9472730-1-M-Poulan-530071945-Chainsaw Clutch Washer Kit

( Grid squares measure 1x1 inch )

9472730-1-S-Poulan-530071945-Chainsaw Clutch Washer Kit

9472730-1-S-Poulan-530071945-Chainsaw Clutch Washer Kit 360 view

Replacing your Poulan Chainsaw Chainsaw Clutch Washer Kit

Chainsaw Clutch Washer Kit 530071945

Works With Model PPB4018!

★★★★★

2 Reviews

Rated by 1 customers

Really Easy

Less than 15 mins

Ratings submitted by customers like you who bought this part.

$8.04

Fix Number:: FIX9472730
Manufacturer #:: 530071945
Manufactured by:: Poulan

Works With Model PPB4018!

Jump to:

Product Description
Part Videos
Questions and Answers
Related Parts
Installation Instructions
Customer Reviews
Model Compatibility

Product Description

This is a washer kit for a chainsaw. This kit includes the retaining washer, C-ring, and the washer that is located between the clutch and clutch drum assembly. The outer washer acts like a shoulder to keep the chain on the sprocket as well as helps secure the clutch drum to the saw. Due to its consistent contact with the chain, the outer washer is known to deteriorate over time. If the chain is regularly run with minimal tension, this will actually speed up the deterioration and cause the chain to move from side-to-side. The retainer C-clip should be replaced any time it has been removed. For this repair you will need to remove the side cover, the chain, and the bar.

Works with the following brands:

Poulan, Weed Eater
Works with the following products:
Chainsaw

Works with the following brands:: Poulan, Weed Eater
Works with the following products: Chainsaw

Videos For installing this part.

Replacing your Chainsaw Clutch Washer Kit

Questions and Answers

Be the first to ask our experts a question about this part!

Related Parts Additional or alternate parts to consider.

Chainsaw Large Clutch Washer

$6.21

Chainsaw Clutch Assembly

$14.89

Washer Affresh Cleaner

$12.54

Cleaner

$18.43

Appliance Cleaner

$23.93

Affresh Dishwasher Cleaner Tablets - 6

$19.04

Scratch B Gone Stainless Steel Scratch Remover Kit

$126.64

Stainless Steel Cleaner

$15.56

View Less

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 5.0 / 5.0, 1 reviews.

< Prev
1
Next >

Sort by:

Customer:: Chip from TOWNSEND, DE
Parts Used:: 530071945, 530071891
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers, Socket set

Not oiling the bar & chain

Take the (bar) side cover off with the saw-tool, called the scwrench. Loosen the bar and remove the bar and chain. remove the (E) clip from the outside grove of the crank-shaft, with a small screw driver. Be careful not to loose it or over stretch this clip, or you'll have to replace it, which isn't a bad idea anyway. Take note of the pos ... Read more ition of the washers and bearings as they come off with the drive gear and outside clutch bell. I stack these parts in the order they came off. At this point you'll either need a clutch removal tool or block the piston from moving by placing a small piece of rope on top of the piston through the spark plug hole. If you use this method, be sure not to lower the piston to far in the cylinder, or you could get the rope caught in the transfers, and that is a hole new ball of wax. Back to the Clutch shoe assembly, It has reverse threads on it. To remove it, it turns the direction you would usually tighten a bolt, to take it off. CLOCKWAYS.. you can use a hammer with a screwdriver, and a short, but sharp blow to brake the clutch loose. It just spins off after its loose. Place those parts it the order they came off, with the clutch outer drum, bell, whatever you want to call it The plastic part you'll be seeing at this point is the OIL PUMP housing and it is held on with two small phillip head screws. Take note off how the hoses are routed and remove those screws. Pull the whole assembly off, the plastic disc and the hose as one piece. Look and inspect the drive gear which looks like a spring
on the crank shaft. If it is not damaged or showing signs of wear, leave it. If you suspect it, for causing the problem, replace it. The steel drive gear usually flattens the plastic gear on the pump. Now, take the new pump and look at the back side and make sure the pump barrel is all the way in the plastic sleeve and the cutout is in the metal barrel is in line with the pin. Flip it back over and rout the hoes back in the grove making sure the opening of the hose lines up with the grove in the saw body. Now it is a simple reverse order to install the parts you removed earlier. the bearing in the clutch should have a drop, just a small drop of grease rubbed into the bearing before installation. Too much grease will get on the clutch when it's running and that will not be good. After putting the beveled washer, use extreme caution installing the (E) clip, almost never easy, even for pro's.
I would like to point out that the plastic gear that drives the pump shaft is in a very hot place. This being a homeowner type of saw, it's not made to take a lot of abuse. If your leaning on this saw and over heating the clutch getting it stuck in the wood, that little gear has no way to keep it's cool in there. Keep your chain sharp and let the saw do the cutting and that gear will last for years. Thanks for you putting up with my instructions, I'm not a writer, but I see this problem a lot and those pumps are getting hard to find. Good luck with your repair.

Read less

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

< Prev
1
Next >

★ Customer Reviews

Average Rating: (2 Reviews)

5.0

★★★★★

Filter By Rating:

< Prev
1
Next >

Sort by:

★★★★★

Verified Purchase

RIGHT PARTS RIGHT QUICK!

★★★★★

Verified Purchase

Clutch parts

Great service

Model Compatibility

This part works with the following models:

Fix Number: FIX9472730
Manufacturer Part Number: 530071945

Brand	Model Number	Description
Poulan	967063801	Chainsaw - Gas Chainsaw
Poulan	P3314	Chainsaw - Gas Chainsaw
Poulan	P3314WS	Chainsaw - Gas Chainsaw
Poulan	P3314WSA	Chainsaw - Gas Chainsaw
Poulan	P3416	Chainsaw - Gas Chainsaw
Poulan	P3516PR	Chainsaw - Gas Chainsaw
Poulan	P3816	Chainsaw - Gas Chain Saw Type 1
Poulan	P3818	Chainsaw - Chainsaw
Poulan	P3818AV	Chainsaw - Gas Chainsaw
Poulan	P4018	Chainsaw - Gas Chainsaw
Poulan	P4018AV	Chainsaw - Gas Chainsaw
Poulan	P4018AV-BH	Chainsaw - Gas Chainsaw
Poulan	P4018WM	Chainsaw - Gas Chainsaw
Poulan	P4018WT	Chainsaw - Gas Chainsaw
Poulan	P4018WTL	Chainsaw - Gas Chainsaw
Poulan	PP3416	Chainsaw - Gas Chainsaw
Poulan	PP3516	Chainsaw - Gas Chainsaw
Poulan	PP3516AVX	Chainsaw - Gas Chainsaw
Poulan	PP3816	Chainsaw - Gas Chainsaw
Poulan	PP3816AV	Chainsaw - Gas Chainsaw
Poulan	PP4018	Chainsaw - Gas Chainsaw
Poulan	PP4218	Chainsaw - Gas Saw
Poulan	PP4218AV	Chainsaw - Gas Chainsaw
Poulan	PP4218AVHD	Chainsaw - Gas Chainsaw
Poulan	PP4218AVL	Chainsaw - Gas Chainsaw
Poulan	PP4218AVX	Chainsaw - Gas Chainsaw
Poulan	PPB3416	Chainsaw - Gas Chainsaw
Poulan	PPB4018	Chainsaw - Gas Chainsaw
Poulan	PPB4218	Chainsaw - Chain Saw
Poulan	PR4218	Chainsaw - Gas Chainsaw