minute or 2. When it begins to move, work it back & forth, like a loose tooth. Once you get one screw out and the other just won’t come, go ahead and snap it off. One screw, plus the stub of the second will suffice to install the new burner. Don’t be discouraged. This is simply to guide you through the worst-case scenario.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Judy from LOS OSOS, CA
Parts Used:
74007736
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Ignighter was cracked and not working. Burner would not light.
Decided to replace the entire burner element instead of just the ignighter. Glad I did. For what I saved doing the repair myself, it was well worth the extra money to have the ignighter properly installed by the factory!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX2085280
Manufacturer Part Number: 74007736
Brand Model Number Description
Jenn-Air JDS8850BDB Range
Jenn-Air JDS8850BDS Range
Jenn-Air JDS8850BDS19 Range - 30" SLIDE-IN DUAL FUEL RANGE
Jenn-Air JDS8850BDW Range
Jenn-Air JDS8850BDW18 Range - 30" SLIDE-IN Dual Fuel Range
Jenn-Air JDS8850CDB00 Range - 30" SLIDE-IN DUAL FUEL RANGE
Jenn-Air JDS8850CDB01 Range - 30" SLIDE-IN DUAL FUEL RANGE
Jenn-Air JDS8850CDR00 Range - 30" SLIDE-IN DUAL FUEL RANGE
Jenn-Air JDS8850CDS00 Range - 30" SLIDE-IN DUAL FUEL RANGE
Jenn-Air JDS8850CDS01 Range - 30" SLIDE-IN DUAL FUEL RANGE
Jenn-Air JDS8850CDS02 Range - 30" SLIDE-IN Dual Fuel Range
Jenn-Air JDS8850CDW00 Range - 30" SLIDE-IN DUAL FUEL RANGE
Jenn-Air JDS8850CDW01 Range - 30" SLIDE-IN DUAL FUEL RANGE
Jenn-Air JDS8860BDP Range
Jenn-Air JDS8860BDP16 Range - 30" GAS DUAL FUEL
Jenn-Air JDS8860BDP17 Range - 30" DUAL FUEL GAS RANGE
Jenn-Air JGC Cooktop - JENNAIR COOKING
Jenn-Air JGC8430BDB Cooktop
Jenn-Air JGC8430BDQ Cooktop
Jenn-Air JGC8430BDS Cooktop
Jenn-Air JGC8430BDW Cooktop
Jenn-Air JGC8536ADB Cooktop
Jenn-Air JGC8536ADQ Cooktop
Jenn-Air JGC8536ADS Cooktop
Jenn-Air JGC8536ADW Cooktop
Jenn-Air JGC8536BDB11 Cooktop - 36" GAS COOKTOP
Jenn-Air JGC8536BDS11 Cooktop - 36" GAS COOKTOP
Jenn-Air JGC8536BDW11 Cooktop - 36" GAS COOKTOP
Jenn-Air JGC9430ADB Cooktop
Jenn-Air JGC9430ADF Cooktop